Design and operation of a bunched-beam, phase-spread measurement
Conference
·
OSTI ID:10176993
A bunch-length monitor system has measured the relative changes in the temporal beam-bunch length of an H{sup {minus}}, 2.5 MeV beam. This system includes a non interceptive electromagnetic probe, associated RF processing electronics, and an software algorithm. The probe is an axial symmetric capacitive pickup whose output signal is proportional to the bunched beam image currents traveling through its bore. The RF electronics processes the beam-induced signal into a ratio of its fundamental and fifth-harmonic Fourier components and provides a time-varying output voltage proportional to the phase length of the beam-bunch. This paper reviews the measurement hardware, software algorithm, and operational experience.
- Research Organization:
- Los Alamos National Lab., NM (United States)
- Sponsoring Organization:
- Department of Defense, Washington, DC (United States)
- DOE Contract Number:
- W-7405-ENG-36
- OSTI ID:
- 10176993
- Report Number(s):
- LA-UR--92-2728; CONF-9208109--20; ON: DE92040230
- Country of Publication:
- United States
- Language:
- English
Similar Records
Design and operation of a bunched-beam, phase-spread measurement
A fifth harmonic rf bunch monitor for the ANL-APS electron linac
Measurement of the instantaneous 200-MHz bunch currents at 750 keV for the CERN Linac 2
Conference
·
Tue Dec 31 23:00:00 EST 1991
·
OSTI ID:7015934
A fifth harmonic rf bunch monitor for the ANL-APS electron linac
Conference
·
Thu Jul 01 00:00:00 EDT 1993
·
OSTI ID:10176255
Measurement of the instantaneous 200-MHz bunch currents at 750 keV for the CERN Linac 2
Conference
·
Mon Aug 01 00:00:00 EDT 1983
· IEEE Trans. Nucl. Sci.; (United States)
·
OSTI ID:5507862