Vacuum tests of a beamline front-end mock-up at the Advanced Photon Source
A-mock-up has been constructed to test the functioning and performance of the Advanced Photon Source (APS) front ends. The mock-up consists of all components of the APS insertion-device beamline front end with a differential pumping system. Primary vacuum tests have been performed and compared with finite element vacuum calculations. Pressure distribution measurements using controlled leaks demonstrate a better than four decades of pressure difference between the two ends of the mock-up. The measured pressure profiles are consistent with results of finite element analyses of the system. The safety-control systems are also being tested. A closing time of {approximately}20 ms for the photon shutter and {approximately}7 ms for the fast closing valve have been obtained. Experiments on vacuum protection systems indicate that the front end is well protected in case of a vacuum breach.
- Research Organization:
- Argonne National Lab., IL (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- W-31109-ENG-38
- OSTI ID:
- 10174847
- Report Number(s):
- ANL/XFD/CP-82936; CONF-940714-8; ON: DE94016891
- Resource Relation:
- Conference: 5. international meeting on synchrotron radiation instrumentation,Stony Brook, NY (United States),18-22 Jul 1994; Other Information: PBD: [1994]
- Country of Publication:
- United States
- Language:
- English
Similar Records
Vacuum tests of a beamline front-end mock-up at the Advanced Photon Source
The first photon shutter development for APS insertion device beamline front ends