Evaluation of the interfacial mechanical properties in fiber-reinforced ceramic composites
- Oak Ridge National Lab., TN (United States)
- New Mexico Inst. of Mining and Technology, Socorro, NM (United States)
The present study examined the application of a micro-indentation technique to the measurement of interfacial properties in fiber reinforced ceramic composites. Specific fiber/matrix systems included SiC/glass, SiC/macro-defect-free (MDF) cement, SiC/SiC, and mullite/glass. The effect of fiber coatings upon the interfacial properties was also investigated. These properties, which included the debond strength, interfacial shear stress, and residual axial fiber stress, were evaluated by measuring the force-displacement curves generated during load-unload cycles. Estimates of these three stress values were obtained by matching the experimental force-displacement curves with data predicted from an existing model. In general the SiC/glass composites exhibited the lowest values of the interfacial shear and debond stresses. The sliding characteristics of the SiC/MDF cement and SiC/SiC composites were strongly influenced by the residual axial stress and the nature of the fiber coating. In the case of the mullite/glass composite, the high values of the interfacial shear and debond stresses reduced the measurement sensitivity, thereby increasing the uncertainty in the estimates of the interfacial properties. 17 refs, 6 figs, 1 tab.
- Research Organization:
- Oak Ridge National Lab., TN (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC05-84OR21400
- OSTI ID:
- 10164658
- Report Number(s):
- CONF-930164--10; ON: DE93015494
- Country of Publication:
- United States
- Language:
- English
Similar Records
Evaluation of interfacial properties of fiber-reinforced ceramic composites using fiber push-in tests
Evaluation of interfacial properties of fiber-reinforced ceramic composites using fiber push-in tests