Finalized design of the SSC RFQ-DTL matching section

Conference · Sat May 01 00:00:00 EDT 1993

OSTI ID:10164320

Haworth, M; Combs, C; Datte, P; Enegren, T; Funk, W; Goren, Y; Guy, F; Hurd, J; Jamieson, G; Martin, D; Ringwall, A; Sethi, R; Swenson, D ^[1]; Barlow, D; Kraus, R; Meyer, R ^[2]

---

1. Superconducting Super Collider Lab., Dallas, TX (United States)
2. Los Alamos National Lab., NM (United States)

The RFQ-DTL matching section has four variable field quadrupole magnets in a FODO lattice to match the 2.5-MeV, 27-mA, H{sup {minus}} beam from the RFQ to the acceptance space of the DTL, as well as to provide beam steering. In addition, there are two rf buncher cavities to provide longitudinal phase space tuning. An ensemble of beam diagnostics including input and output beam current toroids and beam position monitors, a wire scanner for beam profile measurements, a slit and collector device for beam emittance measurements, and a Faraday cup is used to quantify the matching section performance. The finalized design of the major components of the RFQ-DTL matching section is presented as well as the status of its construction.

• Research Organization: Superconducting Super Collider Lab., Dallas, TX (United States)
• Sponsoring Organization: USDOE, Washington, DC (United States)
• DOE Contract Number: AC35-89ER40486
• OSTI ID: 10164320
• Report Number(s): SSCL-Preprint--393; CONF-930511--181; ON: DE93015912
• Country of Publication: United States
• Language: English

Related Subjects

43 PARTICLE ACCELERATORS
430303
ALIGNMENT
BEAM BUNCHERS
BEAM EMITTANCE
BEAM MONITORS
BEAM POSITION
BEAM PROFILES
DESIGN
DRIFT TUBES
EXPERIMENTAL FACILITIES AND EQUIPMENT
LINEAR ACCELERATORS
PHASE SPACE
QUADRUPOLES
RF SYSTEMS
SUPERCONDUCTING MAGNETS
SUPERCONDUCTING SUPER COLLIDER
TUNING