Overview and status of RF systems for the SSC Linac
Conference
·
OSTI ID:10164293
The Superconducting Super Collider (SSC) Linear Accelerator (Linac) produces a 600-MeV, 35-{mu}s, H-beam at a 10-Hz repetition rate. The beam is accelerated by a series of RF cavities. These consist of a Radio Frequency Quadrupole (RFQ), two bunchers, and four Drift Tube Linac (DTL) tanks at 427.617 MHz, and two bunchers, nine side-coupled Linac modules, and an energy compressor at 1282.851 MHz. The RFQ amplifier and the low-frequency buncher cavity amplifiers use gridded tubes, while the other cavities use klystron amplifier systems. The RF control system consists of a reference line and cavity feedback and feedforward loops for each amplifier. The RF amplifier system for each of these accelerator cavities is described, and the current status of each system is presented.
- Research Organization:
- Superconducting Super Collider Lab., Dallas, TX (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC35-89ER40486
- OSTI ID:
- 10164293
- Report Number(s):
- SSCL-Preprint--272; CONF-930511--174; ON: DE93016102
- Country of Publication:
- United States
- Language:
- English
Similar Records
Overview of the Superconducting Super Collider RF systems [Book Chapter]
THE RF SYSTEM DESIGN FOR THE SPALLATION NEUTRON SOURCE
The SSC RFQ-DTL matching section buncher cavities
Conference
·
Mon May 06 00:00:00 EDT 1991
· Conference Record of the 1991 IEEE Particle Accelerator Conference
·
OSTI ID:5660119
THE RF SYSTEM DESIGN FOR THE SPALLATION NEUTRON SOURCE
Conference
·
Fri Jun 01 00:00:00 EDT 2001
·
OSTI ID:783277
The SSC RFQ-DTL matching section buncher cavities
Conference
·
Sat May 01 00:00:00 EDT 1993
·
OSTI ID:10160459