Practical aspects of on-load generator testing. Final report

Technical Report · Sat May 01 04:00:00 EDT 1993

OSTI ID:10159853

Hajagos, L M ^[1]

---

1. Ontario Hydro, Toronto, ON (Canada). Research Div.

In order to validate the generator equivalent circuit models produced by fitting the parameters to standstill frequency response (SSFR) measurements, on-load generator data is required to be used to compare, match and iteratively improve simulated model responses. This report describes the results of on-load tests performed on the turbogenerator at Atikokan, Ontario, Canada and includes reports on the results of standstill and small-signal open-circuit tests in the Appendices. The on-load tests comprised the on-line frequency responses (OLFR), steady-state measurements for the purpose of determining direct and quadrature axis saturation parameters, and transient response measurements including line switchings and over- and under-excitation step changes. The OLFR measurements were not accurate enough to be used for generator model improvement. However, applying separate direct and quadrature axis saturation parameters to the SSFR equivalent circuit model produced the closest simulation match to the measured transients when compared to other equivalent circuit models of the Atikokan generator.

• Research Organization: Electric Power Research Inst., Palo Alto, CA (United States); Ontario Hydro, Toronto, ON (Canada). Research Div.
• Sponsoring Organization: Electric Power Research Inst., Palo Alto, CA (United States)
• OSTI ID: 10159853
• Report Number(s): EPRI-TR--102351; ON: UN93013857
• Country of Publication: United States
• Language: English

Related Subjects

13 HYDRO ENERGY
130700
42 ENGINEERING
420200
ELECTRIC GENERATORS
ELECTRICAL EQUIPMENT
FACILITIES, EQUIPMENT, AND TECHNIQUES
FREQUENCY RESPONSE TESTING
LEADING ABSTRACT
ON-SITE INSPECTION
POWER SYSTEMS
POWER-CONVERSION SYSTEMS
STABILITY
TRANSIENTS
TURBOGENERATORS