Vibration study of the APS storage ring girder/support assembly equipped with wedge-type alignment jacks
The primary objective of this study is to evaluate and test the new girder/support assembly design from a vibration standpoint, and to determine what, if any, conditions could lead to unacceptable vibration response. There are also two secondary objectives: Determine whether smaller sliding-wedge-type jacks are needed to anchor the large alignment jacks to the lower pedestal, or if standard bolts are acceptable. Determine whether modifications to the large alignment jacks are required in order to limit unwanted horizontal motion. The modifications involve restraining the horizontal motion of the sliding-wedge jacks by six setscrews.
- Research Organization:
- Argonne National Lab., IL (United States). Materials and Components Technology Div.
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- W-31109-ENG-38
- OSTI ID:
- 10146240
- Report Number(s):
- ANL/APS/IN/VIB-92/2; ON: DE92014023
- Resource Relation:
- Other Information: PBD: Feb 1992
- Country of Publication:
- United States
- Language:
- English
Similar Records
Vibration study of the APS storage ring girder/support assembly equipped with wedge-type alignment jacks
Vibration study of the APS storage ring 0. 8 meter quadrupole/girder assembly
Vibration study of the APS storage ring 0.8 meter quadrupole/girder assembly
Technical Report
·
Sat Feb 01 00:00:00 EST 1992
·
OSTI ID:10146240
Vibration study of the APS storage ring 0. 8 meter quadrupole/girder assembly
Technical Report
·
Wed May 01 00:00:00 EDT 1991
·
OSTI ID:10146240
Vibration study of the APS storage ring 0.8 meter quadrupole/girder assembly
Technical Report
·
Wed May 01 00:00:00 EDT 1991
·
OSTI ID:10146240