skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Calcium Film Based Testing of Edge-Seal Materials for Photovoltaic Applications (Presentation)

Abstract

Because of the sensitivity of some photovoltaic devices to moisture-induced corrosion, they are packaged using impermeable front- and back-sheets with an edge seal to prevent moisture ingress. Evaluation of edge seal materials can be difficult because of the low permeation rates involved and/or non-Fickian behavior. Here, using a Ca film deposited on a glass substrate, we demonstrate theevaluation of edge seal materials in a manner that effectively duplicates their use in a photovoltaic application and compare the results with standard methods for measuring water vapor transport. We demonstrate how moisture permeation data from polymer films can be used to estimate moisture ingress rates and compare the results of these two methods. Encapsulant materials were also evaluated forcomparison and to highlight the need for edge seals. Of the materials studied, dessicant-filled polyisobutene materials demonstrate by far the best potential to keep moisture out for a 20 to 30 year lifetime.

Authors:
; ;
Publication Date:
Research Org.:
National Renewable Energy Lab. (NREL), Golden, CO (United States)
Sponsoring Org.:
USDOE Office of Energy Efficiency and Renewable Energy (EERE)
OSTI Identifier:
1013271
Report Number(s):
NREL/PR-5200-50838
TRN: US201110%%566
DOE Contract Number:  
AC36-08GO28308
Resource Type:
Conference
Resource Relation:
Conference: Presented at the Polymers in Photovoltaics Conference, 12-14 April 2011, Cologne, Germany; Related Information: NREL (National Renewable Energy Laboratory)
Country of Publication:
United States
Language:
English
Subject:
14 SOLAR ENERGY; 36 MATERIALS SCIENCE; CALCIUM; CORROSION; EVALUATION; GLASS; LIFETIME; MOISTURE; POLYMERS; SENSITIVITY; TESTING; TRANSPORT; WATER VAPOR; photovoltaic; edge seal; moisture

Citation Formats

Kempe, M, Dameron, A, and Reese, M. Calcium Film Based Testing of Edge-Seal Materials for Photovoltaic Applications (Presentation). United States: N. p., 2011. Web.
Kempe, M, Dameron, A, & Reese, M. Calcium Film Based Testing of Edge-Seal Materials for Photovoltaic Applications (Presentation). United States.
Kempe, M, Dameron, A, and Reese, M. Fri . "Calcium Film Based Testing of Edge-Seal Materials for Photovoltaic Applications (Presentation)". United States. https://www.osti.gov/servlets/purl/1013271.
@article{osti_1013271,
title = {Calcium Film Based Testing of Edge-Seal Materials for Photovoltaic Applications (Presentation)},
author = {Kempe, M and Dameron, A and Reese, M},
abstractNote = {Because of the sensitivity of some photovoltaic devices to moisture-induced corrosion, they are packaged using impermeable front- and back-sheets with an edge seal to prevent moisture ingress. Evaluation of edge seal materials can be difficult because of the low permeation rates involved and/or non-Fickian behavior. Here, using a Ca film deposited on a glass substrate, we demonstrate theevaluation of edge seal materials in a manner that effectively duplicates their use in a photovoltaic application and compare the results with standard methods for measuring water vapor transport. We demonstrate how moisture permeation data from polymer films can be used to estimate moisture ingress rates and compare the results of these two methods. Encapsulant materials were also evaluated forcomparison and to highlight the need for edge seals. Of the materials studied, dessicant-filled polyisobutene materials demonstrate by far the best potential to keep moisture out for a 20 to 30 year lifetime.},
doi = {},
journal = {},
number = ,
volume = ,
place = {United States},
year = {2011},
month = {4}
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share: