Neutral gas compression in the Alcator C-Mod divertor, experimental observations

Conference · Tue Nov 01 04:00:00 EST 1994

OSTI ID:10124018

Niemczewski, A; LaBombard, B; Lipschultz, B; McCracken, G

One of the high heat flux solutions envisioned for ITER is the gas target divertor. This scheme requires high neutral pressure to be sustained in the divertor chamber with a minimal effect on the pressure in the main tokamak chamber (i.e. high gas compression). The neutral gas compression has been studied in the Alcator C-Mod closed divertor under various central and edge plasma conditions. The neutral pressure measured by a fast, in-situ, ionization gauge, installed behind the divertor target plate was compared with the midplane pressure, measured by a shielded Bayard-Alpert gauge. Divertor pressures up to 30 mTorr with compression factors p{sub div}/p{sub mid} {le} 70 have been observed. It has been found that the neutral pressure in the divertor does not depend strongly on the fueling location but rather on the core plasma density and the resulting divertor plasma regime. Divertor detachment leads to a considerable drop in the compression ratio, suggesting a partial {open_quotes}unplugging{close_quotes} of the divertor volume. An examination of the local particle flux balance in the divertor indicates that the single most important factor determining divertor pressure and compression is the private-flux plasma channel opacity to neutrals.

• Research Organization: Massachusetts Inst. of Tech., Cambridge, MA (United States). Plasma Fusion Center
• Sponsoring Organization: USDOE, Washington, DC (United States)
• DOE Contract Number: AC02-78ET51013
• OSTI ID: 10124018
• Report Number(s): DOE/ET/51013--308; PFC/RR--94-13; CONF-941101--6; ON: DE95007762
• Country of Publication: United States
• Language: English

Related Subjects

70 PLASMA PHYSICS AND FUSION TECHNOLOGY
700420
ALCATOR DEVICE
COMPRESSION
DIVERTORS
NEUTRAL PARTICLES
PLASMA-FACING COMPONENTS
PRESSURE GRADIENTS