Advances in methods for deepwater TLP installations
- SEA Engineering Associates, Inc., Houston, TX (United States)
This paper describes a method suitable for installing deepwater TLP structures in water depths beyond 3,000 ft. An overview is presented of previous TLP installation, wherein an evaluation is made of the various methods and their suitability to deepwater applications. A novel method for installation of deepwater TLP`s is described. This method of installation is most suitable for deepwater and/or large TLP structures, but can also be used in moderate water depth as well. The tendon installation method utilizes the so-called Platform Arrestor Concept (PAC), wherein tendon sections are transported by barges to site, and assembled vertically using a dynamically position crane vessel. The tendons are transferred to the platform where they are hung off until there are a full complement of tendons. The hull lock off operation is performed on all tendons simultaneously, avoiding dangerous platform resonant behavior. The installation calls for relatively simple installation equipment, and also enables the use of simple tendon tie-off equipment, such as a single piece nut.
- OSTI ID:
- 100727
- Report Number(s):
- CONF-950116--; ISBN 0-7918-1291-X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Development of deepwater fields using MOSES small TLP
Active control of coupled dynamic response of TLP hull and tendon