A fusion reactor design with a liquid first wall and divertor.
- Lawrence Livermore National Laboratory, Livermore, CA
- University of Wisconsin
- University of California, Los Angeles, CA
- University of California, San Diego, CA
- Princeton Plasma Physics Laboratory
- Oak Ridge National Laboratory, Oak Ridge, TN
- Idaho National Energy and Environmental Laboratory
Within the magnetic fusion energy program in the US, a program called APEX is investigating the use of free flowing liquid surfaces to form the inner surface of the chamber around the plasma. As part of this work, the APEX Team has investigated several possible design implementations and developed a specific engineering concept for a fusion reactor with liquid walls. Our approach has been to utilize an already established design for a future fusion reactor, the ARIES-RS, for the basic chamber geometry and magnetic configuration, and to replace the chamber technology in this design with liquid wall technology for a first wall and divertor and a blanket with adequate tritium breeding. This paper gives an overview of one design with a molten salt (a mixture of lithium, beryllium and sodium fluorides) forming the liquid surfaces and a ferritic steel for the structural material of the blanket. The design point is a reactor with 3840 MW of fusion power of which 767 MW is in the form of energetic particles (alpha power) and 3073 MW is in the form of neutrons. The alpha plus auxiliary power total 909 MW of which 430 MW is radiated from the core mostly onto the first wall and the balance flows into the edge plasma and is distributed between the first wall and the divertor. In pursuing the application of liquid surfaces in APEX, the team has developed analytical tools that are significant achievements themselves and also pursued experiments on flowing liquids. This work is covered elsewhere, but the paper will also note several such areas to indicate the supporting science behind the design presented. Significant new work in modeling the plasma edge to understand the interaction of the plasma with the liquid walls is one example. Another is the incorporation of magneto-hydrodynamic (MHD) effects in fluid modeling and heat transfer.
- Research Organization:
- Sandia National Laboratories (SNL), Albuquerque, NM, and Livermore, CA (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 1005402
- Report Number(s):
- SAND2003-3661J; FEDEEE; TRN: US1101130
- Journal Information:
- Proposed for publication in a special issue of Fusion Engineering & Design., Vol. 72, Issue 1-3; ISSN 0920-3796
- Country of Publication:
- United States
- Language:
- English
Similar Records
Integrated Liquid Metal Flowing First Wall and Open-Surface Divertor for Fusion Nuclear Science Facility: Concept, Design, and Analysis
Spiral Blanket: An Innovative Idea for a Solid Wall Blanket with Potential for High Neutron Wall Loading