Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Beam Beam Collisions at the PEP-II B Factory

Technical Report ·
DOI:https://doi.org/10.2172/10007· OSTI ID:10007

We describe first beam collisions at the PEP-II B Factory, a collaboration of SLAC, LBNL, and LLNL. The beams are brought close to each other in the transverse (x, y) and longitudinal (timing) directions through the use of two shared beam position monitors located 0.72 m from either side of the interaction point (IP). Transverse beam-beam deflection scans and the use of a zero-angle luminosity detector allow us to center the collisions. Beam collisions were also seen by exciting one beam at its tune frequency and observing a response in the other beam at the same frequency. Shifts in betatron tunes have also been measured. To date, the peak measured luminosity attained is 5.2 {+-} 1 x 10{sup 32} cm{sup {minus}2} s{sup {minus}1} with 786 bunches in each beam and with beam currents of 354 mA for the high-energy beam (HEB) and 680 mA for the low-energy beam (LEB).

Research Organization:
Stanford Linear Accelerator Center, Menlo Park, CA (US)
Sponsoring Organization:
USDOE Office of Energy Research (ER) (US)
DOE Contract Number:
AC03-76SF00515
OSTI ID:
10007
Report Number(s):
SLAC-PUB-8058
Country of Publication:
United States
Language:
English

Similar Records

The beam-stay-clear definition of the PEP-II B Factory
Conference · Sat Jun 01 00:00:00 EDT 1996 · OSTI ID:621770

IR Up Grade Plans for the PEP-II B-Factory
Technical Report · Wed Jul 07 00:00:00 EDT 2004 · OSTI ID:827330

Interaction region design at the PEP-II B Factory
Conference · Sat Jun 01 00:00:00 EDT 1996 · OSTI ID:621793