CATALYSTS NHI Thermochemical Systems FY 2009 Year-End Report
Fiscal Year 2009 work in the Catalysts project focused on advanced catalysts for the decomposition of sulfuric acid, a reaction common to both the Sulfur-Iodine (S-I) cycle and the Hybrid Sulfur cycle. Prior years’ effort in this project has found that although platinum supported on titanium oxide will be an acceptable catalyst for sulfuric acid decomposition in the integrated laboratory scale (ILS) project, the material has short comings, including significant cost and high deactivation rates due to sintering and platinum evaporation. For pilot and larger scale systems, the catalyst stability needs to be improved significantly. In Fiscal Year 2008 it was found that at atmospheric pressure, deactivation rates of a 1 wt% platinum catalyst could be reduced by 300% by adding either 0.3 wt% iridium (Ir) or 0.3 wt% ruthenium (Ru) to the catalyst. In Fiscal Year 2009, work focused on examining the platinum group metal catalysts activity and stability at elevated pressures. In addition, simple and complex metal oxides are known to catalyze the sulfuric acid decomposition reaction. These metal oxides could offer activities comparable to platinum but at significantly reduced cost. Thus a second focus for Fiscal Year 2009 was to explore metal oxide catalysts for the sulfuric acid decomposition reaction. In Fiscal Year 2007 several commercial activated carbons had been identified for the HI decomposition reaction; a reaction specific to the S-I cycle. Those materials should be acceptable for the pilot scale project. The activated carbon catalysts have some disadvantages including low activity at the lower range of reactor operating temperature (350 to 400°C) and a propensity to generate carbon monoxide in the presence of water that could contaminate the hydrogen product, but due to limited funding, this area had low priority in Fiscal Year 2009. Fiscal Year 2009 catalyst work included five tasks: development, and testing of stabilized platinum based H2SO4 catalysts, development and testing of metal oxide based H2SO4 catalysts, support of the ILS for catalyst studies, conducting a long term catalyst stability test at anticipated operating temperatures and pressures, and developing capabilities for conducting pressurized catalyst tests.
- Research Organization:
- Idaho National Laboratory (INL)
- Sponsoring Organization:
- DOE - NE
- DOE Contract Number:
- AC07-05ID14517;
- OSTI ID:
- 1000529
- Report Number(s):
- INL/EXT-09-16797
- Country of Publication:
- United States
- Language:
- English
Similar Records
Pt/TiO2 (Rutile) Catalysts for Sulfuric Acid Decomposition in Sulfur-Based Thermochemical Water-Splitting Cycles
Stability of Supported Platinum Sulfuric Acid Decomposition Catalysts for use in Thermochemical Water Splitting Cycles
XPS studies of Pt catalysts supported on porous carbon
Journal Article
·
Tue Apr 01 04:00:00 UTC 2008
· Applied Catalysis A - General
·
OSTI ID:932250
Stability of Supported Platinum Sulfuric Acid Decomposition Catalysts for use in Thermochemical Water Splitting Cycles
Journal Article
·
Thu Mar 01 04:00:00 UTC 2007
· International Journal of Hydrogen Energy
·
OSTI ID:912361
XPS studies of Pt catalysts supported on porous carbon
Journal Article
·
Mon May 23 04:00:00 UTC 2016
· AIP Conference Proceedings
·
OSTI ID:22608688
Related Subjects
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS
ACTIVATED CARBON
ATMOSPHERIC PRESSURE
CARBON MONOXIDE
CATALYSTS
DEACTIVATION
decomposition of sulfuric acid
EVAPORATION
Hybrid sulfur cycle
HYDROGEN
IRIDIUM
OXIDES
PLATINUM
RUTHENIUM
SINTERING
STABILITY
SULFUR CYCLE
SULFURIC ACID
TESTING
TITANIUM OXIDES
WATER
ACTIVATED CARBON
ATMOSPHERIC PRESSURE
CARBON MONOXIDE
CATALYSTS
DEACTIVATION
decomposition of sulfuric acid
EVAPORATION
Hybrid sulfur cycle
HYDROGEN
IRIDIUM
OXIDES
PLATINUM
RUTHENIUM
SINTERING
STABILITY
SULFUR CYCLE
SULFURIC ACID
TESTING
TITANIUM OXIDES
WATER