The design for the LCLS rf photo-injector
We report on the design of the rf photoinjector of the Linac Coherent Light Source (LCLS). The rf photoinjector is required to produce a single 150 MeV bunch of {approximately}1 nC and {approximately}100 A peak current at a repetition rate of 120 Hz with a normalized rms transverse emittance of {approximately}1 {pi} mm-mrad. The design employs a 1.6-cell S-band rf gun with an optical spot size at the cathode of a radius of {approximately}1 mm and a pulse duration with an rms sigma of {approximately}3 ps. The peak rf field at the cathode is 150 MV/m with extraction 57 {degree} ahead of the rf peak. A solenoidal field near the cathode allows the compensation of the initial emittance growth by the end of the injection linac. Spatial and temporal shaping of the laser pulse striking the cathode will reduce the compensated emittance even further. Also, to minimize the contribution of the thermal emittance from the cathode surface, while at the same time optimizing the quantum efficiency (QE), the laser wavelength for a Cu cathode should be tunable around 260 nm. Following the injection linac the geometric emittance simply damps linearly with energy growth. PARMELA simulations show that this design will produce the desired normalized emittance, which is about a factor of two lower than has been achieved to date in other systems. In addition to low emittance, we also aim for laser amplitude stability 1% in the UV and a timing jitter in the electron beam of 0.5 ps rms, which will lead to less than 10% beam intensity fluctuation after the electron bunch is compressed in the main linac.
- Research Organization:
- SLAC National Accelerator Lab., Menlo Park, CA (United States)
- Sponsoring Organization:
- USDOE Office of Energy Research (ER) (US)
- DOE Contract Number:
- AC03-76SF00515
- OSTI ID:
- 10003
- Report Number(s):
- SLAC-PUB-8054; TRN: US0103286
- Resource Relation:
- Other Information: PBD: 29 Jan 1999
- Country of Publication:
- United States
- Language:
- English
Similar Records
The Next Generation Photoinjector
A proposed injector for the LCLS linac