Formation of ZnTe:Cu/Ti Contacts at High Temperature for CdS/CdTe Devices: Preprint
We study the performance of CdS/CdTe thin-film devices contacted with ZnTe:Cu/Ti of various thickness at a higher-than-optimum temperature of {approx}360 C. At this temperature, optimum device performance requires the same thickness of ZnTe:Cu as for similar contacts formed at a lower temperature of 320 C. C-V analysis indicates that a ZnTe:Cu layer thickness of {approx}< 0.5 mu m does not yield the degree of CdTe net acceptor concentration necessary to reduce space charge width to its optimum value for n-p device operation. The thickest ZnTe:Cu layer investigated (1 mu m) yields the highest CdTe net acceptor concentration, lowest value of Jo, and highest Voc. However, performance is limited for this device by poor fill factor. We suggest poor fill factor is due to Cu-related acceptors compensating donors in CdS.
- Research Organization:
- National Renewable Energy Lab. (NREL), Golden, CO (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC36-99-GO10337
- OSTI ID:
- 891462
- Report Number(s):
- NREL/CP-520-39804; TRN: US200621%%925
- Resource Relation:
- Conference: Presented at the 2006 IEEE 4th World Conference on Photovoltaic Energy Conversion (WCPEC-4), 7-12 May 2006, Waikoloa, Hawaii
- Country of Publication:
- United States
- Language:
- English
Similar Records
Dependence of Carrier Lifetime on Cu-Contacting Temperature and ZnTe:CU Thickness in CdS/CdTe Thin Film Solar Cells
Spectroscopic Cathodoluminescence Studies of the ZnTe:Cu Contact Process for CdS/CdTe Solar Cells: Preprint