Prediction of Coal ash leaching behavior in acid mine water, comparison of laboratory and field studies
Strongly alkaline fluidized bed combustion ash is commonly used to control acid mine drainage in West Virginia coal mines. Objectives include acid neutralization and immobilization of the primary AMD pollutants: iron, aluminum and manganese. The process has been successful in controlling AMD though doubts remain regarding mobilization of other toxic elements present in the ash. In addition, AMD contains many toxic elements in low concentrations. And, each mine produces AMD of widely varying quality. So, predicting the effect of a particular ash on a given coal mine's drainage quality is of particular interest. In this chapter we compare the results of a site-specific ash leaching procedure with two large-scale field applications of FBC ash. The results suggested a high degree of predictability for roughly half of the 25 chemical parameters and poor predictability for the remainder. Of these, seven parameters were successfully predicted on both sites: acidity, Al, B, Ba, Fe, Ni and Zn while electrical conductivity, Ca, Cd, SO4, Pb and Sb were not successfully predicted on either site. Trends for the remaining elements: As, Ag, Be, Cu, Cr, Hg, Mg, Mn, pH, Se Tl and V were successfully predicted on one but not both mine sites.
- Research Organization:
- Savannah River Site (SRS), Aiken, SC (United States)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- AC09-96SR18500
- OSTI ID:
- 838804
- Report Number(s):
- WSRC-TR-2005-00018; TRN: US200508%%510
- Resource Relation:
- Other Information: PBD: 10 Jan 2005
- Country of Publication:
- United States
- Language:
- English
Similar Records
Metal release from fly ash upon leaching with sulfuric acid or acid mine drainage
Injection of alkaline ashes into underground coal mines for acid mine drainage abatement