Klystron equalization for RF feedback
The next generation of colliding beam storage rings support higher luminosities by significantly increasing the number of bunches and decreasing the spacing between respective bunches. The heavy beam loading requires large RF cavity detuning which drives several lower coupled bunch modes very strongly. One technique which has proven to be very successful in reducing the coupled bunch mode driving impedance is RF feedback around the klystron-cavity combination. The gain and bandwidth of the feedback loop is limited by the group delay around the feedback loop. Existing klystrons on the world market have not been optimized for this application and contribute a large portion of the total loop group delay. This paper describes a technique to reduce klystron group delay by adding an equalizing filter to the klystron RF drive. Such a filter was built and tested on a 500 kill klystron as part of the on going PEP-II R D effort here at SLAC.
- Research Organization:
- Stanford Linear Accelerator Center, Menlo Park, CA (United States)
- Sponsoring Organization:
- USDOE; USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC03-76SF00515
- OSTI ID:
- 6756640
- Report Number(s):
- SLAC-PUB-6049; CONF-9211172-1; ON: DE93007740
- Resource Relation:
- Conference: International workshop on B factories: accelerators and experiments, Tsukuba (Japan), 17-20 Nov 1992
- Country of Publication:
- United States
- Language:
- English
Similar Records
RF feedback development for the PEP-II B Factory
A Non-invasive Technique for Configuring Low Level RF Feedback Loops in PEP-II
Related Subjects
KLYSTRONS
MODIFICATIONS
RF SYSTEMS
BEAM BUNCHING
COLLIDING BEAMS
FEEDBACK
IMPEDANCE
TRANSFER FUNCTIONS
BEAM DYNAMICS
BEAMS
ELECTRON TUBES
ELECTRONIC EQUIPMENT
EQUIPMENT
FUNCTIONS
MICROWAVE EQUIPMENT
MICROWAVE TUBES
430303* - Particle Accelerators- Experimental Facilities & Equipment