Polycrystalline Thin Film Materials and Devices, Annual Subcontract Report, 16 January 1990 - 15 January 1991
Results and conclusion of Phase I of a multi-year research program on polycrystalline thin film solar cells are presented. The research comprised investigation of the relationships among processing, materials properties and device performance of both CuInSe{sub 2} and CdTe solar cells. The kinetics of the formation of CuInSe{sub 2} by selenization with hydrogen selenide was investigated and a CuInSe{sub 2}/CdS solar cell was fabricated. An alternative process involving the reaction of deposited copper-indium-selenium layers was used to obtain single phase CuInSe{sub 2} films and a cell efficiency of 7%. Detailed investigations of the open circuit voltage of CuInSe{sub 2} solar cells showed that a simple Shockley-Read-Hall recombination mechanism can not account for the limitations in open circuit voltage. Examination of the influence of CuInSe{sub 2} thickness on cell performance indicated that the back contact behavior has a significant effect when the CuInSe{sub 2} is less than 1 micron thick. CdTe/CdS solar cells with efficiencies approaching 10% can be repeatedly fabricated using physical vapor deposition and serial post deposition processing. The absence of moisture during post deposition was found to be critical. Improvements in short circuit current of CdTe solar cells to levels approaching 25 mA/cm{sup 2} are achievable by making the CdS window layer thinner. Further reductions in the CdS window layer thickness are presently limited by interdiffusion between the CdS and the CdTe. CdTe/CdS cells stored without protection from the atmosphere were found to degrade. The degradation was attributed to the metal contact. CdTe cells with ZnTe:Cu contacts to the CdTe were found to be more stable than cells with metal contacts. Analysis of current-voltage and spectral response of CdTe/CdS cells indicates the cell operates as a p-n heterojunction with the diode current dominated by SRH recombination in the junction region of the CdTe.
- Research Organization:
- National Renewable Energy Lab. (NREL), Golden, CO (United States)
- Sponsoring Organization:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE)
- DOE Contract Number:
- AC36-08GO28308
- OSTI ID:
- 6078756
- Report Number(s):
- NREL/TP-214-4502; ON: DE92001171
- Country of Publication:
- United States
- Language:
- English
Similar Records
Fundamentals of polycrystalline thin film materials and devices
Processing and modeling issues for thin-film solar cell devices. Annual subcontract report, January 16, 1994--January 15, 1995
Related Subjects
CADMIUM TELLURIDE SOLAR CELLS
FABRICATION
PERFORMANCE TESTING
COPPER SELENIDE SOLAR CELLS
INDIUM SELENIDE SOLAR CELLS
DEPOSITION
EFFICIENCY
HEAT TREATMENTS
LAYERS
MICROSTRUCTURE
PROGRESS REPORT
THIN FILMS
CRYSTAL STRUCTURE
DIRECT ENERGY CONVERTERS
DOCUMENT TYPES
EQUIPMENT
FILMS
PHOTOELECTRIC CELLS
PHOTOVOLTAIC CELLS
SOLAR CELLS
SOLAR EQUIPMENT
TESTING
polycrystalline thin films
copper indium diselenide
cadmium telluride
solar cells
140501* - Solar Energy Conversion- Photovoltaic Conversion