Penetration Experiments with Limestone Targets and Ogive-Nose Steel Projectiles
We conducted three sets of depth-of-penetration experiments with limestone targets and 3.0 caliber-radius-head (CRH), ogive-nose steel rod projectiles. The limestone targets had a nominal unconfined compressive strength of 60 MPa, a density of 2.31 kg/m{sup 3}, a porosity of 15%, and a water content less than 0.4%. The ogive-nose rod projectiles with length-to-diameter ratios often were machined from 4340 R{sub c} 45 and Aer Met 100 R{sub c} 53 steel, round stock and had diameters and masses of 7.1 mm, 0.020 kg; 12.7 mm, 0.117 kg; and 25.4 mm, 0.931 kg. Powder guns or a two-stage, light-gas gun launched the projectiles at normal impacts to striking velocities between 0.4 and 1.9 km/s. For the 4340 R{sub c} 45 and Aer Met 100 R{sub c} 53 steel projectiles, penetration depth increased as striking velocity increased to a striking velocity of 1.5 and 1.7 km/s, respectively. For larger striking velocities, the projectiles deformed during penetration without nose erosion, deviated from the shot line, and exited the sides of the target. We also developed an analytical penetration equation that described the target resistance by its density and a strength parameter determined from depth of penetration versus striking velocity data.
- Research Organization:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sandia National Lab. (SNL-CA), Livermore, CA (United States)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 5669
- Report Number(s):
- SAND99-0862J; TRN: AH200115%%166
- Journal Information:
- Journal of Applied Mechanics, Other Information: Submitted to Journal of Applied Mechanics; PBD: 8 Apr 1999
- Country of Publication:
- United States
- Language:
- English
Similar Records
The effect of concrete target diameter on projectile deceleration and penetration depth.
Penetration into limestone targets with ogive-nose steel projectiles