skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Technical analysis of filter testing at the U.S. Department of Energy Filter Test Facility

Technical Report ·
DOI:https://doi.org/10.2172/1834370· OSTI ID:1834370
 [1];  [1];  [2]
  1. Southwest Research Institute, San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses
  2. Southwest Research Institute, San Antonio, TX (United States). Powertrain Engineering

The U.S. Department of Energy (DOE) technical standard DOE-STD-3020-2015 requires verification testing at the Filter Test Facility (FTF) of high-efficiency particulate air (HEPA) filters to be installed in nuclear facility (Hazard Category 1, 2, 3, and radiological facilities) confinement ventilation systems, or to be installed in habitability systems (e.g., filters for protection of workers required to act for the control and mitigation of emergency situations). Filters in these applications perform a safety function in accident situations, are designated as important to safety, or are necessary for habitability systems. Different FTFs have operated for decades, and results of tests are available to examine the need for and benefits of continued execution of 100 percent QA verification testing. The objective of this study and resulting report was to assess the need for 100 percent QA testing at the current FTF in Maryland, based on an examination of a database of test results from 2013 to August 2020. Filters that require independent testing per DOE-STD-3020-2015 to be installed in nuclear facilities are sent to the FTF before being shipped to the facilities. The FTF examines the documentation (e.g., certificates of compliance, results of particle penetration and airflow resistance testing by the manufacturers, labels affixed to filters and packages, and other requirements specified in purchase orders by the nuclear facility operators), implements visual inspections of the physical state of the filters, and checks the dimensions of frames. Filters that meet the documentation and visual inspection requirements are subjected to particle penetration and airflow resistance testing. In case of rejections, the filters are shipped back to the manufacturers, at the cost of the manufacturers, for replacement. Filters that pass all tests are shipped to the nuclear facilities.

Research Organization:
Southwest Research Institute, San Antonio, TX (United States)
Sponsoring Organization:
USDOE Office of Environment, Health, Safety and Security (AU)
DOE Contract Number:
89303020PAU000033
OSTI ID:
1834370
Country of Publication:
United States
Language:
English