Hyper-Velocity Nanoparticle Plasma Jet as Fast Probe for Runaway Electrons in Tokamak Disruptions
- FAR-TECH, Inc., San Diego, CA (United States)
The large energy focalized deposition of the runaway electron (RE) beam on the first wall can potentially yield to destructive effects on the reactor vessel during the explosive instability of a major disruption in a large tokamak (e.g. RE beam estimation is multi-MA of ~10 MeV energy in ITER.) Impurity injection is seen as an effective way to suppress REs after thermal quench (TQ). Injected material in solid state is advantageous, but it must be in small size grain form, with large surface-to-mass ratio to facilitate its rapid ablation within plasma. However, the results using shattered pellet injection (SPI), a technique aiming to satisfy these condition, indicated that the relatively unexplored RE evolution phases and RE beam-plasma interaction are far from being properly diagnosed and fully understood. We proposed the idea to probe REs with a pulsed power hyper-velocity large-mass nanoparticle plasma jet (NPPJ). NPPJ provides a high specific surface area and swift injection to core, hence fast increase of three basic parameters: 1) the electron density ne (bound and free through ionization, if the cold post-TQ plasma has a still high enough Te), 2) the effective charge (Zeff ) which rises both the dynamical friction force and plasma resistivity, and, finally, 3) the value of the (Dreicer and critical) threshold E-field above which electrons are accelerated and become REs. But the fast transient phenomena of RE ”seed” creation, RE ”avalanche” multiplication, and RE beam formation and interaction with the background plasma all take place dominantly in the core plasma, where the induction E-field has its maximum. Thus, the RE probe success requires a rapid (1 - 2 ms) injection of sufficient mass able to penetrate through the strong toroidal magnetic field (2 - 5 T) over a long distance (~1 - 2 m) with a large assimilation fraction in the core plasma. As a RE probe, NPPJ is a unique combination of fast response with trigger-to-delivery time of few milliseconds, large mass-velocity (>75 mg at several km/s) and deep injection into post-TQ central plasma. The Objectives of this Category #1 project (concept development) were as follows: 1: We investigated the essential basic physics aspects of creating a plasma with ~1015 to 1016 cm-3 boron nitride (BN) NP density suited for a pulsed power plasma gun acceleration to several km/s. We concluded that, for RE NPPJ probe, BN (diameter Ø10 to 100 nm NPs) are in all respects usable. 2: We advanced solutions to get BN NPPJ by adapting FAR-TECH’s technology for C60 NPPJ. 3: We developed self-consistent models for RE current density jRE(R; t) evolution in the TQ aftermath, with fast and simultaneous increase of ne(R; t) and Zeff (R; t) > 1 upon the specific injection of C60 (i.e. C ions) and BN NP (i.e. B and N ions), respectively. We showed that prompt post-TQ injection and high velocity are of essence in RE probe diagnostics and suppression. 4: We used the in-house HEM-2D code to simulate the C$$_{60}^{q+}$$ NPPJ transverse penetration through tokamak-level B-field (BT ~2 to 5 T) and distance (~1 to 2m), with fragmentation of C$$_{60}^{q+}$$ and developed the algorithm for BNQ+ NPPJ ablative sublimation of BNQ+ NP by the collisions with post-TQ plasma electrons. HEM-2D results indicated that fragmenting C$$_{60}^{1+}$$ NPPJ penetrates up to ~60 cm in 100 us when injecting at 1.6 ms after TQ and gradually released C2 fragments and C ions.
- Research Organization:
- FAR-TECH, Inc., San Diego, CA (United States)
- Sponsoring Organization:
- USDOE Office of Science (SC), Fusion Energy Sciences (FES)
- DOE Contract Number:
- SC0017997
- OSTI ID:
- 1503918
- Report Number(s):
- DOE-FAR-TECH-0017997; FOA-0001624; 0000-0002-4874-9630
- Country of Publication:
- United States
- Language:
- English
Similar Records
DIII-D Studies of Massive Gas Injection Fast Shutdowns for Disruption Mitigation
Getting to the top