Updated Draft ASME Boiler and Pressure Vessel Code Case for Use of Alloy 617 for Construction of Nuclear Components for Section III Division 5
- Idaho National Lab. (INL), Idaho Falls, ID (United States)
Early in the United States’ very high temperature reactor program, several candidate nickel alloys were considered for use in construction of the intermediate heat exchanger. Based primarily on technical maturity, a downselection was made to focus on Alloy 617. After this downselection, the primary goal of the research and development program was to develop sufficient information on the high temperature properties of the material to qualify it for construction of high temperature nuclear components in the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel (BPV) Code. Alloy 617 is a solid solution strengthened material with nominal Ni Cr Co Mo composition, originally developed for aerospace applications such as burner can liners for turbine engines by Huntington Alloys. (Huntington Alloys is now Special Metals Division of Precision Castparts, Inc.) The ASME BPV Code allows use of Alloy 617 for construction of non nuclear pressure vessels, and Alloy 617 is used in fossil fired power plants. Section III, Division 1, Subsection NB of the ASME BPV Code was developed for construction of nuclear components in light water reactors and allows use of ferritic materials up to 700°F and austenitic alloys up to 800°F. Subsection NH of Section III Division 1 was written to allow higher temperature construction with a primary focus on sodium cooled reactors. Recently, a new Division 5 of Section III was published specifically for high temperature reactors (regardless of the primary working fluid) and incorporates both Subsections NB and NH. There are only five alloys currently allowed for use in high temperature nuclear components: 2.25Cr 1 Mo and V modified 9Cr 1Mo steels, Types 304 and 316 stainless steels, and the high nickel austenitic Alloy 800H. This very sparse set of allowed materials is in contrast with the collection of more than 150 materials that are allowed for use in non nuclear pressure vessel construction. A draft Code Case to add Alloy 617 to the list of qualified alloys for use in high temperature nuclear design was submitted to ASME in the early 1990s, but it was withdrawn prior to formal Code action.
- Research Organization:
- Idaho National Lab. (INL), Idaho Falls, ID (United States)
- Sponsoring Organization:
- USDOE Office of Nuclear Energy (NE)
- DOE Contract Number:
- AC07-05ID14517
- OSTI ID:
- 1471711
- Report Number(s):
- INL/EXT-17-42999-Rev001; TRN: US1902868
- Country of Publication:
- United States
- Language:
- English
Similar Records
Perspective on “code qualifying” new graphite grades for use in advanced nuclear reactors*
The Effect of Cold Work on Properties of Alloy 617