Welding and weldability of directionally solidified single crystal nickel-base super-alloys
The objective of this CRADA project was to investigate the weldability of polycrystalline, directionally-solidified, and single-crystal, nickel-base super-alloys. These materials are used extensively in turbine engine components. The ability to weld these materials is highly desirable in that it would greatly facilitate component fabrication. Welding of these materials would also have the potential benefit of allowing for the repair of cracked or worn components. Specifically, the program had four objectives: (1) to evaluate the weldability of nickel-base super-alloys; (2) to characterize the solidification microstructure of the welds; (3) to evaluate the phase stability of the weldments during exposure to service conditions; and (4) to determine the mechanical properties of the welds. Westinghouse Electric Corporation was to supply material for the program, in both as-case and heat-treated form. This was to include commercially available as well as experimental alloys developed at Westinghouse. ORNL was to perform weldability tests on the materials using a variety of welding procedures.
- Research Organization:
- Oak Ridge Y-12 Plant (Y-12), Oak Ridge, TN (United States)
- Sponsoring Organization:
- USDOE Office of Defense Programs (DP) (US)
- DOE Contract Number:
- AC05-84OR21400
- OSTI ID:
- 11013
- Report Number(s):
- Y/AMT-622; Project Number 93-MULT-021-D1-4B; Project Number 93-MULT-021-D1-4B; TRN: AH200127%%555
- Resource Relation:
- Other Information: PBD: 1 Sep 1996
- Country of Publication:
- United States
- Language:
- English
Similar Records
Microstructural, mechanical and weldability assessments of the dissimilar welds between γ′- and γ″-strengthened nickel-base superalloys
Development of directionally solidified eutectic nickel and cobalt alloys. Final report Nov 1974--Nov 1975. [Ni--Cr--W--Al; Ni/sub 3/Al--Mo]