Corrugated Membrane Fuel Cell Structures
- President, Ion Power Inc.
One of the most challenging aspects of traditional PEM fuel cell stacks is the difficulty achieving the platinum catalyst utilization target of 0.2 gPt/kWe set forth by the DOE. Good catalyst utilization can be achieved with state-of-the-art catalyst coated membranes (CCM) when low catalyst loadings (<0.3 mg/cm2) are used at a low current. However, when low platinum loadings are used, the peak power density is lower than conventional loadings, requiring a larger total active area and a larger bipolar plate. This results in a lower overall stack power density not meeting the DOE target. By corrugating the fuel cell membrane electrode structure, Ion Power?s goal is to realize both the Pt utilization targets as well as the power density targets of the DOE. This will be achieved by demonstrating a fuel cell single cell (50 cm2) with a twofold increase in the membrane active area over the geometric area of the cell by corrugating the MEA structure. The corrugating structure must be able to demonstrate the target properties of < 10 mOhm-cm2 electrical resistance at > 20 psi compressive strength over the active area, in combination with offering at least 80% of power density that can be achieved by using the same MEA in a flat plate structure. Corrugated membrane fuel cell structures also have the potential to meet DOE power density targets by essentially packaging more membrane area into the same fuel cell volume as compared to conventional stack constructions.
- Research Organization:
- Ion Power Inc.
- Sponsoring Organization:
- USDOE; USDOE EE Office of Fuel Cell Technologies (EE-2H)
- Contributing Organization:
- Graftech International Holdings Inc., Parma, OH General Motors Corporation, Flint, MI
- DOE Contract Number:
- EE0000462
- OSTI ID:
- 1095120
- Report Number(s):
- DOE-IonPower-0000462
- Country of Publication:
- United States
- Language:
- English
Similar Records
Final Report - MEA and Stack Durability for PEM Fuel Cells
Durability of Low Platinum Fuel Cells Operating at High Power Density