Reduced length design of 9.8 MHz RF accelerating cavity for the positron accumulator ring (PAR) of the Advanced Photon Source (APS)
A 9.8-MHz RF accelerating cavity is developed for the first harmonic system in the APS PAR and an aluminum unit is tested. The design goal si 40 kV at the accelerating gap, Q-factor of {approximately} 7,000 for the accelerating mode, 1.2-m diameter, 1.6-m length with good mechanical strength and stability. The design employs no dielectric or ferrite loading for tuning. The cavity is a plunger-loaded reentrant coaxial structure; the end of the inner conductor facing the wall has a piston-shaped loading structure which consists of a circular disk and a cylinder. The RF characteristic of the cavity was investigated using the URMEL-T and MAFIA programs. Compared with a coaxial structure with lumped element capacitive loading, this design gives improved RF characteristics.
- Research Organization:
- Argonne National Lab., IL (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- W-31109-ENG-38
- OSTI ID:
- 10176604
- Report Number(s):
- ANL/ASD/CP-78341; CONF-930511-315; ON: DE93017703
- Resource Relation:
- Conference: PAC `93: international particle accelerator conference,Washington, DC (United States),17-20 May 1993; Other Information: PBD: [1993]
- Country of Publication:
- United States
- Language:
- English
Similar Records
RF cavities for the positron accumulator ring (PAR) of the Advanced Photon Source (APS)
Design of 118 MHz twelfth harmonic cavity of APS PAR