Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors
Abstract
Development of nuclear grade, iron-based wrought FeCrAl alloys has been initiated for light water reactor (LWR) fuel cladding to serve as a substitute for zirconium-based alloys with enhanced accident tolerance. Ferritic alloys with sufficient chromium and aluminum additions can exhibit significantly improved oxidation kinetics in high-temperature steam environments when compared to zirconium-based alloys. In the first phase, a set of model FeCrAl alloys containing 10–20Cr, 3–5Al, and 0–0.12Y in weight percent, were prepared by conventional arc-melting and hot-working processes to explore the effect of composition on the properties of FeCrAlY alloys. It was found that the tensile properties were insensitive to the alloy compositions studied; however, the steam oxidation resistance strongly depended on both the chromium and the aluminum contents. The second phase development focused on strengthening Fe-13Cr-5Al with minor alloying additions of molybdenum, niobium, and silicon. Combined with an optimized thermo-mechanical treatment, a thermally stable microstructure was produced with improved tensile properties at temperatures up to 741°C.
- Authors:
-
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Publication Date:
- Research Org.:
- Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States). Center for Nanophase Materials Sciences (CNMS)
- Sponsoring Org.:
- USDOE Office of Nuclear Energy (NE), Fuel Cycle Technologies (NE-5); USDOE Office of Nuclear Energy (NE), Nuclear Fuel Cycle and Supply Chain; USDOE Office of Science (SC), Basic Energy Sciences (BES)
- OSTI Identifier:
- 1324043
- Alternate Identifier(s):
- OSTI ID: 1459743
- Grant/Contract Number:
- AC05-00OR22725
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Journal of Nuclear Materials
- Additional Journal Information:
- Journal Volume: 467; Journal Issue: P2; Journal ID: ISSN 0022-3115
- Publisher:
- Elsevier
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS
Citation Formats
Yamamoto, Yukinori, Pint, Bruce A., Terrani, Kurt A., Field, Kevin G., Yang, Ying, and Snead, Lance Lewis. Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors. United States: N. p., 2015.
Web. doi:10.1016/j.jnucmat.2015.10.019.
Yamamoto, Yukinori, Pint, Bruce A., Terrani, Kurt A., Field, Kevin G., Yang, Ying, & Snead, Lance Lewis. Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors. United States. https://doi.org/10.1016/j.jnucmat.2015.10.019
Yamamoto, Yukinori, Pint, Bruce A., Terrani, Kurt A., Field, Kevin G., Yang, Ying, and Snead, Lance Lewis. Mon .
"Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors". United States. https://doi.org/10.1016/j.jnucmat.2015.10.019. https://www.osti.gov/servlets/purl/1324043.
@article{osti_1324043,
title = {Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors},
author = {Yamamoto, Yukinori and Pint, Bruce A. and Terrani, Kurt A. and Field, Kevin G. and Yang, Ying and Snead, Lance Lewis},
abstractNote = {Development of nuclear grade, iron-based wrought FeCrAl alloys has been initiated for light water reactor (LWR) fuel cladding to serve as a substitute for zirconium-based alloys with enhanced accident tolerance. Ferritic alloys with sufficient chromium and aluminum additions can exhibit significantly improved oxidation kinetics in high-temperature steam environments when compared to zirconium-based alloys. In the first phase, a set of model FeCrAl alloys containing 10–20Cr, 3–5Al, and 0–0.12Y in weight percent, were prepared by conventional arc-melting and hot-working processes to explore the effect of composition on the properties of FeCrAlY alloys. It was found that the tensile properties were insensitive to the alloy compositions studied; however, the steam oxidation resistance strongly depended on both the chromium and the aluminum contents. The second phase development focused on strengthening Fe-13Cr-5Al with minor alloying additions of molybdenum, niobium, and silicon. Combined with an optimized thermo-mechanical treatment, a thermally stable microstructure was produced with improved tensile properties at temperatures up to 741°C.},
doi = {10.1016/j.jnucmat.2015.10.019},
journal = {Journal of Nuclear Materials},
number = P2,
volume = 467,
place = {United States},
year = {Mon Oct 19 00:00:00 EDT 2015},
month = {Mon Oct 19 00:00:00 EDT 2015}
}
Web of Science
Works referenced in this record:
Current knowledge on core degradation phenomena, a review
journal, April 1999
- Hofmann, P.
- Journal of Nuclear Materials, Vol. 270, Issue 1-2
Oxidation of Zircaloy by steam
journal, May 1991
- Moalem, M.; Olander, D. R.
- Journal of Nuclear Materials, Vol. 182
Synopsis and outcome of the QUENCH experimental program
journal, July 2010
- Steinbrück, M.; Große, M.; Sepold, L.
- Nuclear Engineering and Design, Vol. 240, Issue 7
Advanced oxidation-resistant iron-based alloys for LWR fuel cladding
journal, May 2014
- Terrani, K. A.; Zinkle, S. J.; Snead, L. L.
- Journal of Nuclear Materials, Vol. 448, Issue 1-3
Preliminary assessment of accident-tolerant fuels on LWR performance during normal operation and under DB and BDB accident conditions
journal, May 2014
- Ott, L. J.; Robb, K. R.; Wang, D.
- Journal of Nuclear Materials, Vol. 448, Issue 1-3
Accident tolerant fuels for LWRs: A perspective
journal, May 2014
- Zinkle, S. J.; Terrani, K. A.; Gehin, J. C.
- Journal of Nuclear Materials, Vol. 448, Issue 1-3
Oxidation Studies on the Iron-Chromium-Aluminum Heater Alloys
journal, January 1959
- Gulbransen, Earl A.; Andrew, Kenneth F.
- Journal of The Electrochemical Society, Vol. 106, Issue 4
High temperature oxidation of fuel cladding candidate materials in steam–hydrogen environments
journal, September 2013
- Pint, B. A.; Terrani, K. A.; Brady, M. P.
- Journal of Nuclear Materials, Vol. 440, Issue 1-3
Oxidation of fuel cladding candidate materials in steam environments at high temperature and pressure
journal, August 2012
- Cheng, Ting; Keiser, James R.; Brady, Michael P.
- Journal of Nuclear Materials, Vol. 427, Issue 1-3
Development of ODS FeCrAl for Compatibility in Fusion and Fission Energy Applications
journal, November 2014
- Pint, B. A.; Dryepondt, S.; Unocic, K. A.
- JOM, Vol. 66, Issue 12
Effect of steam on high temperature oxidation behaviour of alumina-forming alloys
journal, January 2015
- Pint, B. A.; Unocic, K. A.; Terrani, K. A.
- Materials at High Temperatures, Vol. 32, Issue 1-2
Neutronic analysis of candidate accident-tolerant cladding concepts in pressurized water reactors
journal, January 2015
- George, Nathan Michael; Terrani, Kurt; Powers, Jeff
- Annals of Nuclear Energy, Vol. 75
Neutronics and fuel performance evaluation of accident tolerant FeCrAl cladding under normal operation conditions
journal, November 2015
- Wu, Xu; Kozlowski, Tomasz; Hales, Jason D.
- Annals of Nuclear Energy, Vol. 85
Radiation tolerance of neutron-irradiated model Fe–Cr–Al alloys
journal, October 2015
- Field, Kevin G.; Hu, Xunxiang; Littrell, Kenneth C.
- Journal of Nuclear Materials, Vol. 465
The influence of alloying elements on the development and maintenance of protective scales
journal, August 1995
- Stott, F. H.; Wood, G. C.; Stringer, J.
- Oxidation of Metals, Vol. 44, Issue 1-2
The effect of alloying on 485°C embrittlement
journal, August 1976
- Courtnall, M.; Pickering, F. B.
- Metal Science, Vol. 10, Issue 8
The 885° f (475° c) embrittlement of ferritic stainless steels
journal, January 1973
- Grobner, P. J.
- Metallurgical Transactions, Vol. 4, Issue 1
A SANS investigation of the irradiation-enhanced α–α′ phases separation in 7–12 Cr martensitic steels
journal, February 2003
- Mathon, M. H.; de Carlan, Y.; Geoffroy, G.
- Journal of Nuclear Materials, Vol. 312, Issue 2-3
Mapping of 475°C embrittlement in ferritic Fe–Cr–Al alloys
journal, November 2010
- Kobayashi, Satoru; Takasugi, Takayuki
- Scripta Materialia, Vol. 63, Issue 11
Microstructural stability of Fe–Cr–Al alloys at 450–550 °C
journal, February 2015
- Ejenstam, Jesper; Thuvander, Mattias; Olsson, Pär
- Journal of Nuclear Materials, Vol. 457
The effect of Al on the 475°C embrittlement of Fe–Cr alloys
journal, June 2013
- Li, Wei; Lu, Song; Hu, Qing-Miao
- Computational Materials Science, Vol. 74
The effect of heat treatment on recrystallized microstructure, precipitation and ductility of hot-rolled Fe–Cr–Al–REM ferritic stainless steel sheets
journal, February 2013
- Qu, H. P.; Lang, Y. P.; Yao, C. F.
- Materials Science and Engineering: A, Vol. 562
Optimization of Reactive-Element Additions to Improve Oxidation Performance of Alumina-Forming Alloys
journal, April 2003
- Pint, Bruce A.
- Journal of the American Ceramic Society, Vol. 86, Issue 4
Experimental observations in support of the dynamic-segregation theory to explain the reactive-element effect
journal, February 1996
- Pint, B. A.
- Oxidation of Metals, Vol. 45, Issue 1-2
The influence of yttrium additions on the oxide-scale adhesion to an iron-chromium-aluminum alloy
journal, June 1976
- Golightly, F. A.; Stott, F. H.; Wood, G. C.
- Oxidation of Metals, Vol. 10, Issue 3
The mechanism of oxide film formation on austenitic stainless steels in high temperature water
journal, February 1998
- Stellwag, B.
- Corrosion Science, Vol. 40, Issue 2-3
PANDAT software with PanEngine, PanOptimizer and PanPrecipitation for multi-component phase diagram calculation and materials property simulation
journal, June 2009
- Cao, W.; Chen, S. -L.; Zhang, F.
- Calphad, Vol. 33, Issue 2
Thermodynamic modeling and kinetics simulation of precipitate phases in AISI 316 stainless steels
journal, May 2014
- Yang, Y.; Busby, J. T.
- Journal of Nuclear Materials, Vol. 448, Issue 1-3
Elevated temperature ferritic and martensitic steels and their application to future nuclear reactors
journal, October 2005
- Klueh, R. L.
- International Materials Reviews, Vol. 50, Issue 5
Ferritic/martensitic steels for next-generation reactors
journal, September 2007
- Klueh, R. L.; Nelson, A. T.
- Journal of Nuclear Materials, Vol. 371, Issue 1-3
Deformation behavior of laser welds in high temperature oxidation resistant Fe–Cr–Al alloys for fuel cladding applications
journal, November 2014
- Field, Kevin G.; Gussev, Maxim N.; Yamamoto, Yukinori
- Journal of Nuclear Materials, Vol. 454, Issue 1-3
On the delamination of FeCrAl ODS alloys
journal, July 2009
- Chao, J.; Capdevila-Montes, C.; González-Carrasco, J. L.
- Materials Science and Engineering: A, Vol. 515, Issue 1-2
Works referencing / citing this record:
A study of irradiation effects in TiO 2 using molecular dynamics simulation and complementary in situ transmission electron microscopy
journal, September 2018
- Cowen, Benjamin J.; El-Genk, Mohamed S.; Hattar, Khalid
- Journal of Applied Physics, Vol. 124, Issue 9
Local structure of Ni 80 X 20 (X: Cr, Mn, Pd) solid-solution alloys and its response to ion irradiation
journal, November 2019
- Zhang, F. X.; Tong, Y.; Velisa, G.
- Journal of Physics: Condensed Matter, Vol. 32, Issue 7
Oxidation behavior of RF magnetron sputtered Cr–SiC–Cr composites coating on zircaloy fuel cladding
journal, July 2019
- Li, Guangbin; Liu, Yanhong; Zhang, Yingchun
- Materials Research Express, Vol. 6, Issue 9
Uranium nitride-silicide advanced nuclear fuel: higher efficiency and greater safety
journal, October 2018
- Wilson, Tashiema L.; Moore, Emily E.; Adorno Lopes, Denise
- Advances in Applied Ceramics, Vol. 117, Issue sup1
Feasibility assessment of the alumina‐forming duplex stainless steels as accident tolerant fuel cladding materials for light water reactors
journal, December 2019
- Kim, Chaewon; Kim, Hyunmyung; Jang, Changheui
- International Journal of Energy Research, Vol. 44, Issue 10
Oxidation Characteristics of Two FeCrAl Alloys in Air and Steam from 800°C to 1300°C
journal, June 2018
- Rebak, Raul B.; Gupta, Vipul K.; Larsen, Michael
- JOM, Vol. 70, Issue 8
Reactive Element Effects in High-Temperature Alloys Disentangled
journal, November 2019
- Babic, Vedad; Geers, Christine; Panas, Itai
- Oxidation of Metals, Vol. 93, Issue 1-2
Theoretical and experimental analysis of selective oxidation of Fe–3Al–6Cr alloy with Zn vapor
journal, September 2019
- Yan, Jingyu; Wang, Jianhua; Wu, Changjun
- Materials Research Express, Vol. 6, Issue 11
The Preparation and Microstructure of Nanocrystal 3C-SiC/ZrO2 Bilayer Films
journal, November 2017
- Ye, Chao; Ran, Guang; Zhou, Wei
- Nanomaterials, Vol. 7, Issue 12