skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: A Sea Floor Survey of the Sleipner Field to Monitor CO2 Migration

Abstract

In the North Sea natural gas production field at Sleipner, CO{sub 2} is being separated from natural gas and injected into an underground saline aquifer, known as the Utsira formation, for environmental purposes. In this study, gravity measurements were made over the Sleipner CO{sub 2} injection site in 2002 and again in 2005 on top of 30 concrete benchmarks on the seafloor to study the behavior and physical properties of the injected CO{sub 2}. As the gas is injected, pore space water is replaced by gas, altering the bulk density of the formation. This results in a change in gravitational acceleration observed on the overlying sea floor. Our gravity measurements show a repeatability of 4.3 {micro}Gal for 2003 and 3.5 {micro}Gal for 2005. Forward models of the gravity change are calculated based on both 3-D seismic data and reservoir simulation models from other studies. These forward models indicate that the magnitude of maximum gravity change is primarily related to CO{sub 2} density rather than flow geometry. The time-lapse gravity observations best fit a high temperature forward model based on the seismically determined CO{sub 2} geometry, suggesting that the 3-D reflection seismics are imaging the geometry of the injected CO{sub 2},more » and that the in situ CO{sub 2} density is around 530 kg/m{sup 3}. Uncertainty in determining the average density using this technique is estimated to be {+-}65 kg/m{sup 3} (95% confidence), however, additional seismic surveys are needed before final conclusions can be drawn. Future gravity measurements will put better constraints on the CO{sub 2} density and continue to map out the CO{sub 2} flow.« less

Authors:
Publication Date:
Research Org.:
Univ. of California (United States)
Sponsoring Org.:
USDOE
OSTI Identifier:
902109
DOE Contract Number:  
FC26-02NT41587
Resource Type:
Technical Report
Country of Publication:
United States
Language:
English
Subject:
03 NATURAL GAS; ACCELERATION; BENCHMARKS; BULK DENSITY; CONCRETES; FLOORS; GEOMETRY; MONITORS; NATURAL GAS; NORTH SEA; PHYSICAL PROPERTIES; PRODUCTION; REFLECTION; SEAS; SEISMIC SURVEYS; SIMULATION; WATER

Citation Formats

Zumberge, Mark A. A Sea Floor Survey of the Sleipner Field to Monitor CO2 Migration. United States: N. p., 2005. Web. doi:10.2172/902109.
Zumberge, Mark A. A Sea Floor Survey of the Sleipner Field to Monitor CO2 Migration. United States. https://doi.org/10.2172/902109
Zumberge, Mark A. 2005. "A Sea Floor Survey of the Sleipner Field to Monitor CO2 Migration". United States. https://doi.org/10.2172/902109. https://www.osti.gov/servlets/purl/902109.
@article{osti_902109,
title = {A Sea Floor Survey of the Sleipner Field to Monitor CO2 Migration},
author = {Zumberge, Mark A},
abstractNote = {In the North Sea natural gas production field at Sleipner, CO{sub 2} is being separated from natural gas and injected into an underground saline aquifer, known as the Utsira formation, for environmental purposes. In this study, gravity measurements were made over the Sleipner CO{sub 2} injection site in 2002 and again in 2005 on top of 30 concrete benchmarks on the seafloor to study the behavior and physical properties of the injected CO{sub 2}. As the gas is injected, pore space water is replaced by gas, altering the bulk density of the formation. This results in a change in gravitational acceleration observed on the overlying sea floor. Our gravity measurements show a repeatability of 4.3 {micro}Gal for 2003 and 3.5 {micro}Gal for 2005. Forward models of the gravity change are calculated based on both 3-D seismic data and reservoir simulation models from other studies. These forward models indicate that the magnitude of maximum gravity change is primarily related to CO{sub 2} density rather than flow geometry. The time-lapse gravity observations best fit a high temperature forward model based on the seismically determined CO{sub 2} geometry, suggesting that the 3-D reflection seismics are imaging the geometry of the injected CO{sub 2}, and that the in situ CO{sub 2} density is around 530 kg/m{sup 3}. Uncertainty in determining the average density using this technique is estimated to be {+-}65 kg/m{sup 3} (95% confidence), however, additional seismic surveys are needed before final conclusions can be drawn. Future gravity measurements will put better constraints on the CO{sub 2} density and continue to map out the CO{sub 2} flow.},
doi = {10.2172/902109},
url = {https://www.osti.gov/biblio/902109}, journal = {},
number = ,
volume = ,
place = {United States},
year = {Sat Dec 31 00:00:00 EST 2005},
month = {Sat Dec 31 00:00:00 EST 2005}
}