Inductively Heated Shape Memory Polymer for the Magnetic Actuation of Medical Devices
Presently there is interest in making medical devices such as expandable stents and intravascular microactuators from shape memory polymer (SMP). One of the key challenges in realizing SMP medical devices is the implementation of a safe and effective method of thermally actuating various device geometries in vivo. A novel scheme of actuation by Curie-thermoregulated inductive heating is presented. Prototype medical devices made from SMP loaded with Nickel Zinc ferrite ferromagnetic particles were actuated in air by applying an alternating magnetic field to induce heating. Dynamic mechanical thermal analysis was performed on both the particle-loaded and neat SMP materials to assess the impact of the ferrite particles on the mechanical properties of the samples. Calorimetry was used to quantify the rate of heat generation as a function of particle size and volumetric loading of ferrite particles in the SMP. These tests demonstrated the feasibility of SMP actuation by inductive heating. Rapid and uniform heating was achieved in complex device geometries and particle loading up to 10% volume content did not interfere with the shape recovery of the SMP.
- Research Organization:
- Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 899398
- Report Number(s):
- UCRL-JRNL-215657; TRN: US200708%%270
- Journal Information:
- IEEE Transactions on Biomedical Engineering, vol. 53, no. 10, October 1, 2006, pp. 2075-2083, Journal Name: IEEE Transactions on Biomedical Engineering, vol. 53, no. 10, October 1, 2006, pp. 2075-2083
- Country of Publication:
- United States
- Language:
- English
Similar Records
Laser-Activated Shape Memory Polymer Microactuator for Thrombus Removal Following Ischemic Stroke: Preliminary In Vitro Analysis
A Processable Shape Memory Polymer System for Biomedical Applications