Seepage Calibration Model and Seepage Testing Data
The purpose of this Model Report is to document the Seepage Calibration Model (SCM). The SCM was developed (1) to establish the conceptual basis for the Seepage Model for Performance Assessment (SMPA), and (2) to derive seepage-relevant, model-related parameters and their distributions for use in the SMPA and seepage abstraction in support of the Total System Performance Assessment for License Application (TSPA-LA). This Model Report has been revised in response to a comprehensive, regulatory-focused evaluation performed by the Regulatory Integration Team [''Technical Work Plan for: Regulatory Integration Evaluation of Analysis and Model Reports Supporting the TSPA-LA'' (BSC 2004 [DIRS 169653])]. The SCM is intended to be used only within this Model Report for the estimation of seepage-relevant parameters through calibration of the model against seepage-rate data from liquid-release tests performed in several niches along the Exploratory Studies Facility (ESF) Main Drift and in the Cross-Drift. The SCM does not predict seepage into waste emplacement drifts under thermal or ambient conditions. Seepage predictions for waste emplacement drifts under ambient conditions will be performed with the SMPA [''Seepage Model for PA Including Drift Collapse'' (BSC 2004 [DIRS 167652])], which inherits the conceptual basis and model-related parameters from the SCM. Seepage during the thermal period is examined separately in the Thermal Hydrologic (TH) Seepage Model [see ''Drift-Scale Coupled Processes (DST and TH Seepage) Models'' (BSC 2004 [DIRS 170338])]. The scope of this work is (1) to evaluate seepage rates measured during liquid-release experiments performed in several niches in the Exploratory Studies Facility (ESF) and in the Cross-Drift, which was excavated for enhanced characterization of the repository block (ECRB); (2) to evaluate air-permeability data measured in boreholes above the niches and the Cross-Drift to obtain the permeability structure for the seepage model; (3) to use inverse modeling to calibrate the SCM and to estimate seepage-relevant, model-related parameters on the drift scale; (4) to estimate the epistemic uncertainty of the derived parameters, based on the goodness-of-fit to the observed data and the sensitivity of calculated seepage with respect to the parameters of interest; (5) to characterize the aleatory uncertainty of the parameters as a result of spatial variability; (6) to evaluate prediction uncertainty based on linear uncertainty-propagation analyses and Monte Carlo simulations; (7) to validate the SCM during model development, and validate the SCM using the post-development activities outlined in the Technical Work Plan (TWP); (8) to provide the technical basis for the resolution of unconfirmed issues previously labeled ''to be verified'' (TBV); and (9) to provide the technical basis for screening of certain seepage-related features, events, and processes (FEPs).
- Research Organization:
- Yucca Mountain Project, Las Vegas, NV (United States)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- AC28-01RW12101
- OSTI ID:
- 838645
- Report Number(s):
- MDL-NBS-HS-000004, REV 03; DOC.20040922.0003, DC41505; TRN: US0502832
- Resource Relation:
- Other Information: PBD: 2 Sep 2004
- Country of Publication:
- United States
- Language:
- English
Similar Records
SEEPAGE MODEL FOR PA INCLUDING DRIFT COLLAPSE
POST-PROCESSING ANALYSIS FOR THC SEEPAGE