241-AN-A valve pit manifold valves and position indication acceptance test procedure
This document describes the method used to test design criteria for gear actuated ball valves installed in 241-AN-A Valve Pit located at 200E Tank Farms. The purpose of this procedure is to demonstrate the following: Equipment is properly installed, labeled, and documented on As-Built drawings; New Manifold Valves in the 241-AN-A Valve Pit are fully operable using the handwheel of the valve operators; New valve position indicators on the valve operators will show correct valve positions; New valve position switches will function properly; and New valve locking devices function properly.
- Research Organization:
- MAINC (US)
- Sponsoring Organization:
- ENVIRONMENTAL MANAGEMENT (US)
- DOE Contract Number:
- AC06-96RL13200
- OSTI ID:
- 797715
- Report Number(s):
- HNF-4642, Rev.0; TRN: US0204916
- Resource Relation:
- Other Information: PBD: 25 Aug 1999
- Country of Publication:
- United States
- Language:
- English
Similar Records
241-AN-B valve pit manifold valves and position indication acceptance test procedure
Project W-314 acceptance test report HNF-4643 for HNF-4642 241-AN-A valve pit manifold valves and position indication for project W-314
241-AN-B pit leak detection ANA-WT-LDSTA-231 acceptance test procedure
Technical Report
·
Wed Aug 25 00:00:00 EDT 1999
·
OSTI ID:797715
Project W-314 acceptance test report HNF-4643 for HNF-4642 241-AN-A valve pit manifold valves and position indication for project W-314
Technical Report
·
Wed Sep 22 00:00:00 EDT 1999
·
OSTI ID:797715
241-AN-B pit leak detection ANA-WT-LDSTA-231 acceptance test procedure
Technical Report
·
Wed Aug 25 00:00:00 EDT 1999
·
OSTI ID:797715