SURFACE-MODIFIED COALS FOR ENHANCED CATALYST DISPERSION AND LIQUEFACTION
This is the final report of the Department of Energy Sponsored project DE-FGF22-95PC95229 entitled, surface modified coals for enhanced catalyst dispersion and liquefaction. The aims of the study were to enhance catalyst loading and dispersion in coal for improved liquefaction by preadsorption of surfactants and catalysts on the coal and to train and educate minority scientists in catalysts and separation science. Illinois No. 6 Coal (DEC-24) was selected for the study. The surfactants investigated included dodecyl dimethyl ethyl ammonium bromide (DDAB), a cationic surfactant, sodium dodecyl sulfate, an anionic surfactant, and Triton x-100, a neutral surfactant. Ammonium molybdate tetrahydrate was used as the molybdenum catalyst precursor. Zeta potential, BET, FTIR, AFM, UV-Vis and luminescence intensity measurements were undertaken to assess the surface properties and the liquefaction activities of the coal. The parent coal had a net negative surface charge over the pH range 2-12. However, in the presence of DDAB the negativity of the surface charge decreased. At higher concentrations of DDAB, a positive surface charge resulted. In contrast to the effect of DDAB, the zeta potential of the coal became more negative than the parent coal in the presence of SDS. Adsorption of Triton reduced the net negative charge density of the coal samples. The measured surface area of the coal surface was about 30 m{sup 2}/g compared to 77m{sup 2}/g after being washed with deionized water. Addition of the surfactants decreased the surface area of the samples. Adsorption of the molybdenum catalyst increased the surface area of the coal sample. The adsorption of molybdenum on the coal was significantly promoted by preadsorption of DDAB and SDS. Molybdenum adsorption showed that, over a wide range of concentrations and pH values, the DDAB treated coal adsorbed a higher amount of molybdenum than the samples treated with SDS. The infrared spectroscopy (FTIR) and the atomic force microscopy (AFM) also provided evidence that confirmed the adsorption of the surfactants onto the coal surface. The luminescence measurements showed that the coal and solid surfactants luminescence weakly. No statistically significant influence was observed that resulted from the action of the surfactants or surfactant-molybdenum catalyst. Interestingly, the liquefaction results produced data that indicated the use of surfactants did not significantly improve the liquefaction activity of the coal as had initially been hypothesized. The UV-adsorption tests provided evidence that suggest that this may have been due to oversaturation. Detailed discussions of the results and recommendations for future work are provided.
- Research Organization:
- Federal Energy Technology Center Morgantown (FETC-MGN), Morgantown, WV (United States); Federal Energy Technology Center Pittsburgh (FETC-PGH), Pittsburgh, PA (United States)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- FG22-95PC95229
- OSTI ID:
- 780801
- Report Number(s):
- DE-FG22-95PC95229-07; TRN: AH200121%%55
- Resource Relation:
- Other Information: PBD: 1 Sep 1999
- Country of Publication:
- United States
- Language:
- English
Similar Records
Surface modified coals for enhanced catalyst and liquefaction
Surface Modified Coals for Enhanced Catalyst Dispersion and Liquefaction