Role of beam absorption in plasma during laser welding
The relationship between beam focus position and penetration depth in CW laser welding was studied numerically and experimentally for different welding conditions. Calculations were performed using a transient hydrodynamic model that incorporates the effect of evaporation recoil pressure and the associated melt expulsion. The simulation results are compared with measurements made on a series of test welds obtained using a 1650 W CO{sub 2} laser. The simulations predict, and the experiments confirm, that maximum penetration occurs with a specific location of the beam focus, with respect to the original sample surface, and that this relationship depends on the processing conditions. In particular, beam absorption in the plasma has a significant effect on the relationship between penetration and focus position. When the process parameters result in strong beam absorption in the keyhole plasma, the maximum penetration will occur when the laser focus is at or above the sample surface. In a case of weak absorption however, the penetration depth reaches its maximum value when the beam focus is located below the sample surface. In all cases, the numerical results are in good agreement with the experimental measurements.
- Research Organization:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sandia National Lab. (SNL-CA), Livermore, CA (United States)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 755598
- Report Number(s):
- SAND2000-1209J; TRN: AH200021%%45
- Journal Information:
- J. Phys. D: Appl. Phys., Other Information: Submitted to J. Phys. D: Appl. Phys.; PBD: 15 May 2000
- Country of Publication:
- United States
- Language:
- English
Similar Records
An analysis of the laser material interaction in the welding of steel using a cw CO laser
A mathematical model of ablation in the keyhole and droplet formation in the plume in deep penetration laser welding