Determining equivalent damage loading for full-scale wind turbine blade fatigue tests
This paper describes a simplified method for converting wind turbine rotor design loads into equivalent-damage, constant-amplitude loads and load ratios for both flap and lead-lag directions. It is an iterative method that was developed at the National Renewable Energy Laboratory (NREL) using Palmgren-Miner's linear damage principles. The general method is unique because it does not presume that any information about the materials or blade structural properties is precisely known. According to this method, the loads are never converted to stresses. Instead, a family of M-N curves (moment vs. cycles) is defined with reasonable boundaries for load-amplitude and slope. An optimization program iterates and converges on the constant amplitude test load and load ratio that minimizes the sensitivity to the range of M-N curves for each blade section. The authors constrained the general method to match the NedWind 25 design condition for the Standards, Measurements, and Testing (SMT) blade testing pro gram. SMT participants agreed to use the fixed S-N slope of m = 10 from the original design to produce consistent test-loads among the laboratories. Unconstrained, the general method suggests that slightly higher test loads should be used for the NedWind 25 blade design spectrum. NedWind 25 blade test loads were computed for lead-lag and flap under single-axis and two-axis loading.
- Research Organization:
- National Renewable Energy Lab. (NREL), Golden, CO (United States)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- AC36-99GO10337
- OSTI ID:
- 753808
- Report Number(s):
- NREL/CP-500-27510; TRN: AH200011%%63
- Resource Relation:
- Conference: 19th American Society of Mechanical Engineers (ASME) Wind Energy Symposium, Reno, NV (US), 01/10/2000--01/13/2000; Other Information: PBD: 13 Mar 2000
- Country of Publication:
- United States
- Language:
- English
Similar Records
Implementation of a Biaxial Resonant Fatigue Test Method on a Large Wind Turbine Blade
Effect of Load Phase Angle on Wind Turbine Blade Fatigue Damage: Preprint