Investigation of load reduction for a variable speed, variable pitch, and variable coning wind turbine
- Univ. of Utah, Salt Lake City, UT (United States)
A two bladed, variable speed and variable pitch wind turbine was modeled using ADAMS{reg_sign} to evaluate load reduction abilities of a variable coning configuration as compared to a teetered rotor, and also to evaluate control methods. The basic dynamic behavior of the variable coning turbine was investigated and compared to the teetered rotor under constant wind conditions as well as turbulent wind conditions. Results indicate the variable coning rotor has larger flap oscillation amplitudes and much lower root flap bending moments than the teetered rotor. Three methods of control were evaluated for turbulent wind simulations. These were a standard IPD control method, a generalized predictive control method, and a bias estimate control method. Each control method was evaluated for both the variable coning configuration and the teetered configuration. The ability of the different control methods to maintain the rotor speed near the desired set point is evaluated from the RMS error of rotor speed. The activity of the control system is evaluated from cycles per second of the blade pitch angle. All three of the methods were found to produce similar results for the variable coning rotor and the teetered rotor, as well as similar results to each other.
- Research Organization:
- American Wind Energy Association, Washington, DC (United States)
- OSTI ID:
- 570066
- Report Number(s):
- CONF-970608-PROC.; ON: DE98001975; TRN: 98:001071-0038
- Resource Relation:
- Conference: WindPower `97: annual conference and exhibition of the American Wind Energy Association (AWEA), Austin, TX (United States), 15-18 Jun 1997; Other Information: PBD: [1997]; Related Information: Is Part Of Proceedings: American Wind Energy Association; PB: 636 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Advanced Offshore Wind Turbine/Foundation Concept for the Great Lakes
On the design of horizontal axis two-bladed hinged wind turbines