skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Measuring depth profiles of residual stress with Raman spectroscopy

Abstract

Knowledge of the variation of residual stress is a very important factor in understanding the properties of machined surfaces. The nature of the residual stress can determine a part`s susceptibility to wear deformation, and cracking. Raman spectroscopy is known to be a very useful technique for measuring residual stress in many materials. These measurements are routinely made with a lateral resolution of 1{mu}m and an accuracy of 0.1 kbar. The variation of stress with depth; however, has not received much attention in the past. A novel technique has been developed that allows quantitative measurement of the variation of the residual stress with depth with an accuracy of 10nm in the z direction. Qualitative techniques for determining whether the stress is varying with depth are presented. It is also demonstrated that when the stress is changing over the volume sampled, errors can be introduced if the variation of the stress with depth is ignored. Computer aided data analysis is used to determine the depth dependence of the residual stress.

Authors:
; ;
Publication Date:
Research Org.:
Los Alamos National Lab. (LANL), Los Alamos, NM (United States); North Carolina State Univ., Raleigh, NC (United States)
OSTI Identifier:
476628
Report Number(s):
LA-SUB-93-81
ON: DE97003578; TRN: 97:002288-0004
Resource Type:
Technical Report
Resource Relation:
Other Information: PBD: Dec 1988; Related Information: Is Part Of Precision Engineering Center. 1988 Annual report, Volume VI; Dow, T. [ed.]; Fornaro, R.; Keltie, R.; Paesler, M. [and others]; PB: 367 p.
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; RESIDUAL STRESSES; MEASURING METHODS; SURFACE PROPERTIES; WEAR; RAMAN SPECTROSCOPY; RAMAN SPECTRA; DATA ANALYSIS; COMPUTER CALCULATIONS; DEPTH

Citation Formats

Enloe, W. S., Sparks, R. G., and Paesler, M. A. Measuring depth profiles of residual stress with Raman spectroscopy. United States: N. p., 1988. Web. doi:10.2172/476628.
Enloe, W. S., Sparks, R. G., & Paesler, M. A. Measuring depth profiles of residual stress with Raman spectroscopy. United States. https://doi.org/10.2172/476628
Enloe, W. S., Sparks, R. G., and Paesler, M. A. 1988. "Measuring depth profiles of residual stress with Raman spectroscopy". United States. https://doi.org/10.2172/476628. https://www.osti.gov/servlets/purl/476628.
@article{osti_476628,
title = {Measuring depth profiles of residual stress with Raman spectroscopy},
author = {Enloe, W. S. and Sparks, R. G. and Paesler, M. A.},
abstractNote = {Knowledge of the variation of residual stress is a very important factor in understanding the properties of machined surfaces. The nature of the residual stress can determine a part`s susceptibility to wear deformation, and cracking. Raman spectroscopy is known to be a very useful technique for measuring residual stress in many materials. These measurements are routinely made with a lateral resolution of 1{mu}m and an accuracy of 0.1 kbar. The variation of stress with depth; however, has not received much attention in the past. A novel technique has been developed that allows quantitative measurement of the variation of the residual stress with depth with an accuracy of 10nm in the z direction. Qualitative techniques for determining whether the stress is varying with depth are presented. It is also demonstrated that when the stress is changing over the volume sampled, errors can be introduced if the variation of the stress with depth is ignored. Computer aided data analysis is used to determine the depth dependence of the residual stress.},
doi = {10.2172/476628},
url = {https://www.osti.gov/biblio/476628}, journal = {},
number = ,
volume = ,
place = {United States},
year = {Thu Dec 01 00:00:00 EST 1988},
month = {Thu Dec 01 00:00:00 EST 1988}
}