Novel carbon-ion fuel cells. Final report, October 1, 1993--September 30, 1996
Mixed lanthanide dicarbides having the fluorite crystal structure have been synthesized using the elemental lanthanide metals and elemental carbon that was 99.9% pure carbon-13 isotope. A two step process of first, arc furnace melting of the components, followed by an annealing step in a high vacuum furnace, was adopted as the standard method of fabricating small cast ingots of the dicarbides. The crystal structure of the various lanthanide dicarbides produced were confirmed by x-ray diffraction under protective atmospheres at both room temperature at Duke University and at high temperature at Oak Ridge National Laboratory. After more than 15 combinations of cerium or lanthanum with dopants were tried, low temperature x-ray diffraction showed that Ce{sub .5}Er{sub .5}C{sub 2} had been successfully stabilized and had the desired fluorite crystal structure at room temperature. The fluorite crystal structure lanthanide dicarbide cast ingots were further prepared by having flat and clean surfaces ground onto their surfaces by high-speed milling machines inside argon gas atmosphere gloveboxes. The surfaces thus created were then coated with carbon-12 by the arc evaporation method under low pressure argon gas. The coated ingots were then allowed to have carbon diffusion occur from the surface coating of carbon-12 into the ingot of dicarbide that had been synthesized from carbon-13. After the diffusion run, the cast ingots were slit down the axis perpendicular to the carbon coating. The fracture surface created was then squared and polished by high,speed milling in a glove box with a argon atmosphere. The high diffusion co-efficient of carbon in lanthanide dicarbides having the fluorite crystal structure would make possible the manufacture of a carbon-ion electrolyte for use in a battery or a fuel cell that could consume solid carbon as it`s feedstock.
- Research Organization:
- Duke Univ., Durham, NC (United States). Dept. of Mechanical Engineering and Materials Science
- Sponsoring Organization:
- USDOE Assistant Secretary for Fossil Energy, Washington, DC (United States)
- DOE Contract Number:
- FG22-93PC93219
- OSTI ID:
- 475616
- Report Number(s):
- DOE/PC/93219-T13; ON: DE97052310; TRN: 97:003253
- Resource Relation:
- Other Information: PBD: Jan 1997
- Country of Publication:
- United States
- Language:
- English
Similar Records
Synthesize and microstructure characterization of Ni{sub 43}Mn{sub 41}Co{sub 5}Sn{sub 11} Heusler alloy
METALLURGICAL PROGRESS REPORT NUMBER 14 FOR THE PERIOD OF JANUARY 1, 1962 TO MARCH 31, 1962
Related Subjects
30 DIRECT ENERGY CONVERSION
CERIUM CARBIDES
IONIC CONDUCTIVITY
ERBIUM CARBIDES
FUEL CELLS
DESIGN
PROGRESS REPORT
CARBON 12
CARBON 13
CARBON IONS
CRYSTAL STRUCTURE
DIFFUSION
FLUORITE
MASS SPECTROSCOPY
SURFACE COATING
X-RAY DIFFRACTION
FABRICATION
SOLID ELECTROLYTES
THERMODYNAMICS