Butyl rubber O-ring seals: Revision of test procedures for stockpile materials
Extensive testing showed little correlation between test slab and O-ring performance. New procedures, comparable to those used with the traditional test slabs, were defined for hardness, compression set, and tensile property testing on sacrificial O-ring specimens. Changes in target performance values were made as needed and were, in one case, tightened to reflect the O-ring performance data. An additional study was carried out on O-ring and slab performance vs cure cycle and showed little sensitivity of material performance to large changes in curing time. Aging and spectra of certain materials indicated that two sets of test slabs from current vendor were accidently made from EPDM rather than butyl rubber. Random testing found no O-rings made from EPDM. As a result, and additional spectroscope test will be added to the product acceptance procedures to verify the type of rubber compound used.
- Research Organization:
- Sandia National Lab. (SNL-CA), Livermore, CA (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 455540
- Report Number(s):
- SAND-97-8210; ON: DE97051305
- Resource Relation:
- Other Information: PBD: Dec 1996
- Country of Publication:
- United States
- Language:
- English
Similar Records
Effects of simulant mixed waste on EPDM and butyl rubber
Aging of Weapon Seals – An Update on Butyl O-ring Issues