Enhancement of substructure strengthening of martensite

Cheng, I. -lin

doi:10.2172/4081697

Title: Enhancement of substructure strengthening of martensite

Full Record
Other Related Research

Abstract

The structure and mechanical properties of two types of precipitation hardenable austenite alloys are studied.

Authors:

Cheng, I. -lin ^[1]

Univ. of California, Berkeley, CA (United States)

Publication Date:: Thu Jan 01 00:00:00 EST 1970

Research Org.:: Univ. of California, Berkeley, CA (United States)

Sponsoring Org.:: US Atomic Energy Commission (AEC)

OSTI Identifier:: 4081697

Report Number(s):: UCRL-19196

NSA Number:: NSA-24-044703

DOE Contract Number:: W-7405-ENG-48

Resource Type:: Thesis/Dissertation

Resource Relation:: Other Information: Thesis. UNCL. Orig. Receipt Date: 31-DEC-70

Country of Publication:: United States

Language:: English

Subject:: 36 MATERIALS SCIENCE; IRON ALLOYS; IRON BASE ALLOY; MARTENSITE; MECHANICAL PROPERTIES; METALLOGRAPHY; MICROSTRUCTURE; NICKEL ALLOYS; PHASE DIAGRAMS; PHASE TRANSFORMATION; PRECIPITATION CARBIDES- MOLYBDENUM ALLOYS; TITANIUM ALLOYS; MOLYBDENUM ALLOYS AND SYSTEMS/Fe-base-Mo-Ni, microstructure of martensite-transformed carbon-containing, effects of precipitates on; TITANIUM ALLOYS AND SYSTEMS/Fe-base-Ni-Ti, microstructure of martensite-transformed, effects of precipitates on; MOLYBDENUM ALLOYS AND SYSTEMS/ Fe-base-Mo-Ni, mechanical properties of martensite-transformed carbon- containing, effects of precipitates on; NICKEL ALLOYS AND SYSTEMS/Fe-base-Mo- Ni, mechanical properties of martensite-transformed carbon-containing, effects of precipitates on; TITANIUM ALLOYS AND SYSTEMS/Fe-base-Ni-Ti, mechanical properties of martensite-transformed, effects of precipitates on; NICKEL ALLOYS AND SYSTEMS/Fe-base-Ni-Ti, mechanical properties of martensite-transformed, effects of precipitates on; IRON ALLOYS AND SYSTEMS/Fe-base-Ni-Ti, mechanical properties of martensite-transformed, effects of precipitates on; IRON ALLOYS AND SYSTEMS/Fe-base-Mo-Ni, mechanical properties of martensite-transformed carbon- containing

Citation Formats


                    Cheng, I. -lin. Enhancement of substructure strengthening of martensite.  United States: N. p., 1970. 
        Web.  doi:10.2172/4081697.

Copy to clipboard


                    Cheng, I. -lin. Enhancement of substructure strengthening of martensite.  United States.  https://doi.org/10.2172/4081697

Copy to clipboard


                    Cheng, I. -lin. 1970.  
        "Enhancement of substructure strengthening of martensite".  United States.  https://doi.org/10.2172/4081697.  https://www.osti.gov/servlets/purl/4081697.

Copy to clipboard


                    
@article{osti_4081697,

  title        = {Enhancement of substructure strengthening of martensite},

  author       = {Cheng, I. -lin},

  abstractNote = {The structure and mechanical properties of two types of precipitation hardenable austenite alloys are studied.},

  doi          = {10.2172/4081697},

  url          = {https://www.osti.gov/biblio/4081697},
  journal      = {},
number       = ,

  volume       = ,

  place        = {United States},

  year         = {Thu Jan 01 00:00:00 EST 1970},

  month        = {Thu Jan 01 00:00:00 EST 1970}

}

Copy to clipboard

Thesis/Dissertation:

View Thesis/Dissertation (1.60 MB)

https://doi.org/10.2172/4081697

Other availability

Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this thesis or dissertation.

Save / Share:

Export Metadata

Save to My Library

Similar records in OSTI.GOV collections:

Structure and elevated temperature properties of ferritic alloys strengthened by intermetallic compounds

Thesis/Dissertation Bhandarkar, Mangalore

An investigation was conducted to develop high-temperature 1Ta-- 6Cr, 1Ta--7Cr, and 1Ta-7Cr--0.5 Mo alloys using a dispersion of the Laves phase in a noncarbon-containing, body-centeredcubic iron matrix. An understanding and application of basic principles of materials science and the use of large amounts of information available in the literature were instrumental in the development of Fe-- Ta-- Cr alloys of the investigation. The phase transformations that occurred in the alloys, and the resulting microstructures were studied. The relations between mechanical properties and structure were also examined. Short- time tensile mechanical properties and long-time creep and stress-rupture tests were conducted onmore »« less
https://doi.org/10.2172/4405218

Full Text Available
Isothermal study of bainitic and martensitic transformations in some low alloy steels using a new magnetic permeability technique

Thesis/Dissertation Ericsson, C

The upper and lower bainitic harderabilities were established for the commercial low alloy heat treatable steels AISI 4130, AISl 4140, D6AC and AMS 6416 (300-M). The kinetics of the bainitic reaction below the mantensite start temperature (M/sub s/) were studied and the martensite range temperatures were determined. The materials AISI 4130 and 300-M were austenitized at both 880 deg C and 1200 deg C and the effect of the austenitizing temperature on the upper bainitic hardenability was determined. A magnetic permeability technique was employed in this investigation to monitor the austenite transformations. Computational methods were developed to decode, analyze, andmore »« less
The Microstructure-Processing-Property Relationships in an Al Matrix Composite System Reinforced by Al-Cu-Fe Alloy Particles

Thesis/Dissertation Tang, Fei

Metal matrix composites (MMC), especially Al matrix composites, received a lot of attention during many years of research because of their promise for the development of automotive and aerospace materials with improved properties and performance, such as lighter weight and better structural properties, improved thermal conductivity and wear resistance. In order to make the MMC materials more viable in various applications, current research efforts on the MMCs should continue to focus on two important aspects, including improving the properties of MMCs and finding more economical techniques to produce MMCs. Solid state vacuum sintering was studied in tap densified Al powdermore »« less
https://doi.org/10.2172/835313

Full Text Available
Increased strengthening of austenitic alloys through dual aging

Technical Report Ma, A

A study of the effect of solution treatment, single and duplex isothermal aging heat treatments on an Fe-Ni-Ti-Al austenitic alloy hardened by ..gamma..' precipitation is reported. Sequential heat treatments were performed and studied in order to develop a systematic process for achieving very high strength austenite through thermal processing alone. Room temperature tensile tests were carried out. Alloys receiving double aging treatments were found to achieve mechanical properties superior to those aged at a given temperature. An optimum level of yield strength (172 Ksi) along with good elongation (20%) was obtained from a two-step aging process. Structural examination indicated thatmore »« less
https://doi.org/10.2172/6550508

Full Text Available
Interrelationships between thermal history and mechanical properties of a secondary hardening steel

Thesis/Dissertation Kar, Nareshchandra

Commercial secondary hardening steel, VASCO MA, has been subjected to modified heat treatments to introduce mixed microstructures of martensite and lower bainite. Dilatometry, tensile testing, hardness measurements and slow-bend testing have been carried out and the mechanical properties obtained have been correlated to microstructure using scanning electron microscopy and metallography. Duplex microstructures containing small amounts of lower bainite are found to show an increased toughness (at similar strength levels) on tempering in the secondary hardening range, as compared to initially fully martensitic microstructures. As the percentage of lower bainite in the duplex microstructures is increased, the secondary hardening peak ismore »« less
https://doi.org/10.2172/7228060

Full Text Available

Similar Records