Description
|
Polar-direct-drive exploding pushers are used as a high-yield, low-areal-density fusion product source at the National Ignition Facility with applications including diagnostic calibration, nuclear security, backlighting, electron-ion equilibration and nucleosynthesis-relevant experiments. In this paper, two different paths to improving the performance of this platform are explored: (i) optimizing the laser drive, and (ii) optimizing the target. While the present study is specifically geared towards nucleosynthesis experiments, the results are generally applicable. Example data from T[sub 2]/[sup 3]He-gas-filled implosions with trace deuterium are used to show that yield and ion temperature (T[sub ion]) from 1.6mm-outer-diameter thin-glass-shell capsule implosions are improved at a set laser energy by switching from a ramped to a square laser pulse shape, and that increased laser energy further improves yield and Tion, although by factors lower than predicted by 1D simulations. Using data from D[sub 2]/[sup 3]He-gas-filled implosions, yield at a set T[sub ion] is experimentally verified to increase with capsule size. Uniform D[sup 3]He-proton spectra from 3mm-outer-diameter CH shell implosions demonstrate the utility of this platform for studying charged-particle-producing reactions relevant to stellar nucleosynthesis.
|
Notes
| PSFC REPORT PSFC/JA-17-48
This material is based upon work supported by the Department of Energy, National Nuclear Security Administration under Award Numbers DE-NA0001857, DE-NA0002949, DE-NA0002905, DE-FG02-88ER40387, DE-NA-0001808. This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. |