Complexity analysis of serrated flows in a bulk metallic glass under constrained and unconstrained conditions

Brechtl, Jamieson; Xie, Xie; Wang, Zhong; Qiao, Junwei; Liaw, Peter K.

doi:10.1016/j.msea.2019.138585

Title: Complexity analysis of serrated flows in a bulk metallic glass under constrained and unconstrained conditions

Journal Article · Mon Jan 13 00:00:00 EST 2020 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

DOI:https://doi.org/10.1016/j.msea.2019.138585· OSTI ID:1761733

Brechtl, Jamieson ^[1]; Xie, Xie ^[1]; Wang, Zhong ^[2]; Qiao, Junwei ^[2]; Liaw, Peter K. ^[1]

Univ. of Tennessee, Knoxville, TN (United States)
Univ. of Tennessee, Knoxville, TN (United States); Taiyuan Univ. of Technology (China)

For the present work, the Zr55Cu30Ni5Al10 (atomic percent) bulk metallic glass underwent room-temperature compression experiments in both the constrained and unconstrained conditions. For the constrained condition, samples were exposed to strain rates ranging from 2 × 10^-5 s^-1 to 2 × 10^-3 s^-1, while for the unconstrained case, the rates varied between 5 × 10^-5s^-1 and 2 × 10^-3 s^-1. The serrated flow was modeled and analyzed using the refined composite multiscale entropy algorithm. Findings indicate that the complexity of the serration behavior increased with respect to the strain rate for both conditions. The increase in the complexity with increasing the strain rate is thought to be linked to a rise in the number of defect interactions that occur in the alloy during plastic deformation. Results also indicate that for a strain rate of 2 × 10^-3 s^-1, the complexity of the serrated flow was the highest in the constrained condition, which corresponds to higher spatiotemporal correlations between slipping weak spots during a serration event. The microscopy results combined with the complexity analysis support the idea that the serration events, which correspond to defect interactions, are more spatially correlated in the constrained condition.

View Accepted Manuscript (DOE)

View Accepted Manuscript (Publisher)

Cite

Export

Save

Research Organization:: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

Sponsoring Organization:: USDOE

Grant/Contract Number:: AC05-00OR22725

OSTI ID:: 1761733

Alternate ID(s):: OSTI ID: 1778444

Journal Information:: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing, Vol. 771, Issue 1; ISSN 0921-5093

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (50)

Temperature effects on the serrated behavior of an Al0.5CoCrCuFeNi high-entropy alloy Chen, Shuying; Xie, Xie; Li, Weidong Materials Chemistry and Physics, Vol. 210 https://doi.org/10.1016/j.matchemphys.2017.09.004	journal	May 2018
Multiscale entropy analysis of biological signals Costa, Madalena; Goldberger, Ary L.; Peng, C. -K. Physical Review E, Vol. 71, Issue 2 https://doi.org/10.1103/PhysRevE.71.021906	journal	February 2005
Nanoscale serration and creep characteristics of Al0.5CoCrCuFeNi high-entropy alloys Chen, Shuying; Li, Weidong; Xie, Xie Journal of Alloys and Compounds, Vol. 752 https://doi.org/10.1016/j.jallcom.2018.04.137	journal	July 2018
Origin of serrated flow in bulk metallic glasses Xie, Xie; Lo, Yu-Chieh; Tong, Yang Journal of the Mechanics and Physics of Solids, Vol. 124 https://doi.org/10.1016/j.jmps.2018.11.015	journal	March 2019
Structural heterogeneity induced plasticity in bulk metallic glasses: From well-relaxed fragile glass to metal-like behavior Li, Weidong; Bei, H.; Tong, Y. Applied Physics Letters, Vol. 103, Issue 17 https://doi.org/10.1063/1.4827299	journal	October 2013
Microstructures and properties of high-entropy alloys Zhang, Yong; Zuo, Ting Ting; Tang, Zhi Progress in Materials Science, Vol. 61 https://doi.org/10.1016/j.pmatsci.2013.10.001	journal	April 2014
Serrated flow kinetics in a Zr-based bulk metallic glass Qiao, J. W.; Zhang, Y.; Liaw, P. K. Intermetallics, Vol. 18, Issue 11 https://doi.org/10.1016/j.intermet.2010.06.013	journal	November 2010
Mechanical failure and glass transition in metallic glasses Egami, T. Journal of Alloys and Compounds, Vol. 509 https://doi.org/10.1016/j.jallcom.2010.11.007	journal	June 2011
Effect of equal channel angular pressing on the Portevin–Le Chatelier effect in an Al3Mg alloy Lebedkina, T. A.; Lebyodkin, M. A.; Lamark, T. T. Materials Science and Engineering: A, Vol. 615 https://doi.org/10.1016/j.msea.2014.07.064	journal	October 2014
Tuned Critical Avalanche Scaling in Bulk Metallic Glasses Antonaglia, James; Xie, Xie; Schwarz, Gregory Scientific Reports, Vol. 4, Issue 1 https://doi.org/10.1038/srep04382	journal	March 2014
Mechanical behavior of amorphous alloys Schuh, C.; Hufnagel, T.; Ramamurty, U. Acta Materialia, Vol. 55, Issue 12 https://doi.org/10.1016/j.actamat.2007.01.052	journal	July 2007
Mechanical Behavior of Metallic Glasses: Microscopic Understanding of Strength and Ductility Chen, Mingwei Annual Review of Materials Research, Vol. 38, Issue 1 https://doi.org/10.1146/annurev.matsci.38.060407.130226	journal	August 2008
Comparative study of the Portevin-Le Chatelier effect in interstitial and substitutional alloy Sarkar, A.; Chatterjee, A.; Barat, P. Materials Science and Engineering: A, Vol. 459, Issue 1-2 https://doi.org/10.1016/j.msea.2007.01.006	journal	June 2007
Serration and noise behaviors in materials Zhang, Yong; Liu, Jun Peng; Chen, Shu Ying Progress in Materials Science, Vol. 90 https://doi.org/10.1016/j.pmatsci.2017.06.004	journal	October 2017
Complexity modeling and analysis of chaos and other fluctuating phenomena Brechtl, Jamieson; Xie, Xie; Liaw, Peter K. Chaos, Solitons & Fractals, Vol. 116 https://doi.org/10.1016/j.chaos.2018.09.005	journal	November 2018
Low-temperature shear banding for a Cu-based bulk-metallic glass Qiao, J. W.; Jia, H. L.; Chuang, C. P. Scripta Materialia, Vol. 63, Issue 8 https://doi.org/10.1016/j.scriptamat.2010.06.039	journal	October 2010
Rate dependence of shear banding and serrated flows in a bulk metallic glass Jiang, W. H.; Fan, G. J.; Liu, F. X. Journal of Materials Research, Vol. 21, Issue 09 https://doi.org/10.1557/jmr.2006.0266	journal	September 2006
Relationship between relaxation mechanisms and strain aging in an austenitic FeMnC steel Allain, S.; Bouaziz, O.; Lebedkina, T. Scripta Materialia, Vol. 64, Issue 8 https://doi.org/10.1016/j.scriptamat.2010.12.039	journal	April 2011
Entropy modeling on serrated flows in carburized steels Brechtl, Jamieson; Chen, Bilin; Xie, Xie Materials Science and Engineering: A, Vol. 753 https://doi.org/10.1016/j.msea.2019.02.096	journal	April 2019
On the strain rate dependence of the critical strain for plastic instabilities in Al-Mg alloys Chibane, N.; Ait-Amokhtar, H.; Fressengeas, C. Scripta Materialia, Vol. 130 https://doi.org/10.1016/j.scriptamat.2016.11.037	journal	March 2017
Analysis of complex time series using refined composite multiscale entropy Wu, Shuen-De; Wu, Chiu-Wen; Lin, Shiou-Gwo Physics Letters A, Vol. 378, Issue 20 https://doi.org/10.1016/j.physleta.2014.03.034	journal	April 2014
On the similarity of plastic flow processes during smooth and jerky flow in dilute alloys Lebyodkin, M. A.; Kobelev, N. P.; Bougherira, Y. Acta Materialia, Vol. 60, Issue 3 https://doi.org/10.1016/j.actamat.2011.10.042	journal	February 2012
Character of the deformation bands in the (A+B) regime of the Portevin-Le Chatelier effect in Al–2.5%Mg alloy Chatterjee, A.; Sarkar, A.; Barat, P. Materials Science and Engineering: A, Vol. 508, Issue 1-2 https://doi.org/10.1016/j.msea.2008.12.030	journal	May 2009
Compression-compression fatigue of Pd43Ni10Cu27P20 metallic glass foam Wang, Gongyao; Demetriou, Marios D.; Schramm, Joseph P. Journal of Applied Physics, Vol. 108, Issue 2 https://doi.org/10.1063/1.3457221	journal	July 2010
Investigation of the thermal and neutron irradiation response of BAM-11 bulk metallic glass Brechtl, J.; Wang, H.; Kumar, N. A. P. K. Journal of Nuclear Materials, Vol. 526 https://doi.org/10.1016/j.jnucmat.2019.151771	journal	December 2019
Ultrasonic assisted micro-shear punching of amorphous alloy Luo, Feng; Sun, Fei; Li, Kangsen Materials Research Letters, Vol. 6, Issue 10 https://doi.org/10.1080/21663831.2018.1500399	journal	July 2018
Effect of microstructure on continuous propagation of the Portevin–Le Chatelier deformation bands Yuzbekova, D.; Mogucheva, A.; Zhemchuzhnikova, D. International Journal of Plasticity, Vol. 96 https://doi.org/10.1016/j.ijplas.2017.05.004	journal	September 2017
Microstructures and Crackling Noise of AlxNbTiMoV High Entropy Alloys Chen, Shu; Yang, Xiao; Dahmen, Karin Entropy, Vol. 16, Issue 2 https://doi.org/10.3390/e16020870	journal	February 2014
Temperature dependence of serrated flows in compression in a bulk-metallic glass Jiang, W. H.; Jiang, F.; Liu, F. X. Applied Physics Letters, Vol. 89, Issue 26 https://doi.org/10.1063/1.2424275	journal	December 2006
Evolution of the microstructural and mechanical properties of BAM-11 bulk metallic glass during ion irradiation and annealing Brechtl, J.; Agarwal, S.; Crespillo, M. L. Journal of Nuclear Materials, Vol. 523 https://doi.org/10.1016/j.jnucmat.2019.06.010	journal	September 2019
Investigation of Portevin−Le Chatelier effect in HT-9 steel Sarkar, Apu; Maloy, Sturat A.; Murty, Korukonda L. Materials Science and Engineering: A, Vol. 631 https://doi.org/10.1016/j.msea.2015.02.022	journal	April 2015
Statistical analysis on strain-rate effects during serrations in a Zr-based bulk metallic glass Yuan, Bo; Li, Jiao-jiao; Qiao, Jun-wei Journal of Iron and Steel Research International, Vol. 24, Issue 4 https://doi.org/10.1016/S1006-706X(17)30069-9	journal	April 2017
The characteristics of serration in Al0.5CoCrFeNi high entropy alloy Niu, Sizhe; Kou, Hongchao; Zhang, Yu Materials Science and Engineering: A, Vol. 702 https://doi.org/10.1016/j.msea.2017.05.075	journal	August 2017
Local Atomic Structure of Amorphous Metals Egami, T.; Maed, K.; Srolovitz, D. Le Journal de Physique Colloques, Vol. 41, Issue C8 https://doi.org/10.1051/jphyscol:1980869	journal	August 1980
Multifractal Burst in the Spatiotemporal Dynamics of Jerky Flow Bharathi, M. S.; Lebyodkin, M.; Ananthakrishna, G. Physical Review Letters, Vol. 87, Issue 16 https://doi.org/10.1103/PhysRevLett.87.165508	journal	October 2001
Novel W-based metallic glass with high hardness and wear resistance Madge, S. V.; Caron, A.; Gralla, R. Intermetallics, Vol. 47 https://doi.org/10.1016/j.intermet.2013.12.003	journal	April 2014
Analysis of serrations and shear bands fractality in UFGs Iliopoulos, Aggelos C.; Nikolaidis, Nikolaos S.; Aifantis, Elias C. Journal of the Mechanical Behavior of Materials, Vol. 24, Issue 1-2 https://doi.org/10.1515/jmbm-2015-0001	journal	May 2015
Multiscale Entropy Analysis of Complex Physiologic Time Series Costa, Madalena; Goldberger, Ary L.; Peng, C. -K. Physical Review Letters, Vol. 89, Issue 6 https://doi.org/10.1103/PhysRevLett.89.068102	journal	July 2002
Shear bands in metallic glasses Greer, A. L.; Cheng, Y. Q.; Ma, E. Materials Science and Engineering: R: Reports, Vol. 74, Issue 4 https://doi.org/10.1016/j.mser.2013.04.001	journal	April 2013
Localized corrosion behavior of a zirconium-based bulk metallic glass relative to its crystalline state Peter, W. H.; Buchanan, R. A.; Liu, C. T. Intermetallics, Vol. 10, Issue 11-12 https://doi.org/10.1016/S0966-9795(02)00130-9	journal	November 2002
Multiscale entropy analysis of human gait dynamics Costa, M.; Peng, C. -K.; L. Goldberger, Ary Physica A: Statistical Mechanics and its Applications, Vol. 330, Issue 1-2 https://doi.org/10.1016/j.physa.2003.08.022	journal	December 2003
Computer simulation of deformation in two-dimensional amorphous structures Maeda, K.; Takeuchi, S. Physica Status Solidi (a), Vol. 49, Issue 2 https://doi.org/10.1002/pssa.2210490233	journal	October 1978
Progress in studying the fatigue behavior of Zr-based bulk-metallic glasses and their composites Wang, G. Y.; Liaw, P. K.; Morrison, M. L. Intermetallics, Vol. 17, Issue 8 https://doi.org/10.1016/j.intermet.2009.01.017	journal	August 2009
MULTISCALE ENTROPY ANALYSIS OF THE PORTEVIN-LE CHATELIER EFFECT IN AN Al-2.5%Mg ALLOY Sarkar, A.; Barat, P.; Mukherjee, P. Fractals, Vol. 18, Issue 03 https://doi.org/10.1142/S0218348X10004944	journal	September 2010
A microscopic mechanism for steady state inhomogeneous flow in metallic glasses Spaepen, Frans Acta Metallurgica, Vol. 25, Issue 4 https://doi.org/10.1016/0001-6160(77)90232-2	journal	April 1977
Temperature-Induced Short-Range Order Changes in Co ₆₇ B ₃₃ Glassy Thin Films and Elastic Limit Implications Schnabel, Volker; Bednarcik, Jozef; Music, Denis Materials Research Letters, Vol. 3, Issue 2 https://doi.org/10.1080/21663831.2014.963207	journal	September 2014
Plastic deformation in metallic glasses Argon, A. S. Acta Metallurgica, Vol. 27, Issue 1 https://doi.org/10.1016/0001-6160(79)90055-5	journal	January 1979
Influence of Strain Rate on Compressive Deformation Behavior of a Zr-Cu-Ni-Al Bulk Metallic Glass at Room Temperature Zheng, W.; Huang, Y. J.; Wang, G. Y. Metallurgical and Materials Transactions A, Vol. 42, Issue 6 https://doi.org/10.1007/s11661-011-0632-0	journal	February 2011
Wear resistance of amorphous alloys and related materials Greer, A. L.; Rutherford, K. L.; Hutchings, I. M. International Materials Reviews, Vol. 47, Issue 2 https://doi.org/10.1179/095066001225001067	journal	April 2002
Towards a greater understanding of serrated flows in an Al-containing high-entropy-based alloy Brechtl, J.; Chen, S. Y.; Xie, X. International Journal of Plasticity, Vol. 115 https://doi.org/10.1016/j.ijplas.2018.11.011	journal	April 2019

Similar Records

Relation Between the Defect Interactions and the Serration Dynamics in a Zr-Based Bulk Metallic Glass

Journal Article · Thu Jun 04 00:00:00 EDT 2020 · Applied Sciences · OSTI ID:1761733

Brechtl, Jamieson; Wang, Zhong; Xie, Xie; +2 more

Entropy modeling on serrated flows in carburized steels

Journal Article · Mon Mar 04 00:00:00 EST 2019 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:1761733

Brechtl, Jamieson; Chen, Bilin; Xie, Xie; +4 more

A critical dislocation velocity for serration mechanism transition in a nickel-chromium solid solution alloy

Journal Article · Wed Jul 14 00:00:00 EDT 2021 · International Journal of Plasticity · OSTI ID:1761733

Qin, Yu; Greaney, P. Alex; Evans, T. Matthew; +1 more

Related Subjects

36 MATERIALS SCIENCE
Modeling/simulations
Characterization
Stress/strain measurements
Amorphous materials
Plasticity

Title: Complexity analysis of serrated flows in a bulk metallic glass under constrained and unconstrained conditions

Citation Formats

References (50)

Similar Records

Related Subjects