The surface eroding thermocouple for fast heat flux measurement in DIII-D

Ren, J.; Donovan, David C.; Watkins, J. G.; Wang, Huiqian; Rudakov, D. L.; Murphy, Christopher; McLean, A. G.; Lasnier, C. J.; Unterberg, Ezekial; Thomas, D. M.; Boivin, R. L.

doi:10.1063/1.5038677

Title: The surface eroding thermocouple for fast heat flux measurement in DIII-D

Journal Article · Mon Oct 08 00:00:00 EDT 2018 · Review of Scientific Instruments

DOI:https://doi.org/10.1063/1.5038677· OSTI ID:1543206

Ren, J. ^[1];

^[2]; Watkins, J. G. ^[3]; Wang, Huiqian ^[4]; Rudakov, D. L. ^[5]; Murphy, Christopher ^[6]; McLean, A. G. ^[7]; Lasnier, C. J. ^[7];

^[8]; Thomas, D. M. ^[6]; Boivin, R. L. ^[6]

Univ. of Tennessee, Knoxville, TN (United States)
Univ. of Tennessee, Knoxville, TN (United States); Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
Sandia National Lab. (SNL-CA), Livermore, CA (United States)
Oak Ridge Associated Univ., Oak Ridge, TN (United States)
Univ. of California, San Diego, CA (United States)
General Atomics, San Diego, CA (United States)
Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

A novel type of surface eroding thermocouple (SETC) has been tested and demonstrated in the small angle slot (SAS) divertor of DIII-D for fast local heat flux measurements. The thermojunction of the SETC is formed between two thin (10 μm) ribbons, which are filed over to create microfiber junctions. These thermocouples are able to be exposed directly to the plasma at surface temperatures exceeding 2000 °C and are capable of sub-10 ms time resolution. Before installation in SAS, the SETCs were exposed in the lower DIII-D divertor during L-mode and H-mode discharges, from which results are presented. In preliminary tests, SETCs proved to be a qualified diagnostic to accurately measure both the intra-edge localized mode (ELM) and inter-ELM heat flux during H-mode shots with high frequency ELMs (hundreds of Hz) and to resolve heat flux profiles during strike point sweeps. The heat fluxes measured by using SETCs are consistent with the heat fluxes measured by using IR cameras and Langmuir probes. These new diagnostic capabilities will complement the existing IR camera measurements and will be of particularly significant value to measure surface heat flux in the SAS divertor or other regions where the IR camera lacks line of sight.

View Accepted Manuscript (DOE)

View Accepted Manuscript (Publisher)

Cite

Export

Save

Research Organization:: Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States)

Sponsoring Organization:: USDOE Office of Science (SC), Fusion Energy Sciences (FES); USDOE National Nuclear Security Administration (NNSA)

Grant/Contract Number:: AC05-00OR22725; SC0016318; FC02-04ER54698; FG02-07ER54917; NA0003525; AC52-07NA27344; SC0019256

OSTI ID:: 1543206

Alternate ID(s):: OSTI ID: 1476689; OSTI ID: 1660785

Journal Information:: Review of Scientific Instruments, Vol. 89, Issue 10; ISSN 0034-6748

Publisher:: American Institute of Physics (AIP)Copyright Statement

Country of Publication:: United States

Language:: English

Citation Metrics:

Cited by: 12 works

Citation information provided by
Web of Science

References (12)

Plasma detachment in divertor tokamaks Leonard, A. W. Plasma Physics and Controlled Fusion, Vol. 60, Issue 4 https://doi.org/10.1088/1361-6587/aaa7a9	journal	February 2018
SlimCS—compact low aspect ratio DEMO reactor with reduced-size central solenoid Tobita, K.; Nishio, S.; Sato, M. Nuclear Fusion, Vol. 47, Issue 8 https://doi.org/10.1088/0029-5515/47/8/022	journal	July 2007
Analysis of a multi-machine database on divertor heat fluxes Makowski, M. A.; Elder, D.; Gray, T. K. Physics of Plasmas, Vol. 19, Issue 5 https://doi.org/10.1063/1.4710517	journal	May 2012
D III-D divertor target heat flux measurements during ohmic and neutral beam heating Hill, D. N.; Petrie, T.; Ali Mahdavi, M. Nuclear Fusion, Vol. 28, Issue 5 https://doi.org/10.1088/0029-5515/28/5/015	journal	May 1988
Chapter 10: First Wall and Operational Diagnostics Lasnier, C. J.; Allen, S. L.; Boedo, J. A. Fusion Science and Technology, Vol. 53, Issue 2 https://doi.org/10.13182/fst08-a1682	journal	February 2008
Surface thermocouples for measurement of pulsed heat flux in the divertor of the Alcator C-Mod tokamak Brunner, D.; LaBombard, B. Review of Scientific Instruments, Vol. 83, Issue 3 https://doi.org/10.1063/1.3689770	journal	March 2012
Feedback system for divertor impurity seeding based on real-time measurements of surface heat flux in the Alcator C-Mod tokamak Brunner, D.; Burke, W.; Kuang, A. Q. Review of Scientific Instruments, Vol. 87, Issue 2 https://doi.org/10.1063/1.4941047	journal	February 2016
Surface heat flux feedback controlled impurity seeding experiments with Alcator C-Mod’s high- Z vertical target plate divertor: performance, limitations and implications for fusion power reactors Brunner, D.; Wolfe, S. M.; LaBombard, B. Nuclear Fusion, Vol. 57, Issue 8 https://doi.org/10.1088/1741-4326/aa7923	journal	July 2017
Calorimeter probe for the DIII-D divertor Watkins, J. G.; Lasnier, C. J.; Whyte, D. G. Review of Scientific Instruments, Vol. 74, Issue 3 https://doi.org/10.1063/1.1527241	journal	March 2003
Type-I ELM substructure on the divertor target plates in ASDEX Upgrade Eich, T.; Herrmann, A.; Neuhauser, J. Plasma Physics and Controlled Fusion, Vol. 47, Issue 6 https://doi.org/10.1088/0741-3335/47/6/007	journal	May 2005
Experimental measurements of the particle flux and sheath power transmission factor profiles in the divertor of DIII-D Donovan, D.; Buchenauer, D.; Watkins, J. Journal of Nuclear Materials, Vol. 438 https://doi.org/10.1016/j.jnucmat.2013.01.095	journal	July 2013
Recent sheath physics studies on DIII-D Watkins, J. G.; Labombard, B.; Stangeby, P. C. Journal of Nuclear Materials, Vol. 463 https://doi.org/10.1016/j.jnucmat.2014.12.109	journal	August 2015

Figures / Tables (8)

Similar Records

Measurements of multiple heat flux components at the divertor target by using surface eroding thermocouples (invited)

Journal Article · Thu Oct 27 00:00:00 EDT 2022 · Review of Scientific Instruments · OSTI ID:1543206

Ren, J.; Donovan, D. C.; Watkins, J. G.; +8 more

Development of Surface Eroding Thermocouples in Small Angle Slot Divertor in DIII-D

Journal Article · Tue Oct 08 00:00:00 EDT 2019 · IEEE Transactions on Plasma Science · OSTI ID:1543206

Ren, J.; Donovan, D.; Watkins, J. G.; +6 more

A Method to Identify the Heat Flux From Photons and Neutrals at the Divertor Target

Journal Article · Fri Jul 15 00:00:00 EDT 2022 · IEEE Transactions on Plasma Science · OSTI ID:1543206

Ren, J.; Donovan, D.; Watkins, J. G.; +5 more

Related Subjects

70 PLASMA PHYSICS AND FUSION TECHNOLOGY

Title: The surface eroding thermocouple for fast heat flux measurement in DIII-D

Citation Formats

References (12)

Figures / Tables (8)

Similar Records

Related Subjects