skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Homogenization of AlxCoCrFeNi high-entropy alloys with improved corrosion resistance

Journal Article · · Corrosion Science
 [1];  [2];  [3];  [4]; ORCiD logo [2];  [3];  [5]
  1. Univ. of Science and Technology Beijing, Beijing (China); The Univ. of Tennessee, Knoxville, TN (United States)
  2. Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
  3. The Univ. of Tennessee, Knoxville, TN (United States)
  4. CompuTherm LLC, Middleton, WI (United States)
  5. Univ. of Science and Technology Beijing, Beijing (China)

The present work investigates the homogenization effect of 1250 °C heat treatment on the AlxCoCrFeNi high-entropy alloys (HEAs). The multi-phase microstructures with chemical segregations are inevitable with the increased Al content in the alloys, which cause work function variations and localized corrosion. After heat treatment, the homogenization effect revealed by the microstructure simplification and chemical-segregation reduction leads to the decreased work function variations and the improved corrosion resistance. Furthermore, thermodynamic calculations that are reliable to predict the phase transformations of the AlxCoCrFeNi HEAs, indicates a further enhancement in corrosion resistance through annealing could be guided for many other HEAs systems.

Research Organization:
Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
Sponsoring Organization:
USDOE Office of Science (SC), Basic Energy Sciences (BES); USDOE Office of Fossil Energy and Carbon Management (FECM)
Grant/Contract Number:
AC05-00OR22725; FE-0024054; FE-0011194; FE-0008855; 2012AA03A507; 2008AA031702; DMR-1611180
OSTI ID:
1483187
Alternate ID(s):
OSTI ID: 1512320
Journal Information:
Corrosion Science, Vol. 133, Issue C; ISSN 0010-938X
Publisher:
ElsevierCopyright Statement
Country of Publication:
United States
Language:
English
Citation Metrics:
Cited by: 172 works
Citation information provided by
Web of Science

References (60)

Stainless steel optimization from quantum mechanical calculations journal December 2002
Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes journal May 2004
Microstructural development in equiatomic multicomponent alloys journal July 2004
Microstructures and properties of high-entropy alloys journal April 2014
Solid-Solution Phase Formation Rules for Multi-component Alloys journal June 2008
Refractory high-entropy alloys journal September 2010
Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy journal January 2015
Microstructure characterization of Al x CoCrCuFeNi high-entropy alloy system with multiprincipal elements journal April 2005
High-Entropy Alloys in Hexagonal Close-Packed Structure journal August 2015
Hexagonal High-entropy Alloys journal August 2014
A Novel Low-Density, High-Hardness, High-entropy Alloy with Close-packed Single-phase Nanocrystalline Structures journal December 2014
Local Structures of High-Entropy Alloys (HEAs) on Atomic Scales: An Overview journal August 2015
Corrosion-Resistant High-Entropy Alloys: A Review journal February 2017
Mixed-up metals make for stronger, tougher, stretchier alloys journal May 2016
Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys journal April 2014
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off journal May 2016
Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys journal September 2012
Fatigue behavior of a wrought Al0.5CoCrCuFeNi two-phase high-entropy alloy journal October 2015
Fracture Toughness and Fatigue Crack Growth Behavior of As-Cast High-Entropy Alloys journal August 2015
A fracture-resistant high-entropy alloy for cryogenic applications journal September 2014
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi journal December 2015
Aluminum Alloying Effects on Lattice Types, Microstructures, and Mechanical Behavior of High-Entropy Alloys Systems journal October 2013
Vibrational thermodynamics of materials journal May 2010
Corrosion characteristics of high entropy alloys journal March 2015
Corrosion of high entropy alloys journal August 2017
Electrochemical passive properties of AlxCoCrFeNi (x=0, 0.25, 0.50, 1.00) alloys in sulfuric acids journal March 2010
Microstructure and mechanical property of as-cast, -homogenized, and -deformed AlxCoCrFeNi (0≤x≤2) high-entropy alloys journal November 2009
Microstructure and Corrosion Properties of AlCoCrFeNi High Entropy Alloy Coatings Deposited on AISI 1045 Steel by the Electrospark Process journal December 2012
Effect of Precipitated Phases on the Pitting Corrosion of Z3CN20.09M Cast Duplex Stainless Steel journal January 2013
Corrosion of Al CoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior journal May 2017
Computational Thermodynamics Aided High-Entropy Alloy Design journal June 2012
An understanding of high entropy alloys from phase diagram calculations journal June 2014
Understanding phase stability of Al-Co-Cr-Fe-Ni high entropy alloys journal November 2016
Surface energy and work function of elemental metals journal September 1992
Influence of surface morphology on corrosion and electronic behavior journal January 2006
Characterization of AA2024‐T3 by Scanning Kelvin Probe Force Microscopy journal July 1998
Kelvin probe force microscopy journal June 1991
V. Contact electricity of metals journal July 1898
Corrosion behaviour of different tempers of AA7075 aluminium alloy journal July 2004
The mechanism of hydrogen-induced pitting corrosion in duplex stainless steel studied by SKPFM journal July 2012
Studies of the nobility of phases using scanning Kelvin probe microscopy and its relationship to corrosion behaviour of Ni–Al bronze in chloride media journal March 2015
High-resolution Kelvin probe microscopy in corrosion science: Scanning Kelvin probe force microscopy (SKPFM) versus classical scanning Kelvin probe (SKP) journal December 2007
Calibration of the scanning Kelvin probe force microscope under controlled environmental conditions journal April 2012
A closer look at constituent induced localised corrosion in Al-Cu-Mg alloys journal December 2016
Investigation and Discussion of Characteristics for Intermetallic Phases Common to Aluminum Alloys as a Function of Solution pH journal January 2008
Accelerated exploration of multi-principal element alloys with solid solution phases journal March 2015
Standard reference surfaces for work function measurements in air journal June 2001
Local potential measurements with the SKPFM on aluminium alloys journal July 2004
Open loop Kelvin probe force microscopy with single and multi-frequency excitation journal October 2013
Overview No. 104 The physical and mechanical properties of NiAl journal March 1993
High-Accuracy X-Ray Diffraction Analysis of Phase Evolution Sequence During Devitrification of Cu50Zr50 Metallic Glass journal November 2010
Critical pitting temperature measurements of stainless steels with an improved electrochemical method journal January 1989
The nucleation and growth of corrosion pits on stainless steel journal January 1993
Exploring the electrochemistry of 6xxx series aluminium alloys as a function of Si to Mg ratio, Cu content, ageing conditions and microstructure journal February 2016
Synergistic effect of cavitation erosion and corrosion of various engineering alloys in 3.5% NaCl solution journal October 2000
A study of the corrosion behavior of gamma titanium aluminide in 3.5wt% NaCl solution and seawater journal September 2007
Electrochemical corrosion performance in 3.5% NaCl of the electrodeposited nanocrystalline Ni films with and without dispersions of Cr nanoparticles journal June 2006
A study on the corrosion behavior of aluminum alloys in seawater journal January 2008
Microstructural influence on the electrochemical corrosion behaviour of dual-phase steels in 3.5% NaCl solution journal August 2005
Influence of micro-structure on corrosion behavior of a Ni-based superalloy in 3.5% NaCl journal September 2007

Cited By (6)

Microstructure and properties of CoCrNi medium-entropy alloy produced by gas atomization and spark plasma sintering journal April 2019
Microstructure and Properties of High-Entropy AlxCoCrFe2.7MoNi Alloy Coatings Prepared by Laser Cladding journal November 2019
Phase Constituent and Microhardness of As-Cast and Long-Time Annealed AlxCo2−xCrFeNi Multicomponent Alloys journal October 2019
Microstructure inhomogeneity of as-cast high-entropy alloy and heat treatment improvement journal July 2019
Microstructures, Mechanical Properties, and Corrosion Behaviors of Refractory High-Entropy ReTaWNbMo Alloys journal January 2020
The AC Soft Magnetic Properties of FeCoNixCuAl (1.0 ≤ x ≤ 1.75) High-Entropy Alloys journal December 2019