Effects of fuel thickness on thermal and mechanical performance of U10-Mo monolithic fuel plates
Monolithic fuels are being considered for conversion of high performance research and test reactors. These plate-type fuels are comprised of a low enrichment, high density U-Mo alloy fuels within an aluminum cladding. Although the plates have demonstrated satisfactory performance; still, use of a high density fuel in a foil form retains technical challenges that could affect the overall performance. To understand performance of this new design during fabrication and irradiation, the plates have been evaluated for various geometrical and operational variables. As a part of these set of parametric sensitivity studies, effects of foil thickness on performance were studied. Because high performance research reactors will utilize different fuel thicknesses, it is necessary to evaluate possible effects for a range of thicknesses that are being considered for various designs. Based on the preliminary design specifications, the fuel thicknesses were varied between the limiting cases. The bounding fuel thicknesses were 0.203 mm as minimum that is projected for ATR, and 0.635 mm as maximum that is projected for MITR. To study possible effects, a behavioral model was developed for a selected plate from RERTR-12 experiments and the plate was simulated with as run irradiation history. The simulations were repeated for a range of fuel thicknesses, while keeping the cladding thickness and the operational parameters the same. The results have indicated that the plates with thicker fuels would have higher temperatures, deformations and shutdown stresses. To investigate the effects of fuel thickness exclusively, operational parameters were scaled. In particular, a second set of simulations with prorated volumetric heat generation rates were performed. The results indicated that the fabrication stresses in the fuel foil decrease with an increasing fuel thickness. On contrary, irradiation stresses of the fuel at shutdown are higher for the plates with thicker fuels. Greater peak deformations occurred in plates with thicker fuels.
- Research Organization:
- Idaho National Lab. (INL), Idaho Falls, ID (United States)
- Sponsoring Organization:
- USDOE National Nuclear Security Administration (NNSA)
- DOE Contract Number:
- AC07-05ID14517
- OSTI ID:
- 1478531
- Report Number(s):
- INL/CON-16-40115-Rev000
- Resource Relation:
- Conference: IMECE 2017, International Mechanical Engineering Congress and Exposition, Tampa, Florida, USA, 11/03/2017 - 11/09/2017
- Country of Publication:
- United States
- Language:
- English
Similar Records
Effects of the foil flatness on the stress-strain characteristics of U10Mo alloy based monolithic mini-plates
Effects of the shape of the foil corners on the irradiation performance of U10Mo alloy based monolithic mini-plates