skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Measuring explosive non-ideality

Conference ·
OSTI ID:14705

The sonic reaction zone length may be measured by four methods: (1) size effect, (2) detonation front curvature, (3) crystal interface velocity and (4) in-situ gauges. The amount of data decreases exponentially from (1) to (4) with there being almost no gauge data for prompt detonation at steady state. The ease and clarity of obtaining the reaction zone length increases from (1) to (4). The method of getting the reaction zone length, <x{sub e}>, is described for the four methods. A measure of non-ideality is proposed: the reaction zone length divided by the cylinder radius. N = <x{sub e}>/R{sub o}. N = 0 for true ideality. It also decreases with increasing radius as it should. For N < 0.10, an equilibrium EOS like the JWL may be used. For N > 0.10, a time-dependent description is essential. The crystal experiment, which measures the particle velocity of an explosive-transparent material interface, is presently rising in importance. We examine the data from three experiments and apply: (1) an impedance correction that transfers the explosive C-J particle velocity to the corresponding value for the interface, and (2) multiplies the interface time by 3/4 to simulate the explosive speed of sound. The result is a reaction zone length comparable to those obtained by other means. A few explosives have reaction zones so small that the change of slope in the particle velocity is easily seen.

Research Organization:
Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
Sponsoring Organization:
USDOE Office of Defense Programs (DP) (US)
DOE Contract Number:
W-7405-ENG-48
OSTI ID:
14705
Report Number(s):
UCRL-JC-132499; DP0102052; DP0102052; TRN: AH200129%%395
Resource Relation:
Conference: International Workshop on the Modeling of Non-ideal Explosives, Energetic Materials Research and Testing Center, New Mexico, Institute of Mining and Technology, Socorro, NM (US), 03/16/1999--03/18/1999; Other Information: PBD: 17 Feb 1999
Country of Publication:
United States
Language:
English