skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: HOM mitigation for FCC-ee

Program Document ·
OSTI ID:1443985
 [1]
  1. SLAC National Accelerator Lab., Menlo Park, CA (United States)

In this work, high electron and positron currents (1.5 A) are planned to be used in the Future Circular electron-positron Collider (FCC-ee) with a goal to archive high luminosity of order of 2.3 1036 cm-2s-2 at the Z-production collision at the beam energy of 45.6 GeV. Coherent effects at the high-current machine impose certain limitations on the magnitude of the impedance of the machine. The potential well distortion due to inductive part of the impedance may give a large bunch lengthening. The microwave longitudinal and transverse instability set the total limit on the effective impedance. The multi bunch longitudinal and transverse mode-coupling can be more dangerous for the beam dynamics, but fortunately the feedback system can be used to damp these instabilities. An additional effect of the resonance part of the impedance is the HOM (Higher Order Modes) heating. It can happen not only in the RF cavities, but anywhere in the machine beam pipe where trapped mode or traveling waves absorb their power. Temperature raise due to HOM heating can be very high in the closed volumes without cooling. Very important the HOM heating is in the Interaction Region (IR), because it brings an additional background. The local heating in the IR can reach tens of kW of power. Some part of the electromagnetic waves, excited by the beam, with a frequency above the cutoff frequency will travel away from the IR and go down the beam pipe. The absorption of these waves can bring heating problems to other parts of the accelerator. A large energy loss of the beams in the interaction region can be a severe problem. The temperature of the IR chamber will go up and the vacuum will be spoiled. If the IR chamber has small gaps or hidden cavities (like in shielded bellows or valves), then electric sparks or arcing may cause additional vacuum spikes. Heating of nonevaporable getters (if they are will be used in the IR) may bring vacuum instability (the temperature can go above the recovery level). Lastly, all of these things can make the backgrounds much higher. One can find a description of these effects in publications. Impedance study for FCC-ee can be found in reference.

Research Organization:
SLAC National Accelerator Lab., Menlo Park, CA (United States)
Sponsoring Organization:
USDOE Office of Science (SC)
DOE Contract Number:
AC02-76SF00515
OSTI ID:
1443985
Report Number(s):
SLAC-PUB-17210
Country of Publication:
United States
Language:
English

Similar Records

Beam instability studies at the APS
Conference · Sat Oct 01 00:00:00 EDT 1994 · OSTI ID:1443985

Next generation HOM-damping
Journal Article · Mon May 15 00:00:00 EDT 2017 · Superconductor Science and Technology · OSTI ID:1443985

Analysis of Coupled Bunch Instabilities in the NSLS-II Storage Ring with a 7-cell PETRA-III RF Structure
Technical Report · Tue Feb 25 00:00:00 EST 2014 · OSTI ID:1443985