Custom 3D Printable Silicones with Tunable Stiffness

Durban, Matthew M.; Lenhardt, Jeremy M.; Wu, Amanda S.; Small, Ward; Bryson, Taylor M.; Perez-Perez, Lemuel; Nguyen, Du T.; Gammon, Stuart; Smay, James E.; Duoss, Eric B.; Lewicki, James P.; Wilson, Thomas S.

doi:10.1002/marc.201700563

Title: Custom 3D Printable Silicones with Tunable Stiffness

Journal Article · Wed Dec 06 00:00:00 EST 2017 · Macromolecular Rapid Communications

DOI:https://doi.org/10.1002/marc.201700563· OSTI ID:1417274

Durban, Matthew M. ^[1];

^[1]; Wu, Amanda S. ^[1]; Small, Ward ^[1]; Bryson, Taylor M. ^[1]; Perez-Perez, Lemuel ^[1]; Nguyen, Du T. ^[1]; Gammon, Stuart ^[1]; Smay, James E. ^[2]; Duoss, Eric B. ^[1]; Lewicki, James P. ^[1]; Wilson, Thomas S. ^[1]

Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
Oklahoma State Univ., Stillwater, OK (United States). School of Chemical Engineering

Abstract Silicone elastomers have broad versatility within a variety of potential advanced materials applications, such as soft robotics, biomedical devices, and metamaterials. A series of custom 3D printable silicone inks with tunable stiffness is developed, formulated, and characterized. The silicone inks exhibit excellent rheological behavior for 3D printing, as observed from the printing of porous structures with controlled architectures. Herein, the capability to tune the stiffness of printable silicone materials via careful control over the chemistry, network formation, and crosslink density of the ink formulations in order to overcome the challenging interplay between ink development, post‐processing, material properties, and performance is demonstrated.

View Accepted Manuscript (DOE)

View Accepted Manuscript (Publisher)

Cite

Export

Save

Research Organization:: Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)

Sponsoring Organization:: USDOE

Grant/Contract Number:: AC52-07NA27344; DE‐AC52‐07NA27344

OSTI ID:: 1417274

Alternate ID(s):: OSTI ID: 1412573

Report Number(s):: LLNL-JRNL-735273; TRN: US1801016

Journal Information:: Macromolecular Rapid Communications, Vol. 39, Issue 4; ISSN 1022-1336

Publisher:: WileyCopyright Statement

Country of Publication:: United States

Language:: English

Citation Metrics:

Cited by: 35 works

Citation information provided by
Web of Science

References (46)

Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness Berger, J. B.; Wadley, H. N. G.; McMeeking, R. M. Nature, Vol. 543, Issue 7646 https://doi.org/10.1038/nature21075	journal	February 2017
Bound rubber and “crepe hardening” in silicone rubber Vondráček, Petr; Schätz, Miroslav Journal of Applied Polymer Science, Vol. 21, Issue 12 https://doi.org/10.1002/app.1977.070211203	journal	December 1977
Frontiers of 3D Printing/Additive Manufacturing: from Human Organs to Aircraft Fabrication† Murr, Lawrence E. Journal of Materials Science & Technology, Vol. 32, Issue 10 https://doi.org/10.1016/j.jmst.2016.08.011	journal	October 2016
3D Printing by Multiphase Silicone/Water Capillary Inks Roh, Sangchul; Parekh, Dishit P.; Bharti, Bhuvnesh Advanced Materials, Vol. 29, Issue 30 https://doi.org/10.1002/adma.201701554	journal	June 2017
Direct Writing of Three-Dimensional Polymer Scaffolds Using Colloidal Gels Xie, B.; Parkhill, R. L.; Warren, W. L. Advanced Functional Materials, Vol. 16, Issue 13 https://doi.org/10.1002/adfm.200500666	journal	September 2006
3D printed cellular solid outperforms traditional stochastic foam in long-term mechanical response Maiti, A.; Small, W.; Lewicki, J. P. Scientific Reports, Vol. 6, Issue 1 https://doi.org/10.1038/srep24871	journal	April 2016
Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores Zhu, Cheng; Liu, Tianyu; Qian, Fang Nano Letters, Vol. 16, Issue 6, p. 3448-3456 https://doi.org/10.1021/acs.nanolett.5b04965	journal	January 2016
Controlling Material Reactivity Using Architecture Sullivan, Kyle T.; Zhu, Cheng; Duoss, Eric B. Advanced Materials, Vol. 28, Issue 10 https://doi.org/10.1002/adma.201504286	journal	December 2015
A Bioactive Carbon Nanotube-Based Ink for Printing 2D and 3D Flexible Electronics Shin, Su Ryon; Farzad, Raziyeh; Tamayol, Ali Advanced Materials, Vol. 28, Issue 17 https://doi.org/10.1002/adma.201506420	journal	February 2016
In-Plane Deformation Mechanics for Highly Stretchable Electronics Su, Yewang; Ping, Xuecheng; Yu, Ki Jun Advanced Materials, Vol. 29, Issue 8 https://doi.org/10.1002/adma.201604989	journal	December 2016
Strong, lightweight, and recoverable three-dimensional ceramic nanolattices Meza, L. R.; Das, S.; Greer, J. R. Science, Vol. 345, Issue 6202 https://doi.org/10.1126/science.1255908	journal	September 2014
Architected Cellular Materials Schaedler, Tobias A.; Carter, William B. Annual Review of Materials Research, Vol. 46, Issue 1 https://doi.org/10.1146/annurev-matsci-070115-031624	journal	July 2016
Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing Patel, Dinesh K.; Sakhaei, Amir Hosein; Layani, Michael Advanced Materials, Vol. 29, Issue 15 https://doi.org/10.1002/adma.201606000	journal	February 2017
Multistable Architected Materials for Trapping Elastic Strain Energy Shan, Sicong; Kang, Sung H.; Raney, Jordan R. Advanced Materials, Vol. 27, Issue 29 https://doi.org/10.1002/adma.201501708	journal	June 2015
Optoelectronically innervated soft prosthetic hand via stretchable optical waveguides Zhao, Huichan; O’Brien, Kevin; Li, Shuo Science Robotics, Vol. 1, Issue 1 https://doi.org/10.1126/scirobotics.aai7529	journal	November 2016
Correlations between thixotropic and structural properties of molecular gels with crystalline networks Ajay Mallia, V.; Weiss, Richard G. Soft Matter, Vol. 12, Issue 16 https://doi.org/10.1039/C6SM00377J	journal	January 2016
3D Printed Silicones with Shape Memory Wu, Amanda S.; Small IV, Ward; Bryson, Taylor M. Scientific Reports, Vol. 7, Issue 1 https://doi.org/10.1038/s41598-017-04663-z	journal	July 2017
Colloidal Inks for Directed Assembly of 3-D Periodic Structures Smay, James E.; Cesarano, Joseph; Lewis, Jennifer A. Langmuir, Vol. 18, Issue 14, p. 5429-5437 https://doi.org/10.1021/la0257135	journal	July 2002
Direct ink writing of 3–3 piezoelectric composite Li, Ya-Yun; Li, Long-Tu; Li, Bo Journal of Alloys and Compounds, Vol. 620 https://doi.org/10.1016/j.jallcom.2014.09.124	journal	January 2015
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing Lind, Johan U.; Busbee, Travis A.; Valentine, Alexander D. Nature Materials, Vol. 16, Issue 3 https://doi.org/10.1038/nmat4782	journal	October 2016
Three-Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness Duoss, Eric B.; Weisgraber, Todd H.; Hearon, Keith Advanced Functional Materials, Vol. 24, Issue 31 https://doi.org/10.1002/adfm.201400451	journal	May 2014
Melt and glass crystallization of PDMS and PDMS silica nanocomposites Bosq, Nicolas; Guigo, Nathanaël; Persello, Jacques Phys. Chem. Chem. Phys., Vol. 16, Issue 17 https://doi.org/10.1039/C4CP00164H	journal	January 2014
Thixotropy—a review Barnes, Howard A. Journal of Non-Newtonian Fluid Mechanics, Vol. 70, Issue 1-2 https://doi.org/10.1016/S0377-0257(97)00004-9	journal	May 1997
Effects of filler–polymer interactions on cold-crystallization kinetics in crosslinked, silica-filled polydimethylsiloxane/polydiphenylsiloxane copolymer melts Chien, Allen; Maxwell, Robert S.; DeTeresa, Steve Journal of Polymer Science Part B: Polymer Physics, Vol. 44, Issue 13 https://doi.org/10.1002/polb.20848	journal	January 2006
Structural optimization of 3D-printed synthetic spider webs for high strength Qin, Zhao; Compton, Brett G.; Lewis, Jennifer A. Nature Communications, Vol. 6, Issue 1 https://doi.org/10.1038/ncomms8038	journal	May 2015
3D Printed Stretchable Tactile Sensors Guo, Shuang-Zhuang; Qiu, Kaiyan; Meng, Fanben Advanced Materials, Vol. 29, Issue 27 https://doi.org/10.1002/adma.201701218	journal	May 2017
Topology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations Clausen, Anders; Wang, Fengwen; Jensen, Jakob S. Advanced Materials, Vol. 27, Issue 37 https://doi.org/10.1002/adma.201502485	journal	August 2015
Determination of water, silanol, and strained siloxane on silica surfaces Kellum, Gene E.; Smith, Robert Carl. Analytical Chemistry, Vol. 39, Issue 3 https://doi.org/10.1021/ac60247a046	journal	March 1967
Ultralight, ultrastiff mechanical metamaterials Zheng, X.; Lee, H.; Weisgraber, T. H. Science, Vol. 344, Issue 6190 https://doi.org/10.1126/science.1252291	journal	June 2014
Recent Progress in Materials and Devices toward Printable and Flexible Sensors Rim, You Seung; Bae, Sang-Hoon; Chen, Huajun Advanced Materials, Vol. 28, Issue 22 https://doi.org/10.1002/adma.201505118	journal	February 2016
Direct-Write Assembly of 3D Hydrogel Scaffolds for Guided Cell Growth Barry, Robert A.; Shepherd, Robert F.; Hanson, Jennifer N. Advanced Materials, Vol. 21, Issue 23 https://doi.org/10.1002/adma.200803702	journal	June 2009
Multiscale metallic metamaterials Zheng, Xiaoyu; Smith, William; Jackson, Julie Nature Materials, Vol. 15, Issue 10 https://doi.org/10.1038/nmat4694	journal	July 2016
Fabrication of ZnO periodic structures by 3D printing Tubío, Carmen R.; Guitián, Francisco; Gil, Alvaro Journal of the European Ceramic Society, Vol. 36, Issue 14 https://doi.org/10.1016/j.jeurceramsoc.2016.05.025	journal	November 2016
Buckling Pneumatic Linear Actuators Inspired by Muscle Yang, Dian; Verma, Mohit S.; So, Ju-Hee Advanced Materials Technologies, Vol. 1, Issue 3 https://doi.org/10.1002/admt.201600055	journal	June 2016
Printing soft matter in three dimensions Truby, Ryan L.; Lewis, Jennifer A. Nature, Vol. 540, Issue 7633 https://doi.org/10.1038/nature21003	journal	December 2016
Morphing Metal and Elastomer Bicontinuous Foams for Reversible Stiffness, Shape Memory, and Self-Healing Soft Machines Van Meerbeek, Ilse M.; Mac Murray, Benjamin C.; Kim, Jae Woo Advanced Materials, Vol. 28, Issue 14 https://doi.org/10.1002/adma.201505991	journal	February 2016
3D Printing of Shape Memory Polymers for Flexible Electronic Devices Zarek, Matt; Layani, Michael; Cooperstein, Ido Advanced Materials, Vol. 28, Issue 22 https://doi.org/10.1002/adma.201503132	journal	September 2015
An integrated design and fabrication strategy for entirely soft, autonomous robots Wehner, Michael; Truby, Ryan L.; Fitzgerald, Daniel J. Nature, Vol. 536, Issue 7617 https://doi.org/10.1038/nature19100	journal	August 2016
3D printing of concentrated emulsions into multiphase biocompatible soft materials Sommer, Marianne R.; Alison, Lauriane; Minas, Clara Soft Matter, Vol. 13, Issue 9 https://doi.org/10.1039/C6SM02682F	journal	January 2017
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers Muth, Joseph T.; Vogt, Daniel M.; Truby, Ryan L. Advanced Materials, Vol. 26, Issue 36, p. 6307-6312 https://doi.org/10.1002/adma.201400334	journal	June 2014
Poroelastic Foams for Simple Fabrication of Complex Soft Robots Mac Murray, Benjamin C.; An, Xintong; Robinson, Sanlin S. Advanced Materials, Vol. 27, Issue 41 https://doi.org/10.1002/adma.201503464	journal	September 2015
A 3D-printed, functionally graded soft robot powered by combustion Bartlett, N. W.; Tolley, M. T.; Overvelde, J. T. B. Science, Vol. 349, Issue 6244 https://doi.org/10.1126/science.aab0129	journal	July 2015
Three-dimensional bioprinting of thick vascularized tissues Kolesky, David B.; Homan, Kimberly A.; Skylar-Scott, Mark A. Proceedings of the National Academy of Sciences, Vol. 113, Issue 12 https://doi.org/10.1073/pnas.1521342113	journal	March 2016
Highly compressible 3D periodic graphene aerogel microlattices Zhu, Cheng; Han, T. Yong-Jin; Duoss, Eric B. Nature Communications, Vol. 6, Issue 1 https://doi.org/10.1038/ncomms7962	journal	April 2015
Thixotropy Mewis, Jan; Wagner, Norman J. Advances in Colloid and Interface Science, Vol. 147-148 https://doi.org/10.1016/j.cis.2008.09.005	journal	March 2009
Direct Ink Writing of Silicon Carbide for Microwave Optics: Direct Ink Writing of Silicon Carbide for Microwave Larson, Chris M.; Choi, Justin J.; Gallardo, Patricio A. Advanced Engineering Materials, Vol. 18, Issue 1 https://doi.org/10.1002/adem.201500298	journal	September 2015

Cited By (4)

Active Mixing of Disparate Inks for Multimaterial 3D Printing Ortega, Jason M.; Golobic, Melody; Sain, John D. Advanced Materials Technologies, Vol. 4, Issue 7 https://doi.org/10.1002/admt.201800717	journal	April 2019
3D Printing of Compositional Gradients Using the Microfluidic Circuit Analogy Nguyen, Du T.; Yee, Timothy D.; Dudukovic, Nikola A. Advanced Materials Technologies, Vol. 4, Issue 12 https://doi.org/10.1002/admt.201900784	journal	November 2019
High-speed material jetting additive manufacturing of silicone structures: mechanical characterization Liravi, Farzad; Salarian, Mehrnaz; Dal Castel, Charles Progress in Additive Manufacturing, Vol. 4, Issue 4 https://doi.org/10.1007/s40964-019-00097-3	journal	September 2019
Preparation and performance of ultraviolet curable silicone resins used for ultraviolet cured coating and ultraviolet-assisted 3D printing materials Yang, Xiongfa; Chen, Qiong; Bao, Haoyuan OSA Continuum, Vol. 1, Issue 2 https://doi.org/10.1364/osac.1.000542	journal	January 2018

Similar Records

3D Printing of High Viscosity Reinforced Silicone Elastomers

Journal Article · Thu Jul 08 00:00:00 EDT 2021 · Polymers · OSTI ID:1417274

Rodriguez, Nicholas; Ruelas, Samantha; Forien, Jean-Baptiste; +7 more

On the cogent formulation of an elastomeric silicone ink material for direct ink write ( DIW ) 3D printing

Journal Article · Wed Mar 27 00:00:00 EDT 2024 · Polymer Engineering and Science · OSTI ID:1417274

Elahee, G. M. Fazley; Cheng, Xiang; Rong, Lihan; +4 more

Rheology guiding the design and printability of aqueous colloidal composites for additive manufacturing

Journal Article · Mon Apr 24 00:00:00 EDT 2023 · Journal of Vinyl & Additive Technology · OSTI ID:1417274

Bean, Ren H.; Rau, Daniel A.; Williams, Christopher B.; +1 more

Related Subjects

36 MATERIALS SCIENCE
37 INORGANIC
ORGANIC
PHYSICAL AND ANALYTICAL CHEMISTRY
3D printing
additive manufacturing
silicones
tunable stiffness

Title: Custom 3D Printable Silicones with Tunable Stiffness

Citation Formats

References (46)

Cited By (4)

Similar Records

Related Subjects