Electroless Deposition of Palladium on Macroscopic 3D-Printed Polymers with Dense Microlattice Architectures for Development of Multifunctional Composite Materials

Jones, Christopher G.; Mills, Bernice E.; Nishimoto, Ryan K.; Robinson, David B.

doi:10.1149/2.1341713jes

Title: Electroless Deposition of Palladium on Macroscopic 3D-Printed Polymers with Dense Microlattice Architectures for Development of Multifunctional Composite Materials

Journal Article · Wed Oct 25 00:00:00 EDT 2017 · Journal of the Electrochemical Society

DOI:https://doi.org/10.1149/2.1341713jes· OSTI ID:1411227

^[1]; Mills, Bernice E. ^[1]; Nishimoto, Ryan K. ^[1]; Robinson, David B. ^[1]

Sandia National Lab. (SNL-CA), Livermore, CA (United States)

A simple procedure has been developed to create palladium (Pd) films on the surface of several common polymers used in commercial fused deposition modeling (FDM) and stereolithography (SLA) based three-dimensional (3D) printing by an electroless deposition process. The procedure can be performed at room temperature, with equipment less expensive than many 3D printers, and occurs rapidly enough to achieve full coverage of the film within a few minutes. 3D substrates composed of dense logpile or cubic lattices with part sizes in the mm to cm range, and feature sizes as small as 150 μm were designed and printed using commercially available 3D printers. The deposition procedure was successfully adapted to show full coverage in the lattice substrates. As a result, the ability to design, print, and metallize highly ordered three-dimensional microscale structures could accelerate development of a range of optimized chemical and mechanical engineering systems.

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

Sponsoring Organization:: USDOE National Nuclear Security Administration (NNSA)

Grant/Contract Number:: AC04-94AL85000

OSTI ID:: 1411227

Report Number(s):: SAND2017-11817J; 658300; TRN: US1800201

Journal Information:: Journal of the Electrochemical Society, Vol. 164, Issue 13; ISSN 0013-4651

Publisher:: The Electrochemical SocietyCopyright Statement

Country of Publication:: United States

Language:: English

Citation Metrics:

Cited by: 11 works

Citation information provided by
Web of Science

References (29)

Self-assembled three-dimensional and compressible interdigitated thin-film supercapacitors and batteries Nyström, Gustav; Marais, Andrew; Karabulut, Erdem Nature Communications, Vol. 6, Issue 1 https://doi.org/10.1038/ncomms8259	journal	May 2015
Laser additive manufacturing of stainless steel micro fuel cells Scotti, Gianmario; Matilainen, Ville; Kanninen, Petri Journal of Power Sources, Vol. 272 https://doi.org/10.1016/j.jpowsour.2014.08.096	journal	December 2014
The upcoming 3D-printing revolution in microfluidics Bhattacharjee, Nirveek; Urrios, Arturo; Kang, Shawn Lab on a Chip, Vol. 16, Issue 10 https://doi.org/10.1039/C6LC00163G	journal	January 2016
A review on 3D micro-additive manufacturing technologies Vaezi, Mohammad; Seitz, Hermann; Yang, Shoufeng The International Journal of Advanced Manufacturing Technology, Vol. 67, Issue 5-8 https://doi.org/10.1007/s00170-012-4605-2	journal	November 2012
Low-Distortion Surface Functionalization of Polymeric Microstructures Kuebler, Stephen M.; Narayanan, Ananthakrishnan; Karas, Dale E. Macromolecular Chemistry and Physics, Vol. 215, Issue 16 https://doi.org/10.1002/macp.201400226	journal	July 2014
Covalent assembly of metal nanoparticles on cellulose fabric and its antimicrobial activity Park, Sung Yong; Chung, Jae Woo; Priestley, Rodney D. Cellulose, Vol. 19, Issue 6 https://doi.org/10.1007/s10570-012-9773-6	journal	September 2012
3D bioprinting of tissues and organs Murphy, Sean V.; Atala, Anthony Nature Biotechnology, Vol. 32, Issue 8 https://doi.org/10.1038/nbt.2958	journal	August 2014
Electroless nickel, alloy, composite and nano coatings – A critical review Sudagar, Jothi; Lian, Jianshe; Sha, Wei Journal of Alloys and Compounds, Vol. 571 https://doi.org/10.1016/j.jallcom.2013.03.107	journal	September 2013
Electroless Pd and Ag deposition kinetics of the composite Pd and Pd/Ag membranes synthesized from agitated plating baths Ayturk, M. Engin; Ma, Yi Hua Journal of Membrane Science, Vol. 330, Issue 1-2, p. 233-245 https://doi.org/10.1016/j.memsci.2008.12.062	journal	March 2009
Multiscale metallic metamaterials Zheng, Xiaoyu; Smith, William; Jackson, Julie Nature Materials, Vol. 15, Issue 10 https://doi.org/10.1038/nmat4694	journal	July 2016
Plating on acrylonitrile–butadiene–styrene (ABS) plastic: a review Olivera, Sharon; Muralidhara, Handanahally Basavarajaiah; Venkatesh, Krishna Journal of Materials Science, Vol. 51, Issue 8 https://doi.org/10.1007/s10853-015-9668-7	journal	January 2016
Route to Three-Dimensional Metallized Microstructures Using Cross-Linkable Epoxide SU-8 Chen, Yun-Sheng; Tal, Amir; Kuebler, Stephen M. Chemistry of Materials, Vol. 19, Issue 16 https://doi.org/10.1021/cm0710812	journal	August 2007
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones Khairallah, Saad A.; Anderson, Andrew T.; Rubenchik, Alexander Acta Materialia, Vol. 108 https://doi.org/10.1016/j.actamat.2016.02.014	journal	April 2016
3D Printing of Interdigitated Li-Ion Microbattery Architectures Sun, Ke; Wei, Teng-Sing; Ahn, Bok Yeop Advanced Materials, Vol. 25, Issue 33, p. 4539-4543 https://doi.org/10.1002/adma.201301036	journal	June 2013
Additive Manufacturing of Metal Cellular Structures: Design and Fabrication Yang, Li; Harrysson, Ola; Cormier, Denis JOM, Vol. 67, Issue 3 https://doi.org/10.1007/s11837-015-1322-y	journal	February 2015
An efficient and scalable approach for generating topologically optimized cellular structures for additive manufacturing Robbins, J.; Owen, S. J.; Clark, B. W. Additive Manufacturing, Vol. 12 https://doi.org/10.1016/j.addma.2016.06.013	journal	October 2016
Selective electroless plating to fabricate complex three-dimensional metallic micro/nanostructures Formanek, Florian; Takeyasu, Nobuyuki; Tanaka, Takuo Applied Physics Letters, Vol. 88, Issue 8 https://doi.org/10.1063/1.2178261	journal	February 2006
A new palladium-free surface activation process for Ni electroless plating on ABS plastic Tang, Xuejiao; Bi, Chengliang; Han, Changxiu Materials Letters, Vol. 63, Issue 11 https://doi.org/10.1016/j.matlet.2009.01.006	journal	April 2009
Three-dimensional bicontinuous ultrafast-charge and -discharge bulk battery electrodes Zhang, Huigang; Yu, Xindi; Braun, Paul V. Nature Nanotechnology, Vol. 6, Issue 5, p. 277-281 https://doi.org/10.1038/nnano.2011.38	journal	March 2011
Fabrication of 3D metal/polymer microstructures by site-selective metal coating Takeyasu, N.; Tanaka, T.; Kawata, S. Applied Physics A, Vol. 90, Issue 2 https://doi.org/10.1007/s00339-007-4298-9	journal	October 2007
Ultralight Metallic Microlattices Schaedler, T. A.; Jacobsen, A. J.; Torrents, A. Science, Vol. 334, Issue 6058 https://doi.org/10.1126/science.1211649	journal	November 2011
Metal-nanoshelled three-dimensional photonic lattices Kaneko, Koshiro; Yamamoto, Kazuo; Kawata, Satoshi Optics Letters, Vol. 33, Issue 17 https://doi.org/10.1364/OL.33.001999	journal	January 2008
Metal Deposition Deep into Microstructure by Electroless Plating Takeyasu, Nobuyuki; Tanaka, Takuo; Kawata, Satoshi Japanese Journal of Applied Physics, Vol. 44, Issue No. 35 https://doi.org/10.1143/JJAP.44.L1134	journal	August 2005
3D printing of a heterogeneous copper-based catalyst Tubío, Carmen R.; Azuaje, Jhonny; Escalante, Luz Journal of Catalysis, Vol. 334 https://doi.org/10.1016/j.jcat.2015.11.019	journal	February 2016
Latest advances in the manufacturing of 3D rechargeable lithium microbatteries Ferrari, Stefania; Loveridge, Melanie; Beattie, Shane D. Journal of Power Sources, Vol. 286, p. 25-46 https://doi.org/10.1016/j.jpowsour.2015.03.133	journal	July 2015
Initiator-Integrated 3D Printing Enables the Formation of Complex Metallic Architectures Wang, Xiaolong; Guo, Qiuquan; Cai, Xiaobing ACS Applied Materials & Interfaces, Vol. 6, Issue 4 https://doi.org/10.1021/am4050822	journal	December 2013
Selective Functionalization of 3-D Polymer Microstructures Farrer, Richard A.; LaFratta, Christopher N.; Li, Linjie Journal of the American Chemical Society, Vol. 128, Issue 6 https://doi.org/10.1021/ja0583620	journal	February 2006
Process of direct copper plating on ABS plastics Gui-xiang, Wang; Ning, Li; Hui-li, Hu Applied Surface Science, Vol. 253, Issue 2 https://doi.org/10.1016/j.apsusc.2005.12.106	journal	November 2006
A novel surface activation method for Ni/Au electroless plating of acrylonitrile–butadiene–styrene Tang, Xuejiao; Wang, Jingang; Wang, Chengjun Surface and Coatings Technology, Vol. 206, Issue 6 https://doi.org/10.1016/j.surfcoat.2011.08.064	journal	December 2011

Cited By (2)

A Numerical model of exchange chromatography through 3-D lattice structures Salloum, Maher; Robinson, David B. AIChE Journal, Vol. 64, Issue 5 https://doi.org/10.1002/aic.16108	journal	February 2018
Dynamic energy absorption characteristics of additively-manufactured shape-recovering lattice structures Davami, Keivan; Mohsenizadeh, Mehrdad; Munther, Michael Materials Research Express, Vol. 6, Issue 4 https://doi.org/10.1088/2053-1591/aaf78c	journal	January 2019

Similar Records

High Throughput Screening of 3D Printable Resins: Adjusting the Surface and Catalytic Properties of Multifunctional Architectures

Journal Article · Mon Sep 30 00:00:00 EDT 2019 · ACS Applied Polymer Materials · OSTI ID:1411227

Manzano, J. Sebastián; Wang, Hsin; Slowing, Igor I.

TU-H-CAMPUS-TeP1-05: Fast Processed 3D Printing-Aided Urethane Resin (PUR) Bolus in Radiation Therapy

Journal Article · Wed Jun 15 00:00:00 EDT 2016 · Medical Physics · OSTI ID:1411227

Zhao, B; Chiu, T; Gu, X; +3 more

Mechanically and Thermally Enhanced 3D-Printed Photocurable Polymer Nanocomposites Containing Functionalized Chitin Nanowhiskers by Stereolithography

Journal Article · Tue Mar 29 00:00:00 EDT 2022 · ACS Applied Polymer Materials · OSTI ID:1411227

Maalihan, Reymark D.; Chen, Qiyi; Tamura, Hiroshi; +4 more

Related Subjects

36 MATERIALS SCIENCE

Title: Electroless Deposition of Palladium on Macroscopic 3D-Printed Polymers with Dense Microlattice Architectures for Development of Multifunctional Composite Materials

Citation Formats

References (29)

Cited By (2)

Similar Records

Related Subjects