Thin film surface modifications of thin/tunable liquid/gas diffusion layers for high-efficiency proton exchange membrane electrolyzer cells

Kang, Zhenye; Mo, Jingke; Yang, Gaoqiang; Li, Yifan; Talley, Derrick A.; Retterer, Scott T.; Cullen, David A.; Toops, Todd J.; Brady, Michael P.; Bender, Guido; Pivovar, Bryan S.; Green, Johney B.; Zhang, Feng-Yuan

doi:10.1016/j.apenergy.2017.09.004

Title: Thin film surface modifications of thin/tunable liquid/gas diffusion layers for high-efficiency proton exchange membrane electrolyzer cells

Journal Article · Thu Sep 14 00:00:00 EDT 2017 · Applied Energy

DOI:https://doi.org/10.1016/j.apenergy.2017.09.004· OSTI ID:1393374

Kang, Zhenye ^[1]; Mo, Jingke ^[1]; Yang, Gaoqiang ^[1]; Li, Yifan ^[1]; Talley, Derrick A. ^[1]; Retterer, Scott T. ^[2]; Cullen, David A. ^[2]; Toops, Todd J. ^[2]; Brady, Michael P. ^[2]; Bender, Guido ^[3]; Pivovar, Bryan S. ^[3];

^[3];

^[1]

Univ. of Tennessee, Knoxville, TN (United States). Nanodynamics and High-Efficiency Lab for Propulsion and Power (NanoHELP), Department of Mechanical, Aerospace & Biomedical Engineering, UT Space Institute
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
National Renewable Energy Lab. (NREL), Golden, CO (United States)

We present that a proton exchange membrane electrolyzer cell (PEMEC) is one of the most promising devices for high-efficiency and low-cost energy storage and ultrahigh purity hydrogen production. As one of the critical components in PEMECs, the titanium thin/tunable LGDL (TT-LGDL) with its advantages of small thickness, planar surface, straight-through pores, and well-controlled pore morphologies, achieved superior multifunctional performance for hydrogen and oxygen production from water splitting even at low temperature. Different thin film surface treatments on the novel TT-LGDLs for enhancing the interfacial contacts and PEMEC performance were investigated both in-situ and ex-situ for the first time. Surface modified TT-LGDLs with about 180 nm thick Au thin film yielded performance improvement (voltage reduction), from 1.6849 V with untreated TT-LGDLs to only 1.6328 V with treated TT-LGDLs at 2.0 A/cm² and 80°C. Furthermore, the hydrogen/oxygen production rate was increased by about 28.2% at 1.60 V and 80°C. The durability test demonstrated that the surface treated TT-LGDL has good stability as well. Finally, the gold electroplating surface treatment is a promising method for the PEMEC performance enhancement and titanium material protection even in harsh environment.

View Accepted Manuscript (DOE)

View Accepted Manuscript (Publisher)

Cite

Export

Save

Research Organization:: National Renewable Energy Lab. (NREL), Golden, CO (United States); Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

Sponsoring Organization:: USDOE Office of Energy Efficiency and Renewable Energy (EERE)

Grant/Contract Number:: AC36-08GO28308; FE0011585; AC05-00OR22725

OSTI ID:: 1393374

Alternate ID(s):: OSTI ID: 1435298; OSTI ID: 1549960; OSTI ID: 1784216

Report Number(s):: NREL/JA-5900-70128

Journal Information:: Applied Energy, Vol. 206, Issue C; ISSN 0306-2619

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

Citation Metrics:

Cited by: 43 works

Citation information provided by
Web of Science

References (57)

Thin liquid/gas diffusion layers for high-efficiency hydrogen production from water splitting Mo, Jingke; Kang, Zhenye; Yang, Gaoqiang Applied Energy, Vol. 177 https://doi.org/10.1016/j.apenergy.2016.05.154	journal	September 2016
Analysis and comparison between a concentrating solar and a photovoltaic power plant Desideri, Umberto; Campana, Pietro Elia Applied Energy, Vol. 113 https://doi.org/10.1016/j.apenergy.2013.07.046	journal	January 2014
Synthesis of mesoporous titania thin films (MTTFs) with two different structures as photocatalysts for generating hydrogen from water splitting Liao, Yu-Te; Huang, Chao-Wei; Liao, Chi-Hung Applied Energy, Vol. 100 https://doi.org/10.1016/j.apenergy.2012.02.053	journal	December 2012
Discovery of true electrochemical reactions for ultrahigh catalyst mass activity in water splitting Mo, Jingke; Kang, Zhenye; Retterer, Scott T. Science Advances, Vol. 2, Issue 11 https://doi.org/10.1126/sciadv.1600690	journal	November 2016
Theoretical Investigation of the Metal-Doped SrTiO ₃ Photocatalysts for Water Splitting Chen, Hsin-Chieh; Huang, Chao-Wei; Wu, Jeffrey C. S. The Journal of Physical Chemistry C, Vol. 116, Issue 14 https://doi.org/10.1021/jp300910e	journal	March 2012
Theoretical study and performance evaluation of hydrogen production by 200 W solid oxide electrolyzer stack Penchini, Daniele; Cinti, Giovanni; Discepoli, Gabriele International Journal of Hydrogen Energy, Vol. 39, Issue 17 https://doi.org/10.1016/j.ijhydene.2014.04.052	journal	June 2014
Clean, efficient and affordable energy for a sustainable future Yan, J.; Shamim, T.; Chou, S. K. Applied Energy, Vol. 185 https://doi.org/10.1016/j.apenergy.2016.06.005	journal	January 2017
A review on compressed air energy storage: Basic principles, past milestones and recent developments Budt, Marcus; Wolf, Daniel; Span, Roland Applied Energy, Vol. 170 https://doi.org/10.1016/j.apenergy.2016.02.108	journal	May 2016
Sustainable development of energy, water and environment systems Duić, Neven; Guzović, Zvonimir; Kafarov, Vyatcheslav Applied Energy, Vol. 101 https://doi.org/10.1016/j.apenergy.2012.08.002	journal	January 2013
Design and Testing of a Unitized Regenerative Fuel Cell Fall, Jeremy; Humphreys, Drew; Guo, S. M. Journal of Fuel Cell Science and Technology, Vol. 6, Issue 3 https://doi.org/10.1115/1.3005575	journal	May 2009
Oxygen electrocatalysts for water electrolyzers and reversible fuel cells: status and perspective Park, Sehkyu; Shao, Yuyan; Liu, Jun Energy & Environmental Science, Vol. 5, Issue 11 https://doi.org/10.1039/c2ee22554a	journal	January 2012
A Realizable Renewable Energy Future Turner, J. A. Science, Vol. 285, Issue 5428 https://doi.org/10.1126/science.285.5428.687	journal	July 1999
Design and testing of a compact PEM electrolyzer system Briguglio, N.; Brunaccini, G.; Siracusano, S. International Journal of Hydrogen Energy, Vol. 38, Issue 26 https://doi.org/10.1016/j.ijhydene.2013.04.091	journal	August 2013
Hydrogen Production from Semiconductor-based Photocatalysis via Water Splitting Liao, Chi-Hung; Huang, Chao-Wei; Wu, Jeffrey C. S. Catalysts, Vol. 2, Issue 4 https://doi.org/10.3390/catal2040490	journal	October 2012
Smart grids, renewable energy integration, and climate change mitigation – Future electric energy systems Wang, Jianhui; Conejo, Antonio J.; Wang, Chengshan Applied Energy, Vol. 96 https://doi.org/10.1016/j.apenergy.2012.03.014	journal	August 2012
Comparative Study of Battery Storage and Hydrogen Storage to Increase Photovoltaic Self-sufficiency in a Residential Building of Sweden Zhang, Yang; Lundblad, Anders; Campana, Pietro Elia Energy Procedia, Vol. 103 https://doi.org/10.1016/j.egypro.2016.11.284	journal	December 2016
Effects of membrane electrode assembly properties on two-phase transport and performance in proton exchange membrane electrolyzer cells Han, Bo; Mo, Jingke; Kang, Zhenye Electrochimica Acta, Vol. 188 https://doi.org/10.1016/j.electacta.2015.11.139	journal	January 2016
Numerical investigations on ethanol electrolysis for production of pure hydrogen from renewable sources Ehteshami, S. Mohsen Mousavi; Vignesh, S.; Rasheed, R. K. A. Applied Energy, Vol. 170 https://doi.org/10.1016/j.apenergy.2016.03.001	journal	May 2016
Computational fluid dynamics approach for performance evaluation of a solid oxide electrolysis cell for hydrogen production Navasa, Maria; Yuan, Jinliang; Sundén, Bengt Applied Energy, Vol. 137 https://doi.org/10.1016/j.apenergy.2014.04.104	journal	January 2015
Evaluation of nitrided titanium separator plates for proton exchange membrane electrolyzer cells Toops, Todd J.; Brady, Michael P.; Zhang, Feng-Yuan Journal of Power Sources, Vol. 272 https://doi.org/10.1016/j.jpowsour.2014.09.016	journal	December 2014
Electrochemical characterization of a PEM water electrolyzer based on a sulfonated polysulfone membrane Siracusano, S.; Baglio, V.; Lufrano, F. Journal of Membrane Science, Vol. 448 https://doi.org/10.1016/j.memsci.2013.07.058	journal	December 2013
CO 2 capture with the absorbent of a mixed ionic liquid and amine solution considering the effects of SO 2 and O 2 Yang, Jie; Yu, Xinhai; An, Lin Applied Energy, Vol. 194 https://doi.org/10.1016/j.apenergy.2017.02.071	journal	May 2017
Enhanced performance and durability of low catalyst loading PEM water electrolyser based on a short-side chain perfluorosulfonic ionomer Siracusano, Stefania; Baglio, Vincenzo; Van Dijk, Nicholas Applied Energy, Vol. 192 https://doi.org/10.1016/j.apenergy.2016.09.011	journal	April 2017
Review of the membrane and bipolar plates materials for conventional and unitized regenerative fuel cells Dihrab, Salwan S.; Sopian, K.; Alghoul, M. A. Renewable and Sustainable Energy Reviews, Vol. 13, Issue 6-7 https://doi.org/10.1016/j.rser.2008.09.029	journal	August 2009
Modeling of interfacial resistance effects on the performance and efficiency for electrolyzer energy storage Han, Bo; Steen, Stuart; Mo, Jingke 13th International Energy Conversion Engineering Conference https://doi.org/10.2514/6.2015-3915	conference	July 2015
Rapid prototyping of electrolyzer flow field plates Hudkins, Jesse R.; Wheeler, Danika G.; Peña, Bruno Energy & Environmental Science, Vol. 9, Issue 11 https://doi.org/10.1039/C6EE01997H	journal	January 2016
Preferential thermal nitridation to form pin-hole free Cr-nitrides to protect proton exchange membrane fuel cell metallic bipolar plates Brady, M. P.; Weisbrod, K.; Paulauskas, I. Scripta Materialia, Vol. 50, Issue 7 https://doi.org/10.1016/j.scriptamat.2003.12.028	journal	April 2004
System integration, durability and reliability of fuel cells: Challenges and solutions Wang, Junye Applied Energy, Vol. 189 https://doi.org/10.1016/j.apenergy.2016.12.083	journal	March 2017
Optimization of perfluorosulphonic ionomer amount in gas diffusion electrodes for PEMFC operation under automotive conditions Gatto, I.; Stassi, A.; Baglio, V. Electrochimica Acta, Vol. 165 https://doi.org/10.1016/j.electacta.2015.03.068	journal	May 2015
Analysis of water transport in a high pressure PEM electrolyzer Medina, P.; Santarelli, M. International Journal of Hydrogen Energy, Vol. 35, Issue 11 https://doi.org/10.1016/j.ijhydene.2010.02.130	journal	June 2010
Dynamic modelling of a proton exchange membrane (PEM) electrolyzer Gorgun, H. International Journal of Hydrogen Energy, Vol. 31, Issue 1 https://doi.org/10.1016/j.ijhydene.2005.04.001	journal	January 2006
Additive manufacturing of liquid/gas diffusion layers for low-cost and high-efficiency hydrogen production Mo, Jingke; Dehoff, Ryan R.; Peter, William H. International Journal of Hydrogen Energy, Vol. 41, Issue 4 https://doi.org/10.1016/j.ijhydene.2015.12.111	journal	January 2016
A comprehensive review on PEM water electrolysis Carmo, Marcelo; Fritz, David L.; Mergel, Jürgen International Journal of Hydrogen Energy, Vol. 38, Issue 12, p. 4901-4934 https://doi.org/10.1016/j.ijhydene.2013.01.151	journal	April 2013
Additive manufactured bipolar plate for high-efficiency hydrogen production in proton exchange membrane electrolyzer cells Yang, Gaoqiang; Mo, Jingke; Kang, Zhenye International Journal of Hydrogen Energy, Vol. 42, Issue 21 https://doi.org/10.1016/j.ijhydene.2017.04.100	journal	May 2017
Electrochemical investigation of stainless steel corrosion in a proton exchange membrane electrolyzer cell Mo, Jingke; Steen, Stuart M.; Zhang, Feng-Yuan International Journal of Hydrogen Energy, Vol. 40, Issue 36 https://doi.org/10.1016/j.ijhydene.2015.07.061	journal	September 2015
Effect of titanium powder loading in gas diffusion layer of a polymer electrolyte unitized reversible fuel cell Hwang, Chul Min; Ishida, Masayoshi; Ito, Hiroshi Journal of Power Sources, Vol. 202 https://doi.org/10.1016/j.jpowsour.2011.11.041	journal	March 2012
Experimental study on porous current collectors of PEM electrolyzers Ito, Hiroshi; Maeda, Tetsuhiko; Nakano, Akihiro International Journal of Hydrogen Energy, Vol. 37, Issue 9 https://doi.org/10.1016/j.ijhydene.2012.01.095	journal	May 2012
Influence of pore structural properties of current collectors on the performance of proton exchange membrane electrolyzer Ito, Hiroshi; Maeda, Tetsuhiko; Nakano, Akihiro Electrochimica Acta, Vol. 100 https://doi.org/10.1016/j.electacta.2012.05.068	journal	June 2013
Investigation of titanium liquid/gas diffusion layers in proton exchange membrane electrolyzer cells Steen, Stuart M.; Mo, Jingke; Kang, Zhenye International Journal of Green Energy, Vol. 14, Issue 2 https://doi.org/10.1080/15435075.2016.1253582	journal	November 2016
Influence of properties of gas diffusion layers on the performance of polymer electrolyte-based unitized reversible fuel cells Hwang, Chul Min; Ishida, Masayoshi; Ito, Hiroshi International Journal of Hydrogen Energy, Vol. 36, Issue 2 https://doi.org/10.1016/j.ijhydene.2010.10.091	journal	January 2011
Optimization of porous current collectors for PEM water electrolysers Grigoriev, S. A.; Millet, P.; Volobuev, S. A. International Journal of Hydrogen Energy, Vol. 34, Issue 11 https://doi.org/10.1016/j.ijhydene.2008.11.056	journal	June 2009
Influence of PTFE coating on gas diffusion backing for unitized regenerative polymer electrolyte fuel cells Ioroi, Tsutomu; Oku, Takanori; Yasuda, Kazuaki Journal of Power Sources, Vol. 124, Issue 2 https://doi.org/10.1016/S0378-7753(03)00795-X	journal	November 2003
GenHyPEM: A research program on PEM water electrolysis supported by the European Commission Millet, Pierre; Dragoe, Diana; Grigoriev, Serguey International Journal of Hydrogen Energy, Vol. 34, Issue 11 https://doi.org/10.1016/j.ijhydene.2008.11.114	journal	June 2009
Effects of pore size gradient in the substrate of a gas diffusion layer on the performance of a proton exchange membrane fuel cell Oh, Hwanyeong; Park, Jaeman; Min, Kyoungdoug Applied Energy, Vol. 149 https://doi.org/10.1016/j.apenergy.2015.03.072	journal	July 2015
Investigation of titanium felt transport parameters for energy storage and hydrogen/oxygen production Mo, Jingke; Steen, Stuart; Han, Bo 13th International Energy Conversion Engineering Conference https://doi.org/10.2514/6.2015-3914	conference	July 2015
Mask-Patterned Wet Etching of Thin Titanium Liquid/Gas Diffusion Layers for a PEMEC Mo, J.; Steen, S. M.; Retterer, S. ECS Transactions, Vol. 66, Issue 24 https://doi.org/10.1149/06624.0003ecst	journal	August 2015
Performance of a metallic gas diffusion layer for PEM fuel cells Zhang, Feng-Yuan; Advani, Suresh G.; Prasad, Ajay K. Journal of Power Sources, Vol. 176, Issue 1 https://doi.org/10.1016/j.jpowsour.2007.10.055	journal	January 2008
Investigation of a copper etching technique to fabricate metallic gas diffusion media Zhang, Feng-Yuan; Prasad, Ajay K.; Advani, Suresh G. Journal of Micromechanics and Microengineering, Vol. 16, Issue 11 https://doi.org/10.1088/0960-1317/16/11/N02	journal	September 2006
Investigation of thin/well-tunable liquid/gas diffusion layers exhibiting superior multifunctional performance in low-temperature electrolytic water splitting Kang, Zhenye; Mo, Jingke; Yang, Gaoqiang Energy & Environmental Science, Vol. 10, Issue 1 https://doi.org/10.1039/C6EE02368A	journal	January 2017
Membrane electrode assemblies with low noble metal loadings for hydrogen production from solid polymer electrolyte water electrolysis Su, Huaneng; Linkov, Vladimir; Bladergroen, Bernard Jan International Journal of Hydrogen Energy, Vol. 38, Issue 23 https://doi.org/10.1016/j.ijhydene.2013.05.099	journal	August 2013
Optimum structural properties for an anode current collector used in a polymer electrolyte membrane water electrolyzer operated at the boiling point of water Li, Hua; Fujigaya, Tsuyohiko; Nakajima, Hironori Journal of Power Sources, Vol. 332 https://doi.org/10.1016/j.jpowsour.2016.09.086	journal	November 2016
Proton exchange membrane electrolysis sustained by water vapor Spurgeon, Joshua M.; Lewis, Nathan S. Energy & Environmental Science, Vol. 4, Issue 8 https://doi.org/10.1039/c1ee01203g	journal	January 2011
IrO2 coated TiO2 nanopore arrays electrode for SPE HBr electrolysis Zhang, Linsong; Shao, Zhi-Gang; Yu, Hongmei Journal of Electroanalytical Chemistry, Vol. 688 https://doi.org/10.1016/j.jelechem.2012.08.008	journal	January 2013
Analytical modelling of boiling phase change phenomenon in high-temperature proton exchange membrane fuel cells during warm-up process Abdul Rasheed, Raj Kamal; Ehteshami, Seyyed Mohsen Mousavi; Chan, Siew Hwa International Journal of Hydrogen Energy, Vol. 39, Issue 5 https://doi.org/10.1016/j.ijhydene.2013.11.103	journal	February 2014
Behaviors of a proton exchange membrane electrolyzer under water starvation Sun, Shucheng; Xiao, Yu; Liang, Dong RSC Advances, Vol. 5, Issue 19 https://doi.org/10.1039/C4RA14104K	journal	January 2015
Electrical resistivity of titanium in the temperature range from 290 to 1800 K Bel’skaya, E. A.; Kulyamina, E. Yu. High Temperature, Vol. 45, Issue 6 https://doi.org/10.1134/S0018151X07060090	journal	December 2007
Study of catalyst sprayed membrane under irradiation method to prepare high performance membrane electrode assemblies for solid polymer electrolyte water electrolysis Su, Huaneng; Bladergroen, Bernard Jan; Linkov, Vladimir International Journal of Hydrogen Energy, Vol. 36, Issue 23 https://doi.org/10.1016/j.ijhydene.2011.08.057	journal	November 2011

Cited By (2)

One‐Step Fabrication of Ultralow Pt Loading High Efficiency Proton Exchange Membrane for Water Electrolysis by Conventional E‐Beam Metal Deposition Wang, Yanyan; Yu, Xue; Liu, Gen Advanced Sustainable Systems, Vol. 3, Issue 5 https://doi.org/10.1002/adsu.201900026	journal	April 2019
Facile electrochemical preparation of nonprecious Co‐Cu alloy catalysts for hydrogen production in proton exchange membrane water electrolysis Kim, Hoyoung; Park, Hyanjoo; Oh, Seonhwa International Journal of Energy Research, Vol. 44, Issue 4 https://doi.org/10.1002/er.5099	journal	December 2019

Similar Records

Novel thin/tunable gas diffusion electrodes with ultra-low catalyst loading for hydrogen evolution reactions in proton exchange membrane electrolyzer cells

Journal Article · Fri Mar 09 00:00:00 EST 2018 · Nano Energy · OSTI ID:1393374

Kang, Zhenye; Yang, Gaoqiang; Mo, Jingke; +9 more

Developing titanium micro/nano porous layers on planar thin/tunable LGDLs for high-efficiency hydrogen production

Journal Article · Thu Jun 21 00:00:00 EDT 2018 · International Journal of Hydrogen Energy · OSTI ID:1393374

Kang, Zhenye; Yang, Gaoqiang; Mo, Jingke; +9 more

Performance improvement of proton exchange membrane electrolyzer cells by introducing in-plane transport enhancement layers

Journal Article · Wed May 22 00:00:00 EDT 2019 · Electrochimica Acta · OSTI ID:1393374

Kang, Zhenye; Yu, Shule; Yang, Gaoqiang; +5 more

Related Subjects

08 HYDROGEN
36 MATERIALS SCIENCE
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CHEMISTRY
liquid/gas diffusion layers
surface treatment
proton exchange membrane electrolyzer cells
electroplating
water splitting
hydrogen/oxygen production

Title: Thin film surface modifications of thin/tunable liquid/gas diffusion layers for high-efficiency proton exchange membrane electrolyzer cells

Citation Formats

References (57)

Cited By (2)

Similar Records

Related Subjects