skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Role of Crystallization in the Morphology of Polymer: Non-fullerene Acceptor Bulk Heterojunctions

Journal Article · · ACS Applied Materials and Interfaces
 [1];  [2];  [3];  [1];  [4];  [3];  [1]
  1. Univ. of California, Santa Barbara, CA (United States)
  2. Univ. of Colorado, Boulder, CO (United States); National Renewable Energy Lab. (NREL), Golden, CO (United States)
  3. Colorado School of Mines, Golden, CO (United States)
  4. Univ. of Colorado, Boulder, CO (United States)

Many high efficiency organic photovoltaics use fullerene-based acceptors despite their high production cost, weak optical absorption in the visible range, and limited synthetic variability of electronic and optical properties. To circumvent this deficiency, non-fullerene small-molecule acceptors have been developed that have good synthetic flexibility, allowing for precise tuning of optoelectronic properties, leading to enhanced absorption of the solar spectrum and increased open-circuit voltages (VOC). We examined the detailed morphology of bulk heterojunctions of poly(3-hexylthiophene) and the small-molecule acceptor HPI-BT to reveal structural changes that lead to improvements in the fill factor of solar cells upon thermal annealing. The kinetics of the phase transformation process of HPI-BT during thermal annealing were investigated through in situ grazing incidence wide-angle X-ray scattering studies, atomic force microscopy, and transmission electron microscopy. The HPI-BT acceptor crystallizes during film formation to form micron-sized domains embedded within the film center and a donor rich capping layer at the cathode interface reducing efficient charge extraction. Thermal annealing changes the surface composition and improves charge extraction. In conclusion, this study reveals the need for complementary methods to investigate the morphology of BHJs.

Research Organization:
National Renewable Energy Lab. (NREL), Golden, CO (United States)
Sponsoring Organization:
USDOE Office of Energy Efficiency and Renewable Energy (EERE)
Grant/Contract Number:
AC36-08GO28308
OSTI ID:
1364166
Report Number(s):
NREL/JA-5K00-68704; TRN: US1701983
Journal Information:
ACS Applied Materials and Interfaces, Vol. 9, Issue 22; ISSN 1944-8244
Publisher:
American Chemical Society (ACS)Copyright Statement
Country of Publication:
United States
Language:
English
Citation Metrics:
Cited by: 12 works
Citation information provided by
Web of Science

References (68)

Photovoltaic Effect and Photoconductivity in Laminated Organic Systems journal October 1958
Two‐layer organic photovoltaic cell journal January 1986
High‐efficiency organic solar cells journal April 1978
Charge separation and photovoltaic conversion in polymer composites with internal donor/acceptor heterojunctions journal October 1995
Efficient photodiodes from interpenetrating polymer networks journal August 1995
“Plastic” Solar Cells: Self-Assembly of Bulk Heterojunction Nanomaterials by Spontaneous Phase Separation journal November 2009
25th Anniversary Article: Bulk Heterojunction Solar Cells: Understanding the Mechanism of Operation journal December 2013
Design Rules for Donors in Bulk-Heterojunction Solar Cells—Towards 10 % Energy-Conversion Efficiency journal March 2006
Development of Novel Conjugated Donor Polymers for High-Efficiency Bulk-Heterojunction Photovoltaic Devices journal November 2009
Highly Efficient 2D-Conjugated Benzodithiophene-Based Photovoltaic Polymer with Linear Alkylthio Side Chain journal June 2014
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells journal November 2014
10.8% Efficiency Polymer Solar Cells Based on PTB7-Th and PC 71 BM via Binary Solvent Additives Treatment journal July 2016
Ultrafast spectroscopic studies of photoinduced electron transfer from semiconducting polymers to C 60 journal December 1994
Subpicosecond photoinduced electron transfer from conjugated polymers to functionalized fullerenes journal March 1996
Tracing photoinduced electron transfer process in conjugated polymer/fullerene bulk heterojunctions in real time journal June 2001
Non-Fullerene Acceptor-Based Bulk Heterojunction Polymer Solar Cells: Engineering the Nanomorphology via Processing Additives journal August 2011
A 3D star-shaped non-fullerene acceptor for solution-processed organic solar cells with a high open-circuit voltage of 1.18 V journal January 2012
Nonplanar Perylene Diimides as Potential Alternatives to Fullerenes in Organic Solar Cells journal August 2012
Integrated Molecular, Interfacial, and Device Engineering towards High-Performance Non-Fullerene Based Organic Solar Cells journal June 2014
Spiro Linkage as an Alternative Strategy for Promising Nonfullerene Acceptors in Organic Solar Cells journal August 2015
High-performance fullerene-free polymer solar cells with 6.31% efficiency journal January 2015
Molecular helices as electron acceptors in high-performance bulk heterojunction solar cells journal September 2015
Non-Fullerene Organic Solar Cells with 6.1% Efficiency through Fine-Tuning Parameters of the Film-Forming Process journal December 2014
A Tetraphenylethylene Core-Based 3D Structure Small Molecular Acceptor Enabling Efficient Non-Fullerene Organic Solar Cells journal November 2014
High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor journal June 2016
A spirobifluorene and diketopyrrolopyrrole moieties based non-fullerene acceptor for efficient and thermally stable polymer solar cells with high open-circuit voltage journal January 2016
Covalently Bound Clusters of Alpha-Substituted PDI—Rival Electron Acceptors to Fullerene for Organic Solar Cells journal June 2016
A Nonfullerene Small Molecule Acceptor with 3D Interlocking Geometry Enabling Efficient Organic Solar Cells journal November 2015
A Solution-Processable Electron Acceptor Based on Dibenzosilole and Diketopyrrolopyrrole for Organic Solar Cells journal March 2013
Fullerene-Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability journal April 2016
Side-Chain Isomerization on an n-type Organic Semiconductor ITIC Acceptor Makes 11.77% High Efficiency Polymer Solar Cells journal November 2016
Non-Fullerene Polymer Solar Cells Based on Alkylthio and Fluorine Substituted 2D-Conjugated Polymers Reach 9.5% Efficiency journal March 2016
New Wide Band Gap Donor for Efficient Fullerene-Free All-Small-Molecule Organic Solar Cells journal January 2017
2.5% efficient organic plastic solar cells journal February 2001
Nanoscale Morphology of High-Performance Polymer Solar Cells journal April 2005
Phase Separation in Bulk Heterojunctions of Semiconducting Polymers and Fullerenes for Photovoltaics journal April 2014
Polymer Crystallization of Partially Miscible Polythiophene/Fullerene Mixtures Controls Morphology journal July 2011
Fullerenecrystallisation as a key driver of charge separation in polymer/fullerene bulk heterojunction solar cells journal January 2012
Perylene–Diimide Based Non-Fullerene Solar Cells with 4.34% Efficiency through Engineering Surface Donor/Acceptor Compositions journal April 2014
New polymer acceptors for organic solar cells: the effect of regio-regularity and device configuration journal January 2013
Polythiophene:Perylene Diimide Solar Cells - the Impact of Alkyl-Substitution on the Photovoltaic Performance journal January 2011
Binary additives synergistically boost the efficiency of all-polymer solar cells up to 3.45% journal January 2014
Solution-Processed Organic Solar Cells with Power Conversion Efficiencies of 2.5% using Benzothiadiazole/Imide-Based Acceptors journal December 2011
Comparing the Device Physics and Morphology of Polymer Solar Cells Employing Fullerenes and Non-Fullerene Acceptors journal April 2014
Effects of Thermal Annealing Upon the Morphology of Polymer-Fullerene Blends journal August 2010
Influence of substrate on crystallization in polythiophene/fullerene blends journal May 2011
Interdiffusion of PCBM and P3HT Reveals Miscibility in a Photovoltaically Active Blend journal November 2010
Drastic Control of Texture in a High Performance n-Type Polymeric Semiconductor and Implications for Charge Transport journal July 2011
Crystallization-Induced Phase Separation in Solution-Processed Small Molecule Bulk Heterojunction Organic Solar Cells journal February 2014
Phase Transitions and Anisotropic Thermal Expansion in High Mobility Core-expanded Naphthalene Diimide Thin Film Transistors journal September 2014
Quantitative Determination of Organic Semiconductor Microstructure from the Molecular to Device Scale journal June 2012
Quantitative analysis of lattice disorder and crystallite size in organic semiconductor thin films journal July 2011
Effect of Mesoscale Crystalline Structure on the Field-Effect Mobility of Regioregular Poly(3-hexyl thiophene) in Thin-Film Transistors journal April 2005
Substrate-dependent interface composition and charge transport in films for organic photovoltaics journal June 2009
Vertical Phase Separation in Poly(3-hexylthiophene): Fullerene Derivative Blends and its Advantage for Inverted Structure Solar Cells journal April 2009
Surfaces of polymer blends: X‐ray photoelectron spectroscopy studies of polystyrene/poly(vinyl methyl ether) blends journal October 1985
Linking Vertical Bulk-Heterojunction Composition and Transient Photocurrent Dynamics in Organic Solar Cells with Solution-Processed MoO x Contact Layers journal October 2013
Interfacial Characteristics of Efficient Bulk Heterojunction Solar Cells Fabricated on MoO x Anode Interlayers journal October 2015
The Importance of Fullerene Percolation in the Mixed Regions of Polymer-Fullerene Bulk Heterojunction Solar Cells journal October 2012
Effect of Processing Additive on the Nanomorphology of a Bulk Heterojunction Material journal October 2010
The Role of Solvent Additive Processing in High Performance Small Molecule Solar Cells journal November 2014
Nanoscale Morphology of Conjugated Polymer/Fullerene-Based Bulk- Heterojunction Solar Cells journal October 2004
Predicting Morphologies of Solution Processed Polymer:Fullerene Blends journal July 2013
Polymer−Electrode Interfacial Effect on Photovoltaic Performances in Poly(3-hexylthiophene):Phenyl-C61-butyric Acid Methyl Ester Based Solar Cells journal August 2009
Influence of Hole-Transport Layers and Donor Materials on Open-Circuit Voltage and Shape of I-V Curves of Organic Solar Cells journal April 2011
Understanding the origin of the S-curve in conjugated polymer/fullerene photovoltaics from drift-diffusion simulations journal July 2013
Tail State-Assisted Charge Injection and Recombination at the Electron-Collecting Interface of P3HT:PCBM Bulk-Heterojunction Polymer Solar Cells journal July 2012
Factors Limiting Device Efficiency in Organic Photovoltaics journal December 2012

Cited By (3)

A photochemical layer-by-layer solution process for preparing organic semiconducting thin films having the right material at the right place journal January 2018
Efficiency enhancements in non-fullerene acceptor-based organic solar cells by post-additive soaking journal January 2019
A review of non-fullerene polymer solar cells: from device physics to morphology control journal February 2019