A method for simultaneous linear optics and coupling correction for storage rings with turn-by-turn beam position monitor data

Yang, Xi; Huang, Xiaobiao

doi:10.1016/j.nima.2016.05.020

Title: A method for simultaneous linear optics and coupling correction for storage rings with turn-by-turn beam position monitor data

Abstract

Here, we propose a method to simultaneously correct linear optics errors and linear coupling for storage rings using turn-by-turn (TbT) beam position monitor (BPM) data. The independent component analysis (ICA) method is used to isolate the betatron normal modes from the measured TbT BPM data. The betatron amplitudes and phase advances of the projections of the normal modes on the horizontal and vertical planes are then extracted, which, combined with dispersion measurement, are used to fit the lattice model. The fitting results are used for lattice correction. Finally, the method has been successfully demonstrated on the NSLS-II storage ring.

Authors:

Yang, Xi ^[1]; Huang, Xiaobiao ^[2]

Brookhaven National Lab. (BNL), Upton, NY (United States)
SLAC National Accelerator Lab., Menlo Park, CA (United States)

Publication Date:: Fri May 13 00:00:00 EDT 2016

Research Org.:: Brookhaven National Laboratory (BNL), Upton, NY (United States)

Sponsoring Org.:: USDOE Office of Science (SC), Basic Energy Sciences (BES)

OSTI Identifier:: 1340367

Alternate Identifier(s):: OSTI ID: 1326712

Report Number(s):: BNL-112293-2016-JA
Journal ID: ISSN 0168-9002

Grant/Contract Number:: SC00112704; AC02–98CH10886; AC02–76SF00515

Resource Type:: Journal Article: Accepted Manuscript

Journal Name:: Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment

Additional Journal Information:: Journal Volume: 828; Journal Issue: C; Journal ID: ISSN 0168-9002

Publisher:: Elsevier

Country of Publication:: United States

Language:: English

Subject:: 43 PARTICLE ACCELERATORS; optics correction; turn-by-turn; BPM

Citation Formats


                    Yang, Xi, and Huang, Xiaobiao. A method for simultaneous linear optics and coupling correction for storage rings with turn-by-turn beam position monitor data.  United States: N. p., 2016. 
        Web.  doi:10.1016/j.nima.2016.05.020.

Copy to clipboard


                    Yang, Xi, & Huang, Xiaobiao. A method for simultaneous linear optics and coupling correction for storage rings with turn-by-turn beam position monitor data.  United States.  https://doi.org/10.1016/j.nima.2016.05.020

Copy to clipboard


                    Yang, Xi, and Huang, Xiaobiao. 2016.  
        "A method for simultaneous linear optics and coupling correction for storage rings with turn-by-turn beam position monitor data".  United States.  https://doi.org/10.1016/j.nima.2016.05.020.  https://www.osti.gov/servlets/purl/1340367.

Copy to clipboard


                    
@article{osti_1340367,

  title        = {A method for simultaneous linear optics and coupling correction for storage rings with turn-by-turn beam position monitor data},

  author       = {Yang, Xi and Huang, Xiaobiao},

  abstractNote = {Here, we propose a method to simultaneously correct linear optics errors and linear coupling for storage rings using turn-by-turn (TbT) beam position monitor (BPM) data. The independent component analysis (ICA) method is used to isolate the betatron normal modes from the measured TbT BPM data. The betatron amplitudes and phase advances of the projections of the normal modes on the horizontal and vertical planes are then extracted, which, combined with dispersion measurement, are used to fit the lattice model. The fitting results are used for lattice correction. Finally, the method has been successfully demonstrated on the NSLS-II storage ring.},

  doi          = {10.1016/j.nima.2016.05.020},

  url          = {https://www.osti.gov/biblio/1340367},
  journal      = {Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment},

  issn         = {0168-9002},

  number       = C,

  volume       = 828,

  place        = {United States},

  year         = {Fri May 13 00:00:00 EDT 2016},

  month        = {Fri May 13 00:00:00 EDT 2016}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Accepted Manuscript (DOE)

Publisher's Version of Record

https://doi.org/10.1016/j.nima.2016.05.020

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 5 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

Experimental determination of storage ring optics using orbit response measurements
journal, March 1997

Safranek, J.
Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 388, Issue 1-2
https://doi.org/10.1016/S0168-9002(97)00309-4

Phase advance and $β$ function measurements using model-independent analysis
journal, October 2003

Wang, Chun-xi; Sajaev, Vadim; Yao, Chih-Yuan
Physical Review Special Topics - Accelerators and Beams, Vol. 6, Issue 10
https://doi.org/10.1103/PhysRevSTAB.6.104001

Application of independent component analysis to Fermilab Booster
journal, June 2005

Huang, Xiaobiao; Lee, S. Y.; Prebys, Eric
Physical Review Special Topics - Accelerators and Beams, Vol. 8, Issue 6
https://doi.org/10.1103/PhysRevSTAB.8.064001

First $β$ -beating measurement and optics analysis for the CERN Large Hadron Collider
journal, August 2009

Aiba, M.; Fartoukh, S.; Franchi, A.
Physical Review Special Topics - Accelerators and Beams, Vol. 12, Issue 8
https://doi.org/10.1103/PhysRevSTAB.12.081002

Application of independent component analysis to ac dipole based optics measurement and correction at the Relativistic Heavy Ion Collider
journal, November 2013

Shen, X.; Lee, S. Y.; Bai, M.
Physical Review Special Topics - Accelerators and Beams, Vol. 16, Issue 11
https://doi.org/10.1103/PhysRevSTAB.16.111001

Comparison of linear optics measurement and correction methods at the Swiss Light Source
journal, January 2013

Aiba, M.; Böge, M.; Chrin, J.
Physical Review Special Topics - Accelerators and Beams, Vol. 16, Issue 1
https://doi.org/10.1103/PhysRevSTAB.16.012802

Driving term experiments at CERN
journal, March 2007

Benedikt, M.; Schmidt, F.; Tomás, R.
Physical Review Special Topics - Accelerators and Beams, Vol. 10, Issue 3
https://doi.org/10.1103/PhysRevSTAB.10.034002

Vertical-beam emittance correction with independent component analysis method
journal, May 2008

Wang, F.; Lee, S. Y.
Physical Review Special Topics - Accelerators and Beams, Vol. 11, Issue 5
https://doi.org/10.1103/PhysRevSTAB.11.050701

Vertical emittance reduction and preservation in electron storage rings via resonance driving terms correction
journal, March 2011

Franchi, A.; Farvacque, L.; Chavanne, J.
Physical Review Special Topics - Accelerators and Beams, Vol. 14, Issue 3
https://doi.org/10.1103/PhysRevSTAB.14.034002

Lattice modeling and calibration with turn-by-turn orbit data
journal, November 2010

Huang, Xiaobiao; Sebek, Jim; Martin, Don
Physical Review Special Topics - Accelerators and Beams, Vol. 13, Issue 11
https://doi.org/10.1103/PhysRevSTAB.13.114002

CERN Large Hadron Collider optics model, measurements, and corrections
journal, December 2010

Tomás, R.; Brüning, O.; Giovannozzi, M.
Physical Review Special Topics - Accelerators and Beams, Vol. 13, Issue 12
https://doi.org/10.1103/PhysRevSTAB.13.121004

Linear analysis of coupled lattices
journal, July 1999

Sagan, D.; Rubin, D.
Physical Review Special Topics - Accelerators and Beams, Vol. 2, Issue 7
https://doi.org/10.1103/PhysRevSTAB.2.074001

Linear coupling parametrization in the action-angle frame
journal, December 2004

Luo, Yun
Physical Review Special Topics - Accelerators and Beams, Vol. 7, Issue 12
https://doi.org/10.1103/PhysRevSTAB.7.124001

LOCO Application to NSLSII SR Dispersion and Beta Beating Correction
report, August 2014

Yang, Xi; Huang, Xiaobiao; Safranek, James A.
https://doi.org/10.2172/1505094

Similar records in OSTI.GOV collections:

A method for simultaneous linear optics and coupling correction for storage rings with turn-by-turn beam position monitor data

Journal Article Yang, Xi; Huang, Xiaobiao - Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment

We propose a method to simultaneously correct linear optics errors and linear coupling for storage rings using turn-by-turn (TbT) beam position monitor (BPM) data. The independent component analysis (ICA) method is used to isolate the betatron normal modes from the measured TbT BPM data. The betatron amplitudes and phase advances of the projections of the normal modes on the horizontal and vertical planes are then extracted, which, combined with dispersion measurement, are used to fit the lattice model. The fitting results are used for lattice correction. The method has been successfully demonstrated on the NSLS-II storage ring.
https://doi.org/10.1016/j.nima.2016.05.020
A method for simultaneous linear optics and coupling correction for storage rings with turn-by-turn beam position monitor data

Journal Article Yang, Xi; Huang, Xiaobiao - Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment

We propose a method to simultaneously correct linear optics errors and linear coupling for storage rings using turn-by-turn (TbT) beam position monitor (BPM) data. The independent component analysis (ICA) method is used to isolate the betatron normal modes from the measured TbT BPM data. The betatron amplitudes and phase advances of the projections of the normal modes on the horizontal and vertical planes are then extracted, which, combined with dispersion measurement, are used to fit the lattice model. Furthermore, the fitting results are used for lattice correction. Our method has been successfully demonstrated on the NSLS-II storage ring.
https://doi.org/10.1016/j.nima.2016.05.020

Full Text Available
Applying Matlab LOCO to the NSLSII Storage Ring Commissioning

Technical Report Yang, Xi

Linear Optics from Closed Orbits (LOCO) has been a powerful beam-based diagnostics and optics control method for storage rings and synchrotrons worldwide ever since it was established at NSLS by J. Safranek. This method measures the orbit response matrix and optionally the dispersion function of the machine. The data are then fitted to a lattice model by adjusting parameters such as quadrupole and skew quadrupole strengths in the model, BPM gains and rolls, corrector gains and rolls of the measurement system. Any abnormality of the machine that affects the machine optics can then be identified. The resulting lattice model ismore »« less
https://doi.org/10.2172/1505092

Full Text Available
Beam Diagnosis and Lattice Modeling of the Fermilab Booster

Thesis/Dissertation Huang, Xiaobiao

A realistic lattice model is a fundamental basis for the operation of a synchrotron. In this study various beam-based measurements, including orbit response matrix (ORM) and BPM turn-by-turn data are used to verify and calibrate the lattice model of the Fermilab Booster. In the ORM study, despite the strong correlation between the gradient parameters of adjacent magnets which prevents a full determination of the model parameters, an equivalent lattice model is obtained by imposing appropriate constraints. The fitted gradient errors of the focusing magnets are within the design tolerance and the results point to the orbit offsets in the sextupolemore »« less
https://doi.org/10.2172/15020235

Full Text Available
Beam position monitor gate functionality implementation and applications

Journal Article Cheng, Weixing; Ha, Kiman; Li, Yongjun; ... - MethodsX

We introduce a novel technique to implement gate functionality for the beam position monitors (BPM) at the National Synchrotron Light Source II (NSLS-II). The functionality, now implemented in FPGA, allows us to acquire two separated bunch-trains’ synchronized turn-by-turn (TBT) data simultaneously with the NSLS-II in-house developed BPM system. The gated position resolution is improved about 3 times by narrowing the sampling width. Experimentally we demonstrated that the machine lattice could be transparently characterized with the gated TBT data of a short diagnostic bunch-train Cheng et al., 2017; Li et al., 2017. Other applications, for example, precisely characterizing storage ring impedance/wake-fieldmore »« less
https://doi.org/10.1016/j.mex.2018.06.006

Full Text Available

Similar Records

Title: A method for simultaneous linear optics and coupling correction for storage rings with turn-by-turn beam position monitor data

Abstract

Citation Formats

Experimental determination of storage ring optics using orbit response measurements journal, March 1997

Phase advance and β function measurements using model-independent analysis journal, October 2003

Application of independent component analysis to Fermilab Booster journal, June 2005

First β -beating measurement and optics analysis for the CERN Large Hadron Collider journal, August 2009

Application of independent component analysis to ac dipole based optics measurement and correction at the Relativistic Heavy Ion Collider journal, November 2013

Comparison of linear optics measurement and correction methods at the Swiss Light Source journal, January 2013

Driving term experiments at CERN journal, March 2007

Vertical-beam emittance correction with independent component analysis method journal, May 2008

Vertical emittance reduction and preservation in electron storage rings via resonance driving terms correction journal, March 2011

Lattice modeling and calibration with turn-by-turn orbit data journal, November 2010

CERN Large Hadron Collider optics model, measurements, and corrections journal, December 2010

Linear analysis of coupled lattices journal, July 1999

Linear coupling parametrization in the action-angle frame journal, December 2004

LOCO Application to NSLSII SR Dispersion and Beta Beating Correction report, August 2014

Experimental determination of storage ring optics using orbit response measurements
journal, March 1997

Phase advance and $β$ function measurements using model-independent analysis
journal, October 2003

Application of independent component analysis to Fermilab Booster
journal, June 2005

First $β$ -beating measurement and optics analysis for the CERN Large Hadron Collider
journal, August 2009

Application of independent component analysis to ac dipole based optics measurement and correction at the Relativistic Heavy Ion Collider
journal, November 2013

Comparison of linear optics measurement and correction methods at the Swiss Light Source
journal, January 2013

Driving term experiments at CERN
journal, March 2007

Vertical-beam emittance correction with independent component analysis method
journal, May 2008

Vertical emittance reduction and preservation in electron storage rings via resonance driving terms correction
journal, March 2011

Lattice modeling and calibration with turn-by-turn orbit data
journal, November 2010

CERN Large Hadron Collider optics model, measurements, and corrections
journal, December 2010

Linear analysis of coupled lattices
journal, July 1999

Linear coupling parametrization in the action-angle frame
journal, December 2004

LOCO Application to NSLSII SR Dispersion and Beta Beating Correction
report, August 2014